Ganz ZN-PTZ202XE Installation

INFORMATION TO USER

CAUTION

RISK OF ELECTRIC SHOCK,

DO NOT OPEN

!

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

CONTACT QUALIFIED SERVICE PERSONNEL FOR INTERNAL PARTS.

This symbol is intended to alert the user the presence of un-insulated
“dangerous voltage” within the product’s enclosure, which may be sufficient
magnitude to constitute a electric shock risk to persons.

!

This symbol is intended to alert the user the presence of important operating
and maintenance (servicing) instructions within the guide manual.

ZN-PTZ202XE Installation Guide

01A.00 2

Table of Contents

ZN-PTZ202XE Installation Guide

1. FEATURES ................................................................................................................. 4

2. PACKAGE CONTENTS ................................................................................................ 5

3. PART NAMES ............................................................................................................ 6

4. INSTALLATION .......................................................................................................... 7

4.1. Setting the Lens Position ................................................................................................ 8

4.3. Setting the Image Attribute ............................................................................................ 8

5. CONNECTIONS .......................................................................................................... 9

6. CONFIGURATION .................................................................................................... 11

6.1.Set up network environment ......................................................................................... 11

6.1.1. Generic IP Environment ......................................................................................... 11

6.1.2. Custom IP Environment ......................................................................................... 12

6.2. View video on web page ............................................................................................... 13

6.2.1. View video using IPAdmin Tool ... エラー! ブックマークが定義されていません。

6.3. Reset ............................................................................................................................ 15

6.4. Factory Default ............................................................................................................. 15

APPENDIX (A): SPECIFICATIONS.................................................................................. 16

Summary ............................................................................................................................ 16

Electrical Characteristics ..................................................................................................... 17

Environment Condition ....................................................................................................... 17

Mechanical Condition ......................................................................................................... 17

APPENDIX (B): POWER OVER ETHERNET .................................................................... 18

PoE compatibility ................................................................................................................ 18

Power Comparison .............................................................................................................. 18

APPENDIX (C): DIMENSIONS ....................................................................................... 19

APPENDIX (D): HEXADECIMAL-DECIMAL CONVERSION TABLE ................................... 20

REVISION HISTORY ..................................................................................................... 21

01A.00 3

1. FEATURES

ZN-PTZ202XE Installation Guide

Camera

 Full HD indoor high-speed dome IP camera
 High quality compression in real time streaming
 1/3” High Quality CMOS Image Sensor
 Optical 20X, Digital 8X zoom
 True Day / Night (ICR)
 Stealth Spin® (World’s most silent speed dome)

 360° Pan Rotation

Streaming

 Dual streaming mode
 De-interlacing on DSP
 Burnt-in text supported
 Unicast/Multicast supported

Video/Audio

 Video compression: H.264/MJPEG, 25/30FPS@1080p
 Audio compression: G.711(µLaw, aLaw)/PCM
 Analog video out for external monitors
 Video motion detection supported
 Mic in and line out audio supported

Network

 RTSP/ HTTP protocol supported
 10/100 Base-T Ethernet

Additional Features

 Micro SD/SDHC card support
 PoE+ support
 Built-in Video Content Analysis
 Internal fan
 SDK (Software Development Kit) provided
 255 Dome positions

01A.00 4

2. PACKAGE CONTENTS

Camera

Video connector

Quick installation guide

Note

i

The above contents are subject to change without prior notice.

ZN-PTZ202XE Installation Guide

Unpack carefully and handle the equipment with care. The packaging contains:

01A.00 5

3. PART NAMES

① 3-Pin terminal block connector

For power connection (AC, FG, AC)

② Video Out

CVBS : 1.0 Vp-p / 75Ω composite3.5

③ Audio microphone stereo jack connector

Connector for 3.5mm audio jack plug.

④ Audio speaker stereo jack connector

Connector for 3.5mm audio jack plug.

⑤ 8-Pin terminal block (485 + Digital In)

Interface connector (JN4, JN3, GND, JN2, JN1, GND, 485+, and 485-)

⑥ 6-Pin terminal block (Digital Out)

Interface connector (2N.O, COM2, 2N.C, 1N.O, COM1, 1N.C)

⑦ LAN connector

RJ45 LAN connector for 10/100 Base-T Ethernet.

⑧ 32-pin slot

Main socket for 32-pin connector on pcb.

⑨ Built-in microSD slot

Supports up to 32GB. (SDHC)
Recommend Class 4 and higher for HD recordings

②

③

⑤

④

①

PCB View

⑦

⑥

Main Camera Top View

⑧

⑨

* Models and their appearance are subject to change without any prior notice.

ZN-PTZ202XE Installation Guide

01A.00 6

4. INSTALLATION

1) Secure three screws inside a PCB

board shield’s three unit holders with
metal rings attached in the end.

2) Connect all necessary cables to a PCB
board before attaching the shield to an
installation surface.

3) Under the PCB board shield has a 32-

pin connector which matches the main
camera body’s 32-pin socket; The
shield’s three unit holders also align
with the main camera body’s three unit
holder holes.

4) Once cable connect is complete

along with brackets and poles on an
installation spot, hook the roll-up
string that is attached to a board
shield to the main body. Main body
has a secured string holder hole.

5) Align the connector and socket, and
then push the main body to conjoin.

6) Once two units are attached, rotate
the main camera body counterclockwise
to secure the lock.

Caution

!

To prevent products from damaging, place the camera on stable and non-vibrat
ing surfaces. If the stability is in doubt, consult with safety personnel for reinfor
cements, and then proceed with the installation.

Roll-up
String hole

32-pin socket

ZN-PTZ202XE Installation Guide

01A.00 7