How it Works
Ganz
Loading...
ZC-NX270P
Instruction Manual
12 pgs1.81 Mb0

Ganz ZC-YX270P, ZC-YXW270P, ZC-NX270P, ZC-YX270PE, ZC-NX270PE Instruction Manual

...
EG-2
Thank you for your purchase of this product.
Before operating this product, please read this instruction manual carefully.
After you have read this manual, store it in a safe place for future reference.
CONTENTS
PRODUCT FEATURES
• High-resolution surveillance camera with a new built-in 1/3-type CCD. It delivers clear images at a horizontal resolution of 700 TVL by using a new high-resolution CCD and image processing technology.
• 12 V DC/24 V AC auto switching power supply. (ZC-YX270P, ZC-NX270P, ZC-YXW270P, ZC-NXW270P)
• The new Wide Dynamic Range (WDR) processing technology offers the high dynamic range of approximately 82dB, ensuring sharp images even if the pictures are shot in mixed indoor/outdoor scenes with backlight.
• New Easy Focus function helps adjust the lens focus by edge enhancement focus level bar, and screen view zoom-up / down.
• The Color Bar Output function enables the checking and adjustment of cable signal levels and monitoring of the image quality.
• The Defog function provides high-quality images with automatically enhanced contrast in an environment with poor visibility, such as fog, mist, rain, and snow.
• The 3D-Digital Noise Reduction (3D-DNR) function realizes low noise and high sensitivity.
• The OSD settings can be dynamically switched using the Profile Switching function. With these functions, two preset profiles can be switched with each other when a Mode Selection terminal has been controlled or Day/Night switching has been made. A combination of profiles can be selected according to surveillance conditions.
• Day/Night function provides a high-sensitivity black and white image in low light conditions (e.g., night time) by automatically switching the camera to black and white mode. The camera is automatically switched to color mode in brighter light conditions (e.g., day time).
• This product offers additional functions such as Stabilizer, Privacy Mask, and Motion Detection functions.
• Long-distance transmission is possible using UTP (Unshielded Twisted Pair) cable. (Use a receiver produced by NVT) (ZC-YX270PU, ZC-YXW270PU)
EG-3
SAFETY PRECAUTIONS
The installation should be made by a qualified service person and should conform to all local codes. For this device provided no power switch, the installation shall be carried out in accordance with the rules of the country or the region in which the equipment is to be installed.
This symbol indicates that there is a possibility of death or damage to operator or others.
(1) Use only 24V AC power supply marked class 2 or +12V DC regulated power supply marked class 2.
(ZC-YX270P, ZC-NX270P, ZC-YXW270P, ZC-NXW270P)
(2) Use only with a 230 V AC power supply.
(ZC-YX270PE, ZC-NX270PE, ZC-YXW270PE, ZC-NXW270PE)
(3) Be sure to connect each lead to the appropriate terminal. Wrong connection may cause malfunction and/or
damage to the video camera. (4) Never attempt to disassemble or modify the camera. (5) If an abnormality should occur, immediately turn off the power and consult your dealer. (6) To prevent fire or electric shock, do not expose this product to rain or moisture. (7) Never remove the cover. This may cause fire or electric shock.
This symbol indicates that there is a possibility of injury or damage to equipment.
(1) Do not attempt to aim the camera at the sun or other extremely bright objects that cause smear to appear
irrespective of whether the camera is operating or not. This can damage the CCD (Charge Coupled
Device). (2) Do not place the camera in the following locations.
1 Locations subject to extremely high or low temperatures.
(Operating temperature range: -10°C to +50°C {14°F to 122°F})
(Storage temperature range: -20°C to +60°C {-4°F to 140°F})
2 Locations subject to high levels of humidity and dust.
(Operating humidity range: max 85% {No condensation})
(Storage humidity range: max 95% {No condensation})
3 Locations where there are large amounts of water vapor and steam.
(3) Ensure the location selected is sufficiently strong enough to support the weight of the camera and is free
from vibration. (4) When this camera is installed near equipment that emits a strong electromagnetic field, some irregularity
such as noise on the monitor screen may happen. (5) Do not allow the camera to be subjected to strong impacts or shocks. The camera could be damaged by
improper handling or storage. (6) When plugging the power cord into an electric outlet, be sure to leave enough space around the outlet so
that it will easy to unplug the power cord. (ZC-YX270PE, ZC-NX270PE, ZC-YXW270PE, ZC-NXW270PE)
The CE Marking is a Directive Conformity mark of the European Union (EU).
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product.
EG-4
PART NAMES AND FUNCTIONS
12 V DC/24 V AC / Model with communication function
LOCK
IRIS
UP
LEFT RIGHT
DOWN
MENU
GND
RS485
TERM
MODE-SEL B/W-FIX
VIDEO
ON OFF
A+ A- B+ B-
DC VIDEO
IRIS
RS485
MODE-SEL B/W-FIX
GND
A+ A- B+ B-
MODE-SEL B/W-FIX
GND
GND+12VDC
AC24V
1
2
3
4
56 7
8
9
bk
AC230V / Model with communication function
UP
LEFT RIGHT
DOWN
MENU
VIDEO
GND+12VDC
AC24V
DC VIDEO
IRIS
UTP BNC
UTP
+
-
RS485
TERM
MODE-SEL B/W-FIX
VIDEO
ON OFF
A+ A- B+ B-
DC VIDEO
IRIS
UP
LEFT RIGHT
DOWN
MENU
AC230V
GND
6
6
b
b
NVT Model
Power plug
Loading...
+ 8 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use