Ganz ZM-L406P-II Instruction Manual

Edition: V1.0

1

About this user manual

The user manual was provided to let the user to understand the equipment

quickly and use it correctly, and also can proceed for simply repaired

procedures.

Federal Communications Commission (FCC)

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or more of

the following measures:

¾ Reorient or relocate the receiving antenna.
¾ Increase the separation between the equipment and the receiver.
¾ Connect the equipment onto an outlet on a circuit different from that to

which the receiver is connected.

¾ Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference

that may cause undesired operation.

2

Safety Information

¾ 5.6”TFT LCD Monitor is operated by battery when not connected to any

other power source. If the battery is removed incorrectly, it may cause

damage to human. So please do not remove the battery or let the battery

get touch with water or bask under the sun directly.

¾ Please read and check this user manual carefully.
¾ Please use the accessories, especially the power adapter, specified by

the manufacturer. It may cause damage if use the un-approval

accessories.

¾ Before turn on the equipment, make sure all accessories were installed

correctly.

¾ Do not use it near water.
¾ Do not install near any heat source or bask under the sun directly.
¾ Put it on a stable desk to avoid user injured or system damaged.
¾ Protect the power cord to avoid anything put on it. Do not put power cord

from being walked.

¾ Do not let the power socket over loading to avoid sparking or electric

shock.

¾ Do not repair it by yourself. Open cabinet may cause user in danger.
¾ Please pull out the power cord immediately under below situations:：

 Power cord damaged
 Liquid spray on the machine.
 The machine dropped on the ground or cabinet damaged。

¾ Please package it well to be repaired when it was breakdown.

¾ Warranty:

The warranty will be terminated if the TFT LCD monitor was opened.

When the user has problem using this equipment, please contact the seller

and request for technical support. If the damage is caused of incorrect

operation or does not follow the user manual, the manufacture will not

guarantee its responsibility.