Ganz ZC-BT8039PBA, ZC-BX8039PBA, ZC-BNT8039NBA, ZC-BNT8039PBA, ZC-BNX8039PBA Instruction Manual
...
CONNECTING the cables
About disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product.
Français/French
Élimination de votre ancien appareil
1. Ce symbole, représentant une poubelle sur roulettes barrée d'une croix, signifie que le produit est couvert par la directive européenne
2002/96/EC. 2. Tous les produits électriques et électroniques doivent être éliminés séparément de la chaîne de collecte municipale des
ordures, par l’ intermédiaire des installations de collecte prescrites et désignées par le gouvernement ou les autorités locales. 3. Une
élimination conforme aux instructions aidera à réduire les conséquences negatives et risques éventuels pour ironnement et la santé
humaine. 4. Pour plus d'informations concernant l'élimination de votre ancien appareil, veuillez contacter votre mairie, le service des
ordures ménagères ou encore le magasin où vous avez acheté ce produit.
Deutsch/German
Entsorgung von Altgeräten
1. Wenn dieses Symbol eines durchgestrichenen Abfalleimers auf einem Produkt angebracht ist, unterliegt dieses Produkt der
europäischen Richtlinie 2002/96/EC. 2. Alle Elektro- und Elektronik-Altgeräte müssen getrennt vom Hausmüll über die dafür staatlich
vorgesehenen Stellen entsorgt werden. 3. Mit der ordnungsgemäßen Entsorgung des alten Geräts vermeiden Sie Umweltschäden und
eine Gefährdung der rsönlichen Gesundheit. 4. Weitere Informationen zur Entsorgung des alten Geräts erhalten Sie bei der Stadtverwaltung, beim Entsorgungsamt oder in dem Geschäft, wo Sie das Produkt erworben haben.
Italiano/Italian
RAEE: SMALTIMENTO DELLE VOSTRE VECCHIE APPARECCHIATURE
1. Quando il simbolo del “Cassonetto Barrato” è apposto su un prodotto, significa che lo stesso può ricadere nei termini previsti dalla
Direttiva Europea nr. 2002/96/EC in funzione dell’attuazione definita dalla Legislazione dei singoli stati membri dell’Unione Europea. 2.
Tutti i prodotti elettrici ed elettronici dovrebbero essere smaltiti separatamente dai rifiuti municipali, tramite appositi ontenitori, approvati
dall’Amministrazione Comunale o dalle Autorità Locali.
3. Il corretto smaltimento delle vostre vecchie apparecchiature, contribuirà a prevenire possibili conseguenze di impatto egativo sull’
ambiente e per la salute dell’uomo. 4. Per maggiori informazioni circa lo smaltimento delle vostre vecchie apparecchiature, siete pregati di
contattare l’ufficio municipale della vostra città, il servizio di smaltimento rifiuti o il punto vendita nel quale avete acquistato il prodotto.
Polski/Polish
Utylizacja starych urządzeń
1. Kiedy do produktu dołączony jest niniejszy przekreślony symbol kołowego pojemnika na śmieci, oznacza to, że produkt jest objęty
europejską dyrektywą 2002/96/EC. 2. Wszystkie elektryczne i elektroniczne produkty powinny być utylizowane niezależnie od odpadów
miejskich, zwykorzystaniem przeznaczonych do tego miejsc składowaniawskazanych przez rząd lub miejscowe władze. 3. Właściwy
sposób utylizacji starego urządzenia pomoże zapobiec potencjalnie negatywnemu wpływowi na zdrowie i środowisko. 4. Aby uzyskać
więcej informacji o sposobach utylizacji starych urządzeń, należy skontaktować się z władzami lokalnymi, przedsiębiorstwem zajmującym
się utylizacją odpadów lub sklepem, w którym produkt zostałkupiony.
Português/Portuguese
Eliminação do seu antigo aparelho
1. Quando este símbolo de latão cruzado estiver afixado a um produto, significa que o produto é abrangido pela Directiva Europeia
002/96/EC. 2. Todos os produtos eléctricos e electrónicos devem ser eliminados separadamente da coleta de lixo municipal através de
pontos de recolha designados, facilitados pelo governo ou autoridades locais. 3. A eliminação correcta do seu aparelho antigo ajuda a
evitar potenciais onsequências negativas para o ambiente e para a saúde humana. 4. Para obter informaçõs mais detalhadas acerca da
eliminação do seu aparelho antigo, contacte as autoridades locais, um service de eliminação de resíduos ou a loja onde comprou o
produto.
Español/Spanish
Cómo deshacerse de aparatos eléctricos y electrónicos viejos
1. Si en un producto aparece el símbolo de un contenedor de basura tachado, significa que éste se acoge a la Directiva 2002/96/EC.2.
Todos los aparatos eléctricos o electrónicos se deben desechar de forma distinta del servicio municipal de recogida de basura, a través
de puntos de recogida designados por el gobierno o las autoridades locales. 3. La correcta recogida y tratamiento de los dispositivos
inservibles contribuye a evitar riesgos potenciales para el medio ambiente y la salud pública. 4. Para obtener más información sobre
cómo deshacerse de sus aparatos eléctricos y electrónicos viejos, póngase en contacto con su ayuntamiento, el servicio de recogida de
basuras o el establecimiento donde adquirió el producto.
English
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a product it means the products covered by the European
Directive 2002/96/EC. 2. All electrical and electronic products should be disposed of separately from the municipal waste
stream via designated collection facilities appointed by the government or the local authorities. 3. The correct disposal of
your old appliance will help prevent potential negative consequences for the environment and human health. 4. For more
detailed information
Connect the power and video cables
Connect the video cable from the monitor and the coaxial video cable attached to
the camera body
In case of using DC 12V, connect DC jack from camera with power supply
(CLASS 2 ONLY) If necessary, after connecting DC jack from Camera
to “ Additional power connector(Accessory)” connect it with power supply.
In case of using AC 24V, after connecting DC jack from camera to
“Additional power connector(accessory)” connect it with power supply
(CLASS ONLY 2)
☞Attention
Specification below is recommended as an Output rated capacity of Power supply
that is connected to camera
☞Attention
Be sure to check that the cables are connected correctly before turning on
the power.
Turning on the power when the cables are connected with incorrect polarity
may damage the camera .
CBC Co.,Ltd
Tokyo, Japan
www.GANZ.jp
SPECIFICATION
SAFETY PRECAUTIONS
PRODUCT FEATURES
OUTDOOR COLOR CAMERA
INSTRUCTION MANUAL
ZC-BT/BX
8000
SERIES
PART DESCRIPTION
MODEL DESCRIPTION
Thank you for your purchase of this product. Before operating the product, please read this instruction manual
carefully to ensure proper use of the product. Please store this instruction manual in a safe place for future
reference.
The installation should be made by a qualified service person and should conform to all local codes.
This symbol indicates that there is a possibility of death or damage to operator or others.
To prevent fire or electric shock, do not expose this product to rain or moisture.
WARNING
This symbol indicates that there is a possibility of injury or damage to equipment.
CAUTIONS
The CE Marking is a Directive Conformity mark of the European Union(EU)
*Caution : ZC-BX housing is desinged to adjust focus and focal length externally. Once
Front Cover is unlocked for any reason, its outdoor performance can not be guaranteed.
1. IR LED
2. Photo Sensor
3. Front Cover
4. Sunshield
5. Focus Adjustment Lever
6. View Angle Adjustment Lever
7.
Multi Tact Switch for OSD control
8. Service Jack Socket
9. Locking Ring(body)
10. Locking Ring(bracket)
11. Mounting Base
12. Video Output Connector
13. Power Input Jack
1. IR LED
2. Photo Sensor
3. Front Cover
4. Sunshield
5. Exterior Focus Adjustment Screw
6. Exterior View Angle Adjustment Screw
7. Locking Ring (body)
8. Locking Ring (bracket)
9. Mounting Base
10. Video Output Connector
11. Power Input Jack
12.
Multi Tact Switch for OSD control
* Unscrew the Front Cover counter-clockwise to open the unit for adjustments. Once
adjusted, screw the Front Cover back and tighten it clockwise, and refrain from opening
and closing frequently to ensure the best water-proof and condensation free performance.
ZC-BT series
ZC-BX series
1/3” Type Inter line transfer CCD(Sony HAD II CCD)
768(H) x 494(V)
More than 600 TVL
0lx (B/W Mode/LED On)
600TVL High Resolution
※The specifications and/or appearance of the product may change without a prior notice
4
1
2 3
5
6
1
2
345 6
7 8
7
9
10
11
12
13
8
9
10
11
12
* Option
1. Service Monitor cable
2. Heater
3. Lens variations
(Please contact your dealers for more details)
* Option
1. Heater
2. Lens variations
(Please contact your dealers for more details)
5.7 Watt(AC24V), 6.5 Watt(DC12V)
Approx. 750g(Included sun shield)
209mm(L) X 72Ф (not included sun shield)
ATW1, ATW2, AWC, Mannal (Selectable)
-. 1/3” SONY Super HAD-II CCD
-. Built-in “COMPUTAR ” Vari-Focal Lens
-. True or Digital Day & Night
-. DC12V or AC24V Operation, Auto-sensing
-. Photocell Activate IR Lights at Night
-. IP67 rating for all weather performance
-. Digital WDR(Wide Dynamic Range)
-. IR Smart
-. Back Light Compensation
-. High Light Compensation
-. Motion Detection
-. Privacy Masking
-. Digital Noise Reduction(2D)
-. Lens Shading Compensation
-. Low Power Consumption
-. Multi Tact Switch for OSD control
700mA±10%
500mA±10%
1/60 sec, FLK,
1/60 ~1/100,000(Selectable)
Lens Specification
Focal Length
3~9mm
3.3~12mm
9~22mm
Aperture
1:1.2~2.1
1:1.4~2.4
1:1.4~2.9
1:1.4~1.6
View Angle
90~31.8
89.8~23.9
32.1~13.1
NTSC
ZC-BT/BX8039NBA
ZC-BNT/BNX8039NBA
ZC-BT/BX8312NBA
ZC-BNT/BNX8312NBA
ZC-BT/BX8922NBA
ZC-BNT/BNX8922NBA
ZC-BT/BX8039PBA
ZC-BNT/BNX8039PBA
ZC-BT/BX8312PBA
ZC-BNT/BNX8312PBA
ZC-BT/BX8922PBA
ZC-BNT/BNX8922PBA
PAL
D/N
Digital
True
Digital
True
Digital
True
Camera Models
Color / Day & Night
TV System
Scanning System
Image Sensor
Effective Elements
Scanning Frequency
Video Output
Horizontal Resolution
Minimum Ilumination
Day/Night
S/N Ratio
Gamma Characteristic
Sync. System
Electronic Shutter
White Balance
Power Supply
Power Consumption
Ambient Temperature
Ambient Humidity
External Dimensions
Weight
Switch
PALNTSC
2 : 1 Interlace
15.625kHz(H) x 50.00Hz(V)
1.0Vp-p/75Ω
Digital or True Day/ Night
More than 50dB(at minimum AGC gain)
0.45
Internal only
AC24V±10% 50Hz±1Hz,
DC12V±10%
Operation : -20°C to +50°C / Storage : -20°C to +60°C
Operation : Max. 85%RH / Storage : Max. 95%RH
Multi Tact Switch for OSD control
Accessories
Self-tapping Screw : 3ea, Template : 1ea,
Instruction Manual : 1ea, Additional Power Connector: 1ea
15.734kHz(H) x 59.94Hz(V)
AC24V±10% 60Hz±1Hz,
DC12V±10%
752(H) x 582(V)
1/50 sec, FLK,
1/50 ~1/100,000(Selectable)
ADJUSTMENT
INSTALLATION
1. Direction and Lens
The camera body is set in a tri-axial mounting allowing movement in the
pan, tilt and rotational planes.
1) Adjust the direction of the lens so it faces the subject
2) Move the lever to adjust focus and angle of view
3) When you finished adjusting the direction of the lens, tighten the locking
screw with a screwdriver.
1)
3)
2)
Please use fixing screws suitable for the material of the ceiling or wall when
attaching the camera body. The mounting screws provided are not recommended
to use at all conditions.
* Surface mount
This section explains how to install the unit where cables are running through the
interior of the ceiling or wall.
1. Drilling holes in the ceiling or wall: Use the template included to mark out the
position on the ceiling or wall where you want to install the unit.
2. When running cables through the interior of the ceiling or wall : Use the template,
and drill two or three holes for screws used to attach the camera body and one hole
for the cables (Cables).
* Flush mount
- Embedding in the ceiling or wall
Be sure to use the Mounting Adaptor Ring when embedding the unit in the ceiling or wall
1. Drilling holes in the ceiling or wall : Use the template included to mark out
the position on the ceiling or wall where you want to install the unit.* Use the template,
drill 4 holes for screw used to attache the Mounting Adaptor Ring. Then, follow the
perforations on the template and cut out a hole to embed the camera body.
2. Attaching the Mounting Adaptor ring : Attach the adaptor ring to the ceiling or wall to
which you want to attach the camera body. Please use fixing screws suitable for the
material of the ceiling or wall when attaching the camera body. We recommend using
screws with a 4mm diameter.
3. Attaching the camera body : Remove the surface mount cover from the camera
body. Remove the body cover and attached camera body to the Mounting Adapter Ring.
- Attaching to gangbox
1. Remove the surface mount cover from the camera body.
2. Attaching the camera body : Attach the camera body to the gangbox.
Please use screws that are suitable for the gang box.
(Use breakable holes on the camera body bottom)
2. OSD Switch and OSD Menu
1) LENS
2) EXPOSURE
3) WHITE BALANCE
4) BACKLIGHT
6) SPECIAL
5) DAY&NIGHT
* START SET UP MENU
Use the
Multi Tact Switch within the camerra
Press the Middle
Multi Tact Switch, the main setup menu is displayed
on the monitor screen
BRIGHTNESS adjusts DC level of the lens
Do not change the above factory-set levels
*darker brighter
(wider range)
(narrower range)
Select the function
by using the switch
* Simply make the adjustment
in the following order to help
make the focusing easier:
- Select MANUAL
- Adjust lens focus well
- Then return to DC
* A function with the icon
has sub menus.
To select a sub menu,
select a function with
the icon and press
Turn the Switch toward Left or Right side, Select DC or MANUAL
Up
Down
Enter
Right
Left
SETUP
LENS DC
EXPOSURE
WHITE BAL ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
SPECIAL
RESET
EXIT
SETUP
LENS DC
EXPOSURE
WHITE BAL ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
SPECIAL
RESET
EXIT
SETUP
LENS DC
EXPOSURE
WHITE BAL ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
SPECIAL
RESET
EXIT
SETUP
ATW1
ATW2
MANUAL
AWC->SET
LENS DC
EXPOSURE
WHITE BAL ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
SPECIAL
RESET
EXIT
SETUP
SETUP
LENS DC
EXPOSURE
WHITE BAL ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
SPECIAL
RESET
EXIT
ON
DWDR OFF
000
~ 063
DWDR
MOTION DETECTION
* SPECIAL SUB MANU LIST
FACTORY RESSET
ON
000~255
OFF
OFF
ON
AREA 1 AREA 2
000 ~ 255
RETURN
000 ~ 255
000 ~ 255
ID&TITLE
FONT
HLC
BLC
AUTO
COLOR
BW
EXT
SETUP
LENS DC
EXPOSURE
WHITE BAL ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
SPECIAL
RESET
EXIT
SHUTTER AUTO
FLK
1/250 ~1/100,000
SHUTTER
MANUAL
BRIGHTNESS 000 ~ 255
BRIGHTNESS
Attention
Attention
WARNING
WB MANUAL
MANUAL
BLUE
RED
000~010
000~255
000~009
000~011
000~010
OUTDOOR
000~255
INDOOR
AREA SEL.
LEVEL
ALL DAY NIGHT ONLY
MODE
BURST
ON
OFF
IR SMART
HIGH LOW
IR LEVEL
AREA STATE
When select BLC, AREA 1 always turns on
Attention
When select ON,
AREA 1 always turns on
* LENS SHAD : LENS SHADING COMPENSATION
* 2 DNR : DIGITAL NOISE REDUCTION(2D)
* NEG IMAGE : NEGATIVE IMAGE
GAIN
HEIGHT
WIDTH
LEFT/RIGHT
TOP/BOTTOM
1 SEC~
1 SEC~
60SEC
60SEC
ON OFF
005~224 020~224
*DDN *TDN
000~219 000~204
D->N LEVEL
D->N DELAY
N->D LEVEL
N->D DELAY
000~008
000~255
000~013
000~005
000~009
IR GAIN
HEIGHT
WIDTH
LEFT/RIGHT
TOP/BOTTOM
000~255
SETUP
LENS DC
EXPOSURE
WHITE BAL ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
SPECIAL
RESET
EXIT
7) RESET & EXIT
SETUP
LENS DC
EXPOSURE
WHITE BAL ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
SPECIAL
RESET
EXIT
SPECIAL
CAM TITLE ON
MOTION OFF
PRIVACY OFF
IMAGE ADJ.
DPC
LANGUAGE ENGLISH
VERSION 10 10 21
RETURN RET
ON
中文
SPECIAL
CAM TITLE ON
MOTION
PRIVACY OFF
IMAGE ADJ.
DPC
LANGUAGE ENGLISH
VERSION 10 10 21
RETURN RET
ON
PRIVACY MASKING
SPECIAL
CAM TITLE ON
MOTION OFF
PRIVACY
IMAGE ADJ.
DPC
LANGUAGE ENGLISH
VERSION 10 10 21
RETURN RET
ON
ON OFF
ON OFF
AREA 1~ AREA 4
000 ~ 013
000 ~ 013
000 ~ 011
000 ~ 011
000 ~ 255
AREA SEL.
AREA STATE
HEIGHT
WIDTH
LEFT/RIGHT
TOP/BOTTOM
DEGREE
VIEW
IMAGE ADJUST
SPECIAL
CAM TITLE ON
MOTION
PRIVACY OFF
IMAGE ADJ.
DPC
LANGUAGE ENGLISH
VERSION 10 10 21
RETURN RET
ON
ON OFF
OFF ON
ON OFF
000~255
000~031
CRT
LCD
* GAMMA
* PED LEVEL
* COLOR GAIN
USER
LENS SHAD.
2DNR
ON OFFMIRROR
FONT COLOR
CONTRAST
SHARPNESS
DISPLAY
NEG. IMAGE
* DEAD PIXEL
COMPENSATION
* UPDATE VERSION
* CAMERA TITLE
ON OFF
AREA 1~ AREA 8
000 ~180
000 ~108
000 ~167
000 ~092
000 ~015
AREA SEL.
AREA STATE
HEIGHT
WIDTH
LEFT/RIGHT
TOP/BOTTOM
COLOR
CBC Co.,Ltd
Tokyo, Japan
www.GANZ.jp
OSD MENU FUNCTION
LENS
EXPOSURE
WHITE BAL
BACKLIGHT
DAY&NIGHT
SPECIAL
RESET
EXIT
DC MANUAL
SHUTTER BRIGHTNESS AGC DWDR
ATW1 ATW2 AWC -> SET MANUAL
OFF BLC HLC
AUTO COLOR B/W EXT
CAM TITLE MOTION PRIVACY IMAGE ADJ
DPC LANGUAGE VERSION
FACTORY
Direction and Enter Guide
Up
Down
Enter
RightLeft
It is not recommended to view through the circledd vertical
area especiallly witth LED light trurned on as the picture
image is subject to a LED light reflection.
Since these image deterionration is normal, installers are
encouraged to check the image under LED-ON environment
at the time of installation in order to avoid unexpected image
deterioration.
The picture image may deteriorate when
the lens is leaned toward ceiling or wall
to view through the circled vertical area
and the effect may depending on the
view angles.
☞Attention
Surface mount
Flush mount
(embedding in ceiling or wall)
(Attaching to a gang box)
* Use the elastic band to
hang the camera unit
upon necessity for the
installation.
WARNING : Do not
release your hands
from the camera
unit until securing it.
* Mounting
Adaptor Ring
(optional)
* Camera Unit
NTSC: 1/60, PAL: 1/50
Loading...