Ganz ZM-TY110A, ZM-TY121A, ZM-TY114A, ZM-TY115HA, ZM-TY15HA Instruction Manual

EG-2

1. Read Instructions : All the safety and operating instructions should be read before the appliance is
operated.

2. Retain Instructions : The safety and operating instructions should be retained for future reference.

3. Heed Warnings : All warnings on the monitor and in the operating instructions should be adhered to.

4. Follow Instructions : All operating and use instructions should be followed.

5. Cleaning : Unplug this monitor from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

CONTENTS

IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EG-2

GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EG-4

FRONT PANEL COMPONENTS AND CONTROLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EG-5

REAR PANEL COMPONENTS AND CONTROLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EG-6

CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EG-6

MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EG-7

SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EG-7

IMPORTANT SAFEGUARDS

Graphic Symbol Explanation

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert
the user to the presence of uninsulated ‘dangerous voltage’ within the product’s enclosure
that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in
the literature accompanying the appliance.

CAUTION

CAUTION : TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Warning-To Prevent Fire or Shock Hazard, Do Not Expose This Monitor To Rain or
Moisture.

Caution

Power source is indicated on the rear of the set. It contains high-voltage parts. If you remove
the cover, it may cause fire or electric shock. Do not remove the cover by yourself. (Control
switches are at the front of the monitor).

EG-3

Exception. A monitor that is meant for uninterrupted service and that for some specific reason, such as
the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged
by the user for cleaning or any other purpose, may exclude the reference to unplugging the monitor in
the cleaning description otherwise required in Item 5.

6. Attachments : Do not use attachments not recommended by CBC as they may cause hazards.

7. Water and Moisture : Do not use this monitor near moisted environment a bathtub, wash bowl, kitchen

sink, or laundry tub, in a wet basement, or near a swimming pool and the like.

8. Accessories : Do not place this monitor on an unstable cart, stand, tripod, bracket, or table. The
monitor may fall, causing serious injury to a child or adult, and serious damage to the appliance. Use
only with a cart, stand, tripod, bracket, or table recommended by CBC, or sold with the monitor. Any
mounting of the monitor should follow CBC’s instructions, and should use a mounting accessory
recommended by CBC.

9. V entilation : Slots and openings in the cabinet are provided for ventilation and to ensure reliable
operation of the monitor and to protect it from overheating, and these openings should never be blocked
by placing the monitor on a bed, sofa, rug, or other similar surface. This monitor should never be placed
near or over a radiator or heat register.
This monitor should not be placed in a built-in installation such as a bookcase or rack unless proper
ventilation is provided or CBC’s instructions have been adhered to.

10. Power Sources : This monitor should be operated only from the type of power source indicated on the
making label. If you are not sure of the type of power supply to your installation site, consult your CBC
dealer or local power company.

11. Grounding or Polarization : For monitors equipped with a 3-wire grounding-type plug having a
third(grounding)pin. This plug will only fit into a grounding type power outlet. This is a safety feature. If
you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the grounding-type plug.

12. Power : Cord Protection-Power supply cords should be routed so that they are not likely to be walked
on or pinched by items placed upon or against them, paying particular attention to cords at plugs,
convenience receptacles, and the point where they exit from the monitor.

13. Lightning : For added protection for this monitor during a lightning storm, or when it is left unattened
and unused for long periods of time, unplug it from the wall outlet and disconnect the cable system. This
will prevent damage to the monitor due to lightning and power-line surges.

14. Overloading : Do not overload wall outlets and extension cords as this can result in a risk of fire of
electric shock.

15. Object and Liquid Entry : Never push objects of any kind into this monitor through openings as they
may touch dangerous voltage points or short-out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the monitor.

16. Servicing : Do not attempt to service this monitor yourself as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

17. Damage Requiring Service : Unplug this monitor from the wall outlet and refer servicing to qualified
service personnel under the following conditions.

a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the monitor.
c. If the monitor has been exposed to rain or water.
d. If the monitor does not operate normally by following the operating instructions. Adjust only those

controls that are covered by the operating instructions as an improper adjustment of other controls
may result in damage and will often require extensive work by a qualified technician to restore the

monitor to its normal operation.
e. If the monitor has been dropped or the cabinet has been damaged.
f. When the monitor exhibits a distinct change in performance-this indicates a need for service.

18. Replacement Parts : When replacement parts are required, be sure the service technician has used
replacement parts specified by CBC or have the same characteristics as the original parts.
Unauthorized substitutions may result in fire, electric shock or other hazards.

19. Safety Check : Upon completion of any service or repairs to this monitor, ask the service technician to
preform safety checks to determine that the monitor is in proper operating condition.