Ganz zn-m2af User Manual
PixelPro Series ZN-M2AF User’s Manual
10-2014-A
0
PixelPro Series ZN-M2AF User’s Manual
10-2014-A
1
SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with a dry cloth.
7) Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
that produce heat.
9) Only use the attachments/accessories specified by the manufacturer.
10) Use only with a cart, stand, tripod or bracket specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
12) Unplug this apparatus during lightning storms or when unused for long periods of time.
13) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objec
ts have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not oper
ate normally, or has been dropped.
WARNING:
・To reduce the risk of fire or electric shock, do not expose this apparatus to rain or
moisture.
・The apparatus shall not be exposed to dripping or splashing and that no objects filled
with liquids, such as vases, shall be placed on the apparatus.
PixelPro Series ZN-M2AF User’s Manual
10-2014-A
2
Caution:
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
These servicing instructions are for use by qualified service personnel only. To reduce the risk of
electric shock does not perform any servicing other than that contained in the operating instructions
unless you are qualified to do so.
In USA and Canada, Use Class 2 Power Supply Only
PixelPro Series ZN-M2AF User’s Manual
10-2014-A
3
Contents
1. PRODUCT FEATURES ............................................................................................................................ 5
2. INSTALLATION ......................................................................................................................................... 6
2.1 INSTALL CAMERA .......................................................................................................................................... 6
3. ACCESSING THE CAMERA ................................................................................................................... 7
3.1 ACCESS FROM A BROWSER .......................................................................................................................... 7
3.2 ACCESSING THE CAMERA FROM THE INTERNET ........................................................................................... 8
3.3 ADJUSTING THE IMAGE ANGLE ..................................................................................................................... 8
3.4 THE LIVE VIEW PAGE .................................................................................................................................... 9
3.5 VIDEO STREAM TYPES ................................................................................................................................ 10
3.6 HOW TO STREAM H.264............................................................................................................................. 10
4. THE SETUP ............................................................................................................................................. 11
5. ANALOG OUTPUT ................................................................................................................................ 12
5.1 ANALOG OUTPUT SETUP ........................................................................................................................... 12
6. VIDEO ...................................................................................................................................................... 12
6.1 CODEC ........................................................................................................................................................ 12
6.2 CAMERA ..................................................................................................................................................... 15
6.2.1 Exposure Control ............................................................................................................................. 15
6.2.2 Day & Night Control ......................................................................................................................... 16
6.2.3 White Balance Control ..................................................................................................................... 17
6.2.4 Image Property Control ................................................................................................................... 17
7. LIVE .......................................................................................................................................................... 18
7.1 SETUP ...................................................................................................................................................... 18
7.2 PRIVACY MASKING .................................................................................................................................. 19
8. FTP ........................................................................................................................................................... 20
8.1 FTP > CONFIG ........................................................................................................................................... 20
8.2 FTP > EVENT ............................................................................................................................................. 20
8.3 FTP > PERIODICAL .................................................................................................................................... 21
9. EVENT ..................................................................................................................................................... 22
9.1 EVENT > MOTION ....................................................................................................................................... 22
9.2 EVENT > TAMPER DETECTION ................................................................................................................... 23
9.3 EVENT > MAPPING ..................................................................................................................................... 23
10. NETWORK ............................................................................................................................................ 24
10.1 NETWORK > IP SETUP ............................................................................................................................. 24
10.2 NETWORK > SERVICE PORT .................................................................................................................... 26
10.3 NETWORK > RTP ..................................................................................................................................... 26
10.4 NETWORK > E-MAIL ................................................................................................................................. 27
10.5 NETWORK > DDNS ................................................................................................................................. 28
10.6 NETWORK > UPNP .................................................................................................................................. 29
11. SYSTEM ................................................................................................................................................. 30
11.1 SYSTEM > USER ....................................................................................................................................... 30
11.2 SYSTEM > DATE & TIME ........................................................................................................................... 31
11.3 SYSTEM > MAINTENANCE ........................................................................................................................ 32
11.4 SYSTEM > INFORMATION .......................................................................................................................... 34
PixelPro Series ZN-M2AF User’s Manual
10-2014-A
4
12. DIMENSIONS ....................................................................................................................................... 35
13. SPECIFICATIONS ................................................................................................................................ 36
PixelPro Series ZN-M2AF User’s Manual
10-2014-A
5
1. Product Features
The GANZ PixelPro Series (ZN-M2AF) is a high performance H.264 network camera,
designed for demanding security installations. It delivers crisp, clear images, disclosing
every detail, thanks to its top quality Megapixel progressive CMOS sensor and
advanced image processing.
Supported by the industry’s largest base of video management software, the GANZ
PixelPro provides the perfect solution for securing bank offices, airports and other
facilities, and for traffic surveillance, over IP based networks.
The optimal Power over Ethernet (IEEE 802.3af) support power to the camera to be
delivered via the network, eliminating the need for a power outlet and reducing
installation costs. Steady power could be guaranteed with a central Uninterruptible
Power Supply (UPS).
The GANZ PixelPro offers a comprehensive set of network security and management
features. This includes support for port based network control (IEEE802.1X), which
allows the camera to be connected to a network secured with this control, and HTTPS
encryption, which provides a secure channel between camera and application. It also
enables authentication of the video source. Video products are efficiently managed with
the powerful GANZ PixelPro Camera Management tool, which is provided on the
Installation CD which comes with each GANZ PixelPro camera.
PixelPro Series ZN-M2AF User’s Manual
10-2014-A
6
1. Network (RJ-45 PoE required)
The ZN-M2AF connects to the network via a standard network cable, and
automatically detects the speed of the local network segment (10BaseT/100BaseTX
Ethernet). This socket must be used to power the ZN-M2AF via Power over
Ethernet (PoE). The camera auto-senses the correct power level when using a PoE
switch, router or injector.
2. Video output for service monitor
This analog video output is available when installation mode is set to ON. Use
accessory cable to video output.
3. Reset Switch
This switch has 3 functions by pressing time.
1) Switch NTSC / PAL format (less than 1second)
2) System reboot (around 5 seconds)
3) Factory Default Reset (More than 10 seconds)
2. Installation
2.1 Install camera
1) Assemble the tripod for fixing
with wall bracket on Camera with
supplied screws.
2) Fix the wall bracket on place that
user want to install.
3) Connect the Wall bracket and Camera
PixelPro Series ZN-M2AF User’s Manual
10-2014-A
7
3. Accessing the Camera
Follow the instructions in the GANZ PixelPro Installation Guide to install the camera.
The GANZ PixelPro could be accessed with most standard operating systems and
browsers. The recommended browser is Internet Explorer for Windows with other
operating systems.
3.1 Access from a browser
1. Start a browser (Internet Explorer)
2. Enter the IP address or host name of the camera in the Location/Address field of
your browser. Press Enter.
3. Login dialog will appear when the camera is accessed for the first time.
4. The default user name is ADMIN, and password is 1234.
5. The camera’s Live View page is now displayed in your browser.
Note: The layout of the live view page in the camera may have been customized to
meet specific requirements. Consequently, some of the examples and functions
featured here may differ from those displayed on your own Live View page.
PixelPro Series ZN-M2AF User’s Manual
10-2014-A
8
3.2 Accessing the camera from the Internet
Once installed, the camera is accessible on the local network (LAN). Configure the
router/firewall to allow incoming data traffic to access the camera from the Internet. For
security reasons this is usually done on a specific port. Please refer to the
documentation for router/firewall for further instructions.
3.3 Adjusting the Image angle
To adjust the image angle.
1. Open the Live View page in your web browser.
- Select the Setup tab, and open the Analog output page.
- Select the ‘Video Format' or “ON”.
2. Connect supplied video monitor cable to video output connector, then connect it to
analog monitor with coaxial cable.
- Adjust lens position.
Or otherwise check the image from the Live View page on your web browser.
- Adjust lens position.
With Web Browser
1. Open the Live View page in your web browser.
-Click ‘Lens Adjustment’ on the Live View or Select the Setup tab, and open the
Video -> Camera page.
2. Set the desired Zoom position.
3. Click ‘One Push Focus’ button for adjust focus automatically or set focus manually.
PixelPro Series ZN-M2AF User’s Manual
10-2014-A
9
3.4 The Live View page
Digital Zoom
Snap Shot
Full Screen
Video Stream change: First stream Second stream
Play: Click this button by manually to start the stream
Stop: Click this button by manually to stop streaming
NOTE: It is possible that not all the buttons described below will be visible unless the
Live View page has been customized to display them.
PixelPro Series ZN-M2AF User’s Manual
10-2014-A
10
3.5 Video stream types
H.264 protocols and communication methods
• RTP (Real-time Transport Protocol) is a protocol that allows programs to manage the
real-time transmission of multimedia data, via unicast or multicast.
• RTSP (Real Time Streaming Protocol) serves as a control protocol, to negotiate the
type of transport protocol to use for the stream. RTSP is used by a viewing client to
start a unicast session.
• UDP (User Datagram Protocol) is a communications protocol that offers limited
service for exchanging data in a network which uses the Internet Protocol (IP).
UDP is an alternative to the Transmission Control Protocol (TCP). The advantage of
UDP is that, it is not required to deliver all data and may drop network packets when
there is network congestion. This is suitable for live video, as there is no point in retransmitting old information that will not be displayed anyway.
• Unicasting is communication between a single sender and a single receiver over a
network. This means that the video stream goes independently to each user, and each
user gets own stream. A benefit of unicasting is, in case one stream fails, it only affects
one user.
• Multicasting (Will be supported) is bandwidth-conserving technology that reduces
bandwidth usage by simultaneously delivering a single stream of information to multiple
network recipients. This technology is used primarily on delimited networks (intranets),
as each user needs an uninterrupted data flow and should not rely on network routers.
3.6 How to stream H.264
Deciding on the combination of protocols and methods to use depends on your viewing
requirements, and on the properties of your network. Setting the preferred method(s) is
done in webpage.
RTP+RTSP
This method (actually RTP over UDP and RTSP over TCP) should be your first
consideration for live video, especially when it is important to always have an up-to-date
video stream, even if some images are lost due to network problems. This could be
configured as multicast or unicast.
RTP/RTSP/Multicasting (Will be supported) provides the most efficient usage of
bandwidth, especially when there are large numbers of clients viewing simultaneously.
Note however, that a multicast broadcast could not pass a network router unless the
router is configured to allow this. For example, it is impossible to multicast over the
Internet.
PixelPro Series ZN-M2AF User’s Manual
10-2014-A
11
RTP/RTSP/Unicasting should be used for video-on-demand broadcasting, so that
there is no video traffic on the network until a client connects and requests the stream.
However, as more and more unicast clients get connected, the traffic on the network
will increase and may cause congestion. Although there is a maximum of 10 unicast
viewers, note that all multicast users combined count as 1 unicast viewer.
RTP/RTSP
This unicast method is RTP tunneled over RTSP. This could be used to exploit the fact
that it is relatively simple to configure firewalls to allow RTSP traffic.
4. The Setup
The GANZ PixelPro is configured from the Setup link, which is available on the top left
hand side in the web interface. This configuration could be done by:
• Administrators, who have unrestricted access to all settings under the Setup tab.
Accessing the Setup link from a browser
1. Start your web browser and enter the IP address or host name of the camera into the
address bar.
2. The Live View page is now displayed. Click on the Setup tap.
PixelPro Series ZN-M2AF User’s Manual
10-2014-A
12
5. Analog output
Toggle menu changed to “ON/OFF” from FW1558 and later.
5.1 Analog Output Setup
Toggle the Analog video output to “ON/OFF” from BNC output of the camera.
Analog output allows selection of Video output format from BNC output of the camera.
NTSC, PAL: Analog Output is selectable.
This Analog Video Format menu moved to “Codec” page from FW1558 and later.
6. Video
The following descriptions show examples of some of the features available in the
GANZ PixelPro.
6.1 Codec
These are the tools for adjusting the H.264 settings and controlling the video bit rate.
Loading...