Ganz ZC-BX8039NBA, ZC-BT8039NBA, ZC-BNX8039NBA, ZC-BNX8922PBA Instruction Manual

CONNECTING the cables

About disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product.

Français/French

Élimination de votre ancien appareil

1. Ce symbole, représentant une poubelle sur roulettes barrée d'une croix, signifie que le produit est couvert par la directive européenne
2002/96/EC. 2. Tous les produits électriques et électroniques doivent être éliminés séparément de la chaîne de collecte municipale des
ordures, par l’ intermédiaire des installations de collecte prescrites et désignées par le gouvernement ou les autorités locales. 3. Une
élimination conforme aux instructions aidera à réduire les conséquences negatives et risques éventuels pour ironnement et la santé
humaine. 4. Pour plus d'informations concernant l'élimination de votre ancien appareil, veuillez contacter votre mairie, le service des
ordures ménagères ou encore le magasin où vous avez acheté ce produit.

Deutsch/German

Entsorgung von Altgeräten

1. Wenn dieses Symbol eines durchgestrichenen Abfalleimers auf einem Produkt angebracht ist, unterliegt dieses Produkt der
europäischen Richtlinie 2002/96/EC. 2. Alle Elektro- und Elektronik-Altgeräte müssen getrennt vom Hausmüll über die dafür staatlich
vorgesehenen Stellen entsorgt werden. 3. Mit der ordnungsgemäßen Entsorgung des alten Geräts vermeiden Sie Umweltschäden und
eine Gefährdung der rsönlichen Gesundheit. 4. Weitere Informationen zur Entsorgung des alten Geräts erhalten Sie bei der Stadtverwal­tung, beim Entsorgungsamt oder in dem Geschäft, wo Sie das Produkt erworben haben.

Italiano/Italian

RAEE: SMALTIMENTO DELLE VOSTRE VECCHIE APPARECCHIATURE

1. Quando il simbolo del “Cassonetto Barrato” è apposto su un prodotto, significa che lo stesso può ricadere nei termini previsti dalla
Direttiva Europea nr. 2002/96/EC in funzione dell’attuazione definita dalla Legislazione dei singoli stati membri dell’Unione Europea. 2.
Tutti i prodotti elettrici ed elettronici dovrebbero essere smaltiti separatamente dai rifiuti municipali, tramite appositi ontenitori, approvati
dall’Amministrazione Comunale o dalle Autorità Locali.

3. Il corretto smaltimento delle vostre vecchie apparecchiature, contribuirà a prevenire possibili conseguenze di impatto egativo sull’
ambiente e per la salute dell’uomo. 4. Per maggiori informazioni circa lo smaltimento delle vostre vecchie apparecchiature, siete pregati di
contattare l’ufficio municipale della vostra città, il servizio di smaltimento rifiuti o il punto vendita nel quale avete acquistato il prodotto.

Polski/Polish

Utylizacja starych urządzeń

1. Kiedy do produktu dołączony jest niniejszy przekreślony symbol kołowego pojemnika na śmieci, oznacza to, że produkt jest objęty
europejską dyrektywą 2002/96/EC. 2. Wszystkie elektryczne i elektroniczne produkty powinny być utylizowane niezależnie od odpadów
miejskich, zwykorzystaniem przeznaczonych do tego miejsc składowaniawskazanych przez rząd lub miejscowe władze. 3. Właściwy
sposób utylizacji starego urządzenia pomoże zapobiec potencjalnie negatywnemu wpływowi na zdrowie i środowisko. 4. Aby uzyskać
więcej informacji o sposobach utylizacji starych urządzeń, należy skontaktować się z władzami lokalnymi, przedsiębiorstwem zajmującym
się utylizacją odpadów lub sklepem, w którym produkt zostałkupiony.

Português/Portuguese

Eliminação do seu antigo aparelho

1. Quando este símbolo de latão cruzado estiver afixado a um produto, significa que o produto é abrangido pela Directiva Europeia
002/96/EC. 2. Todos os produtos eléctricos e electrónicos devem ser eliminados separadamente da coleta de lixo municipal através de
pontos de recolha designados, facilitados pelo governo ou autoridades locais. 3. A eliminação correcta do seu aparelho antigo ajuda a
evitar potenciais onsequências negativas para o ambiente e para a saúde humana. 4. Para obter informaçõs mais detalhadas acerca da
eliminação do seu aparelho antigo, contacte as autoridades locais, um service de eliminação de resíduos ou a loja onde comprou o
produto.

Español/Spanish

Cómo deshacerse de aparatos eléctricos y electrónicos viejos

1. Si en un producto aparece el símbolo de un contenedor de basura tachado, significa que éste se acoge a la Directiva 2002/96/EC.2.

Todos los aparatos eléctricos o electrónicos se deben desechar de forma distinta del servicio municipal de recogida de basura, a través

de puntos de recogida designados por el gobierno o las autoridades locales. 3. La correcta recogida y tratamiento de los dispositivos
inservibles contribuye a evitar riesgos potenciales para el medio ambiente y la salud pública. 4. Para obtener más información sobre

cómo deshacerse de sus aparatos eléctricos y electrónicos viejos, póngase en contacto con su ayuntamiento, el servicio de recogida de
basuras o el establecimiento donde adquirió el producto.

English

Disposal of your old appliance

1. When this crossed-out wheeled bin symbol is attached to a product it means the products covered by the European
Directive 2002/96/EC. 2. All electrical and electronic products should be disposed of separately from the municipal waste
stream via designated collection facilities appointed by the government or the local authorities. 3. The correct disposal of
your old appliance will help prevent potential negative consequences for the environment and human health. 4. For more
detailed information

Connect the power and video cables
Connect the video cable from the monitor and the coaxial video cable attached to
the camera body

In case of using DC 12V, connect DC jack from camera with power supply
(CLASS 2 ONLY) If necessary, after connecting DC jack from Camera
to “ Additional power connector(Accessory)” connect it with power supply.

In case of using AC 24V, after connecting DC jack from camera to
“Additional power connector(accessory)” connect it with power supply
(CLASS ONLY 2)

☞Attention

Specification below is recommended as an Output rated capacity of Power supply
that is connected to camera

☞Attention

Be sure to check that the cables are connected correctly before turning on
the power.
Turning on the power when the cables are connected with incorrect polarity
may damage the camera .

CBC Co.,Ltd

Tokyo, Japan

www.GANZ.jp

SPECIFICATION

SAFETY PRECAUTIONS

PRODUCT FEATURES

OUTDOOR COLOR CAMERA

INSTRUCTION MANUAL

ZC-BT/BX

8000

SERIES

PART DESCRIPTION

MODEL DESCRIPTION

Thank you for your purchase of this product. Before operating the product, please read this instruction manual
carefully to ensure proper use of the product. Please store this instruction manual in a safe place for future
reference.

The installation should be made by a qualified service person and should conform to all local codes.

This symbol indicates that there is a possibility of death or damage to operator or others.
To prevent fire or electric shock, do not expose this product to rain or moisture.

WARNING

This symbol indicates that there is a possibility of injury or damage to equipment.

CAUTIONS

The CE Marking is a Directive Conformity mark of the European Union(EU)

*Caution : ZC-BX housing is desinged to adjust focus and focal length externally. Once
Front Cover is unlocked for any reason, its outdoor performance can not be guaranteed.

1. IR LED

2. Photo Sensor

3. Front Cover

4. Sunshield

5. Focus Adjustment Lever

6. View Angle Adjustment Lever

7.

Multi Tact Switch for OSD control

8. Service Jack Socket

9. Locking Ring(body)

10. Locking Ring(bracket)

11. Mounting Base

12. Video Output Connector

13. Power Input Jack

1. IR LED

2. Photo Sensor

3. Front Cover

4. Sunshield

5. Exterior Focus Adjustment Screw

6. Exterior View Angle Adjustment Screw

7. Locking Ring (body)

8. Locking Ring (bracket)

9. Mounting Base

10. Video Output Connector

11. Power Input Jack

12.

Multi Tact Switch for OSD control

* Unscrew the Front Cover counter-clockwise to open the unit for adjustments. Once
adjusted, screw the Front Cover back and tighten it clockwise, and refrain from opening
and closing frequently to ensure the best water-proof and condensation free perfor­mance.

ZC-BT series

ZC-BX series

1/3” Type Inter line transfer CCD(Sony HAD II CCD)

768(H) x 494(V)

More than 600 TVL

0lx (B/W Mode/LED On)

600TVL High Resolution

※The specifications and/or appearance of the product may change without a prior notice

4

1

2 3

5

6

1

2

345 6

7 8

7

9

10

11

12

13

8

9

10

11

12

* Option

1. Service Monitor cable

2. Heater

3. Lens variations
(Please contact your dealers for more details)

* Option

1. Heater

2. Lens variations
(Please contact your dealers for more details)

5.7 Watt(AC24V), 6.5 Watt(DC12V)

Approx. 750g(Included sun shield)

209mm(L) X 72Ф (not included sun shield)

ATW1, ATW2, AWC, Mannal (Selectable)

-. 1/3” SONY Super HAD-II CCD

-. Built-in “COMPUTAR ” Vari-Focal Lens

-. True or Digital Day & Night

-. DC12V or AC24V Operation, Auto-sensing

-. Photocell Activate IR Lights at Night

-. IP67 rating for all weather performance

-. Digital WDR(Wide Dynamic Range)

-. IR Smart

-. Back Light Compensation

-. High Light Compensation

-. Motion Detection

-. Privacy Masking

-. Digital Noise Reduction(2D)

-. Lens Shading Compensation

-. Low Power Consumption

-. Multi Tact Switch for OSD control

700mA±10%
500mA±10%

1/60 sec, FLK,

1/60 ~1/100,000(Selectable)

Lens Specification

Focal Length

3~9mm

3.3~12mm

9~22mm

Aperture

1:1.2~2.1

1:1.4~2.4

1:1.4~2.9

1:1.4~1.6

View Angle

90~31.8

89.8~23.9

32.1~13.1

NTSC

ZC-BT/BX8039NBA

ZC-BNT/BNX8039NBA

ZC-BT/BX8312NBA

ZC-BNT/BNX8312NBA

ZC-BT/BX8922NBA

ZC-BNT/BNX8922NBA

ZC-BT/BX8039PBA

ZC-BNT/BNX8039PBA

ZC-BT/BX8312PBA

ZC-BNT/BNX8312PBA

ZC-BT/BX8922PBA

ZC-BNT/BNX8922PBA

PAL

D/N

Digital

True

Digital

True

Digital

True

Camera Models

Color / Day & Night

TV System

Scanning System

Image Sensor

Effective Elements

Scanning Frequency

Video Output
Horizontal Resolution
Minimum Ilumination

Day/Night

S/N Ratio

Gamma Characteristic

Sync. System

Electronic Shutter

White Balance

Power Supply

Power Consumption

Ambient Temperature

Ambient Humidity

External Dimensions

Weight
Switch

PALNTSC

2 : 1 Interlace

15.625kHz(H) x 50.00Hz(V)

1.0Vp-p/75Ω

Digital or True Day/ Night

More than 50dB(at minimum AGC gain)

0.45

Internal only

AC24V±10% 50Hz±1Hz,
DC12V±10%

Operation : -20°C to +50°C / Storage : -20°C to +60°C

Operation : Max. 85%RH / Storage : Max. 95%RH

Multi Tact Switch for OSD control

Accessories

Self-tapping Screw : 3ea, Template : 1ea,
Instruction Manual : 1ea, Additional Power Connector: 1ea

15.734kHz(H) x 59.94Hz(V)

AC24V±10% 60Hz±1Hz,
DC12V±10%

752(H) x 582(V)

1/50 sec, FLK,

1/50 ~1/100,000(Selectable)

ADJUSTMENT

INSTALLATION

2. OSD Switch and OSD Menu

1) LENS

2) EXPOSURE

3) WHITE BALANCE

4) BACKLIGHT

6) SPECIAL

5) DAY&NIGHT

* START SET UP MENU

Use the

Multi Tact Switch within the camerra

* BT Series

* BX Series

Press the Middle

Multi Tact Switch, the main setup menu is displayed

on the monitor screen

BRIGHTNESS adjusts DC level of the lens

Do not change the above factory-set levels

*darker brighter

(wider range)
(narrower range)

Select the function
by using the switch

* Simply make the adjustment
in the following order to help
make the focusing easier:

- Select MANUAL

- Adjust lens focus well

- Then return to DC

* A function with the icon
has sub menus.
To select a sub menu,
select a function with
the icon and press

Turn the Switch toward Left or Right side, Select DC or MANUAL

Up

Down

Enter

Right

Left

SETUP

LENS DC
EXPOSURE
WHITE BAL ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
SPECIAL
RESET
EXIT

SETUP

LENS DC
EXPOSURE
WHITE BAL ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
SPECIAL
RESET
EXIT

SETUP

LENS DC
EXPOSURE
WHITE BAL ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
SPECIAL
RESET
EXIT

SETUP

ATW1
ATW2

MANUAL

AWC->SET

LENS DC
EXPOSURE
WHITE BAL ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
SPECIAL
RESET
EXIT

SETUP

SETUP

LENS DC
EXPOSURE
WHITE BAL ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
SPECIAL
RESET
EXIT

ON

DWDR OFF

000
~ 063

DWDR

MOTION DETECTION

* SPECIAL SUB MANU LIST

FACTORY RESSET

ON

000~255

OFF

OFF
ON

AREA 1 AREA 2

000 ~ 255

RETURN

000 ~ 255
000 ~ 255

ID&TITLE

FONT

HLC

BLC

AUTO

COLOR

BW

EXT

SETUP

LENS DC
EXPOSURE
WHITE BAL ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
SPECIAL
RESET
EXIT

SHUTTER AUTO

1/60 or 1/50
FLK

1/250 ~1/100,000

SHUTTER

MANUAL

BRIGHTNESS 000 ~ 255

BRIGHTNESS

Attention

Attention

WARNING

WB MANUAL

MANUAL

BLUE
RED

000~010

000~255

000~009
000~011
000~010

OUTDOOR

000~255

INDOOR

AREA SEL.

LEVEL

ALL DAY NIGHT ONLY

MODE

BURST

ON OFF

IR SMART

HIGH LOW

IR LEVEL

AREA STATE

When select BLC, AREA 1 always turns on

Attention

When select ON,
AREA 1 always turns on

* LENS SHAD : LENS SHADING COMPENSATION
* 2 DNR : DIGITAL NOISE REDUCTION(2D)
* NEG IMAGE : NEGATIVE IMAGE

GAIN
HEIGHT
WIDTH
LEFT/RIGHT

TOP/BOTTOM

1 SEC~

1 SEC~

60SEC

60SEC

ON OFF

005~224 030~224

*DDN *TDN

000~219 000~194

D->N LEVEL
D->N DELAY
N->D LEVEL
N->D DELAY

000~008

000~255

000~013
000~005
000~009

IR GAIN
HEIGHT
WIDTH
LEFT/RIGHT
TOP/BOTTOM

000~255

SETUP

LENS DC
EXPOSURE
WHITE BAL ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
SPECIAL
RESET
EXIT

7) RESET & EXIT

SETUP

LENS DC
EXPOSURE
WHITE BAL ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
SPECIAL
RESET
EXIT

SPECIAL

CAM TITLE ON
MOTION OFF
PRIVACY OFF
IMAGE ADJ.
DPC
LANGUAGE ENGLISH
VERSION 10 10 21
RETURN RET

ON

中文

SPECIAL

CAM TITLE ON
MOTION
PRIVACY OFF
IMAGE ADJ.
DPC
LANGUAGE ENGLISH
VERSION 10 10 21
RETURN RET

ON

PRIVACY MASKING

SPECIAL

CAM TITLE ON
MOTION OFF
PRIVACY
IMAGE ADJ.
DPC
LANGUAGE ENGLISH
VERSION 10 10 21
RETURN RET

ON

ON OFF

ON OFF

AREA 1~ AREA 4

000 ~ 013

000 ~ 013

000 ~ 011
000 ~ 011
000 ~ 255

AREA SEL.

AREA STATE
HEIGHT
WIDTH
LEFT/RIGHT
TOP/BOTTOM
DEGREE
VIEW

IMAGE ADJUST

SPECIAL

CAM TITLE ON
MOTION
PRIVACY OFF
IMAGE ADJ.
DPC
LANGUAGE ENGLISH
VERSION 10 10 21
RETURN RET

ON

ON OFF

OFF ON

ON OFF

000~255
000~031

CRT

LCD

* GAMMA
* PED LEVEL
* COLOR GAIN

USER

LENS SHAD.
2DNR

ON OFFMIRROR
FONT COLOR
CONTRAST
SHARPNESS
DISPLAY

NEG. IMAGE

* DEAD PIXEL
COMPENSATION

* UPDATE VERSION

* CAMERA TITLE

ON OFF

AREA 1~ AREA 8

000 ~180

000 ~108

000 ~167
000 ~092
000 ~015

AREA SEL.

AREA STATE
HEIGHT
WIDTH
LEFT/RIGHT
TOP/BOTTOM
COLOR

CBC Co.,Ltd

Tokyo, Japan
www.GANZ.jp

OSD MENU FUNCTION

LENS

EXPOSURE

WHITE BAL

BACKLIGHT

DAY&NIGHT

SPECIAL

RESET

EXIT

DC MANUAL

SHUTTER BRIGHTNESS AGC DWDR

ATW1 ATW2 AWC -> SET MANUAL

OFF BLC HLC

AUTO COLOR B/W EXT

CAM TITLE MOTION PRIVACY IMAGE ADJ

DPC LANGUAGE VERSION

FACTORY

Direction and Enter Guide

Down

Down

Enter

RightLeft

This camera can be adjusted easily for
viewing in all directions.
After attaching the camera on the wall or
ceiling, adjust camera for the desired
direction.
Then tighten each locking ring and lock
rings with allen wrench as shown in
pircture.

Adjusting the camera direction

Adjusting the view angle and focus

1. Direction and Lens

For ZC-BT series

1) Move the lever to adjust focus and
zoom after taking off the Front Cover

2) Tuurn focus and zoom levers in clock
wise direction to fix the poositions

For ZC-BXseries

Turn the exterior Focs and Angle of
viewing Screw to make adjust by screw­driver.

BT

BX

* Attaching to the ceiling or wall

This section explains how to install the unit where cables are running through the
interior of the ceiling or wall.

1.Drilling holes in the ceiling or wall:
Use the template included to mark out the position on the ceiling or wall where you
want to install the unit.

2.When running cables through the interior of the ceiling or wall :
Use the template, and drill three holes for screws used to attach the camera body and
one hole for the cables (Cables).

* Special instruction

To ensure the best low light performance, this camera has IR LED device to change
automatically to night mode when the environment gets dark. If the high light source
or some object reflecting very bring light is placed within 1m from the installed camera,
it interferes with IR LED performance so that Day & Night function may not perform well.
Ensure that the field conditions are suitable before installing the camera unit.

Attaching to the ceiling Attaching to the wall

Right

Left

Up