Ganz PIXELPRO SERIES, ZN-DNT372XE-MPD Installation Manual

(-1)

PixelPro GXi Series ZN-DNT372XE-MPD(-1) Installation Guide

Precaution

 Please read this manual carefully before installing the unit.

 Never disassemble the camera. Unauthorized disassembly may cause equipment failure

or damage to the unit.

 Please do not install the camera in a place exposed to direct sunlight.

 Do not operate the camera in environments beyond the specified temperature.

Refer to “Environment Condition” on “APPENDIX (A) : SPECIFICATIONS” in this manual.

 Before applying power to the camera, check the power source to ensure that it is

within the specifications. Refer to “Electrical Characteristics” on “APPENDIX (A) :
SPECIFICATIONS”

03-2014-A 2

PixelPro GXi Series ZN-DNT372XE-MPD(-1) Installation Guide

Table of Contents

Precaution ................................................................................................................ 2

1. FEATURES ............................................................................................................. 4

2. PACKAGE CONTENTS............................................................................................. 5

3. PART NAMES ........................................................................................................ 6

4. INSTALLATION ...................................................................................................... 8

4.1. Installing the camera .......................................................................................................... 8

4.1. Adjusting the angle of the camera / zoom and focus ...................................................... 10

4.3. Setting the Image Attribute ............................................................................................. 11

5. CONNECTIONS .................................................................................................... 12

6. CONFIGURATION ................................................................................................ 15

6.1.Set up network environment ............................................................................................ 15

6.1.1. Generic IP Environment ............................................................................................ 15

6.1.2. Custom IP Environment............................................................................................. 16

6.2. View video on web page .................................................................................................. 17

6.2.1. ActiveX Installation .................................................................................................... 17

6.2.2. View video using IPAdmin Tool ................................................................................. 18

6.3. Reset ................................................................................................................................. 19

6.4. Factory Default ................................................................................................................. 19

6.5. Safe Mode ........................................................................................................................ 20

APPENDIX (A): SPECIFICATIONS .............................................................................. 22

Summary ................................................................................................................................. 22

Electrical Characteristics ......................................................................................................... 23

Environment Condition ........................................................................................................... 23

Mechanical Condition ............................................................................................................. 23

APPENDIX (B): POWER OVER ETHERNET ................................................................. 24

PoE compatibility .................................................................................................................... 24

Power Comparison .................................................................................................................. 24

APPENDIX (C): DIMENSIONS ................................................................................... 25

APPENDIX (D): HEXADECIMAL-DECIMAL CONVERSION TABLE ................................. 26

REVISION HISTORY ................................................................................................. 27

03-2014-A 3

PixelPro GXi Series ZN-DNT372XE-MPD(-1) Installation Guide

1. FEATURES

Camera

 1/2.7” 1080p CMOS Image Sensor
 True Day/Night
 DC Auto Iris Lens
 WDR
 Remote Zoom/Focus Control (One Click Focus)
 Remote Pan/Tilt Control (Repositionable dome camera)
 Weather Proof (IP66)
 Vandal Proof (IK10)

Video

 H.264 Baseline, Main, High profile (MPEG-4 Part 10/ AVC), MJPEG(Motion JPEG)
 Max 30 fps in 1080p
 Text Overlay
 Analog Video Output for 3 minutes (Only for installation purpose)

Audio

 Two-way Audio Streaming
 G.711 µLaw

Network

 10/100 Base-T Ethernet

Integration

 Software Development Kit (SDK) available
 ONVIF Compliant (Profile S)

General

 microSD slot
 Power Over Ethernet (PoE)

Video Contents Analytics (VCA)

 VCA Presence (Standard)
 VCA Surveillance (Optional)

03-2014-A 4

PixelPro GXi Series ZN-DNT372XE-MPD(-1) Installation Guide

Camera

DC Power Adaptor

DC Power Jack Cable

Terminal Blocks

Video Output Cable

Screws and anchor blocks

Side Plug

Hex Wrench Driver

Side Cover

RJ45 Coupler

Ferrite Core

Quick Installation Guide

Installation Template

Note

i

The contents above are subject to change without prior notice.

2. PACKAGE CONTENTS

Please unpack the package carefully and handle the equipment with care.
The packaging contains:

03-2014-A 5

PixelPro GXi Series ZN-DNT372XE-MPD(-1) Installation Guide

ETHERNET

② ③ ⑤

* Models and their appearance are subject to change without any prior notice.

④ ⑧ ①

Top View

⑦ ⑥ ⑨

⑪

⑩

Ferrite Core

3. PART NAMES

① Reset button

Use the button to restart the device or to reset it to Factory Default. Refer to “6.3. Reset” and
“6.4. Factory Default” for more details.

② Focus buttons

Use the buttons to automatically correct focus [One Push Focus].

③ Zoom In/Out buttons

Use the buttons for camera to cover the wide field of view or to concentrate on narrow field of view.

④ PAL/NTSC button

Pressing the button cycles through PAL, NTSC, and no video output mode: No video output -> PAL->NTSC

⑤ Video output connector

Connector for video output. (CVBS : 1.0 Vp-p / 75Ω BNC)
Once the PAL/NTSC button is pressed, the video displays for 3 minutes before returns back to ‘no video
output’ status.

⑥ microSD slot

Supports up to 64GB. Recommend Class 4 and higher for HD recordings.

⑦ Tilt buttons

Use the buttons to control rotation of the lens in vertical.

03-2014-A 6

PixelPro GXi Series ZN-DNT372XE-MPD(-1) Installation Guide

Note

i

It is recommended to install the ferrite core, which is included in the package, to
the cable like the image on page 6.
< How to install the ferrite core >

1. Open the ferrite core by lifting the clip.

2. Place the cable inside the ferrite core.

3. Close the ferrite core to hold the cable in place.

⑧ Pan buttons

Use the buttons to control rotation of the lens in horizontal.

⑨ Terminal connector

Connector for cable connection of audio input/output and digital input/output.
Refer to “5. Connections” for more details.

⑩ LAN connector

RJ45 LAN connector for 10/100 Base-T Ethernet (PoE supported)

⑪ Power Adaptor connector

Use 12VDC or 24VAC adaptor for power supply.

03-2014-A 7

PixelPro GXi Series ZN-DNT372XE-MPD(-1) Installation Guide

Caution

!

Sealing gaps is recommended as gaps may appear after the camera installation.
Gaps may cause problems such as moisture, water leakage, and etc., which
negatively affect the operation of the camera if gaps appear but remain
unsealed.

Caution

!

To prevent products from damage, place the camera on stable and non-vibrating
surfaces. If the stability is in doubt, consult safety personnel for reinforcements,
and then proceed with the installation.

1) Place the installation template (outline
shown on the next page) included in the
package on the desired installation surface.

2) Drill holes in correct positions based on the
template paper, and insert anchor blocks into
the holes.

3) Make sure the necessary cables including a
LAN cable and a power cable are properly
connected to the camera either thru the
ceiling or thru the groove around the
mounting plate.

4) Place the camera body and match three
alignment holes with the corresponding
anchor blocks and hold against the mounting
surface.

5) Tighten the anchor blocks with screws.

6) Adjust the angle/zoom/focus of the camera

Refer to “4.2. Adjusting the angle of the
camera/zoom and focus” for more details.

7) Place the dome cover on the main body of

the camera. Dome cover has three alignment
holes that match camera body’s alignment
holes.

8) Once properly placed, insert screws into the
three holes of the body and tighten them up.

4. INSTALLATION

4.1. Installing the camera

03-2014-A 8

PixelPro GXi Series ZN-DNT372XE-MPD(-1) Installation Guide

Caution

!

Installation template’s image size scale in this installation guide is not 1:1.
The correct-size template design paper can be found inside the package separ
ately.

Installation Template

03-2014-A 9

(Unit: mm)