How it Works
Ganz
Loading...
ZN-S4000AE
Hardware Manual
21 pgs876.18 Kb0

Ganz ZN-S100AE, ZN-S2000AE, ZN-S1000AE, ZN-S4000AE Hardware Manual

Table of Contents
1. Introduction....................................................................................................................................... 4
2. Product Description ..........................................................................................................................5
2.1. Specifications............................................................................................................................ 5
2.2. Functions ..................................................................................................................................6
2.3. Serial Number / MAC Address............................................................................................... 13
3. Installation....................................................................................................................................... 14
3.1. Basic Connections ..................................................................................................................14
3.2. Package Contents.................................................................................................................... 15
3.3. Installation Example ...............................................................................................................16
4. Operation Description .................................................................................................................... 17
4.1. Factory Default Settings ......................................................................................................... 17
4.2. Rebooting................................................................................................................................ 17
5. Power over Ethernet (PoE) ............................................................................................................18
5.1. Features................................................................................................................................... 18
5.2. Mechanical characteristics......................................................................................................18
5.3. PoE compatibility ................................................................................................................... 19
5.4. Power classfication .................................................................................................................20
6. Electrical characteristics ................................................................................................................21
6.1. Operating conditions............................................................................................................... 21
6.2. Power consumption ................................................................................................................21
Safety Precautions
Users are strongly advised to adhere to directions and recommendations offered in this manual. Failure to do so may result in problems during operation.
• Make sure the correct voltage is being supplied before turning the power ON.
• Do not install with the power turned ON. Doing so may cause an electric shock.
• Do not install in a very humid environment. Doing so may cause an electric shock.
• Do not install in an area exposed to sun light or heat. Doing so may cause deformation or
damage.
• Do not remove the product cover. Doing so may expose you to a hazard like electric shock.
• Do not use in areas containing inflammable materials like propane gas and gasoline or in areas
that generate dust. Doing so may cause an explosion or fire.
• Do not dismantle, repair or modify the product. Doing so may cause damage or an electric
shock. Refer all servicing to qualified personnel.
• Do not use water, thinner or organic solvent for cleaning the product exterior. Doing so may
cause damage or an electric shock. Use a dry cloth instead and turn OFF the power before cleaning.
GANZ MPEG-4 Encoder Series Hardware Manual
2010/2-1 O 4
1. Introduction
ZN-S100AE, ZN-S1000AE, ZN-S2000AE and ZN-S4000AE compress video/audio data and transmit the compressed video/audio data through the network in real time. GANZ encoder provides a high quality video image with a limited bandwidth and storage capacity. These products are ideally suited for a wide range of surveillance and remote monitoring applications. Main features are highlighted below.
Main features
• High Quality Compression in real time streaming
• GANZ encoder provides high quality MPEG-4 and MJPEG encoding at D1 in real time.
Network
• RTP/RTSP and unicast/multicast are supported.
Streaming
• ZN-S2000AE and ZN-S4000AE support dual streaming mode such as different
codec/resolution/bit rate and so on.
• GANZ encoder supports de-interlacing by hardware.
Video/Audio
• Loop out is supported (ZN-S4000AE requires a T-BNC connector).
• ZN-S4000AE supports quad view in external monitor.
• GANZ encoder supports two ways audio (ZN-S100AE supports only audio input)
Transmits to client - G.711 by software Receives from client - one digital audio
Additional Features
• RS-485 serial port for Pan/Tilt/Zoom. (Except ZN-S100AE)
• RS-232C serial port for some devices like a POS terminal. (Except ZN-S100AE)
• Motion detection by hardware.
• On Screen Display (OSD) by hardware.
SDK
• Three types (RTSP, UDA5,and HTTP-API) are provided for application development.
GANZ MPEG-4 Encoder Series Hardware Manual
2010/2-1 O 5
2. Product Description
2.1. Specifications
GANZ encoder series specification is shown as following Table 1.
ZN-S100AE ZN-S1000AE ZN-S2000AE ZN-S4000AE
2ch MPEG-4
50/60fps@D1
4ch MPEG-4
100/120fps@D1
1ch MPEG-4
25/30fps@D1
1ch MPEG-4
25/30fps@D1
Single
Mode
Dual
Mode
Single
Mode
Dual
Mode
Input channel 1ch 1ch 2ch 1ch 4ch 2ch
Output Channel - 1 Loop Out - 1 Loop
Out
1 Quad 2 Loop
Out
Compression MPEG-4, MJPEG Selectable per Channel
Resolution D1, 2CIF, CIF, QCIF
Video
Compression FPS 25/30fps@D1 25/30fps@D1 50/60fps@D1 100/120fps@D1
Input/Output
Channel
1/- ch 1/1ch 2/1ch 1/1ch 4/1ch 2/1ch
Audio(O
ptional)
Data Format PCM(software compression : G.711, uLaw)
Network 10/100 Base-T
DI/DO 2/2 2/2 4/4
RS-232C - Supported
RS-485 - Supported
Power over Ethernet Optional
De-interlacing Supported by hardware
Motion Detection Supported by hardware
OSD Supported by hardware
Video Stream Encryption AES
Protocols SNTP, DHCP, UDP, TCP, RTP, RTSP(unicast/ multicast)
Table 1. Specification for ZN-S1000AE, 2000 and 4000
GANZ MPEG-4 Encoder Series Hardware Manual
2010/2-1 O 6
2.2. Functions
2.2.1. Front Panel
Figure 1. Front Panel of ZN-S4000AE
①, ② Indicator LED (Status, Network)
Status (Orange) and Network (Green) indicators display the following system information:
Status (Orange) Network (Green)
Power OFF OFF OFF
Booting in progress ON OFF
Successful network connection ON Blinking
Failed network connection ON OFF
Data transmission in progress Blinking(Slow) Blinking (Fast)
Table 2. Status of the GANZ encoder series indicator LED
1. System initialization and booting
When power is supplied to ZN-S4000AE, it is initialized for approximately 1 second. During this time, the orange Status LED is turned on. After completion of booting, for a successful network connection, the green Network LED blinks indicating that data is being transmitted. If network connection fails, please check the LAN cable is connected or restart GANZ encoder.
2. Video streaming service
When an application runs, the Status LED blinks each second. The Network LED blinks at a rate proportional to the amount of data being transmitted.
③, ④, ⑧ Video Input BNC Connector (Vin 1, Vin 2, Vin 3 and Vin 4)
It is mainly used for video inputs, however it can be used for video loop-out some case as following Table 3.
GANZ MPEG-4 Encoder Series Hardware Manual
2010/2-1 O 7
Single Stream Dual Stream Model
Video Input Video Loop-out Video Input Video Loop-out
ZN-S100AE Vin1 - - -
ZN-S1000AE Vin1 Video Loop-out - -
ZN-S2000AE Vin1, Vin2 T-BNC Connector Vin1 Vin2
ZN-S4000AE Vin1, Vin2,
Vin4
T-BNC Connector Vin1, Vin3 Vin2, Vin4
Table 3. Video Connector Usage
Termination Resistor DIP Switch may be applied, when Video Input BNC Connector is used for video loop-out. T-BNC connector is not included in GANZ encoder package.
⑤ Termination Resistor DIP Switch (75Ω ON)
A switch to turn ON/OFF a 75 termination resistor is provided for each video input. Factory default setting is ON. If impedance is mismatched between video inputs and outputs that are connected together, you need to turn this DIP switch on/off to match the impedance to 75.
⑥ Video Output BNC Connector (Vout - Only ZN-S4000AE)
Vout is used for ZN-S4000AE to display quad, switching view in external monitor.
⑦ Reset Switch (Reset)
Reset switch is used for restarting GANZ encoder or resetting GANZ encoder as Factory Default (FD). Refer to ‘4.1. Factory Default Settings’ for detailed procedures.
Loading...
+ 14 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use