Ganz SS-1 Specsheet

SS1 Sunshields

Instructions for Use

Eng.

1 DESCRIPTION

Provides protection from the direct rays of the sun and
promotes cooling to reduce internal housing temperatures.

SS1: For use with H1 & H2 Series Housings.

Items Supplied:

SS1

Sunshield (1)
Hardware Kit (315 3169 001)

Rubber Washer (1)
Sunshield Nut (1)
Latch (1)
M3 x 8 Phillips Pan Head Screw (1)
M3 x 16 Phillips Pan Head Screws (2)

Tools Required:

Adjustable Wrench.
Phillips Screwdriver.

2 INSTALLATION

2.1 Assembling the Latch

1. To assemble the sunshield's latch mechanism, assemble the
rubber washer onto the M3 x 8 screw. Push the screw
through the hole in the front of the sunshield. Assemble the
sunshield nut into the latch (channel down). From the
inside of the sunshield put the screw into the slot in the
latch. Rotate the screw into the nut. The channel will keep
the nut from twisting. Do not tighten the screw and nut.
This will be done later in the assembly. See Figure 1.

Figure 1: Assembling Latch Mechanism

2.2 Installing Sunshield

H1 & H2 Series Housings

1. Place the sunshield over the housing. Align the studs with
the threads in the rear cap.

2. Insert the 16 mm long screws into the sunshield and screw
them into the rear cap. Do not tighten screws. See Figure 2.

Figure 2: Installing Sunshield

2.3 Final Assembly

1. Rotate the sunshield over the housing. Allow the latch to
engage the notch in the front cap. See Figure 3.

Figure 3: Final Assembly

2. Tighten the screws in the rear cap.

3. Push the latch into the front cap as far as possible.

4. Tighten the latch's nut and screw.

3935 890 33711 00-6June © 2001 CBC (America) Corp.
Printed in U.S.A. New York: 55 Mall Drive, Commack, NY 11725 Tel: [phone] or 631 864 9700 Fax: [phone]

California: 20521 Earl Street, Torrance, CA 90503 Tel: [phone] or 310 793 1500 Fax: [phone]
www.cbcamerica.com/cctv

Data subject to change without notice

Front of Sunshield

M3 Screw

Rubber Washer

Sunshield Assembly

Screw

Housing

Screw

Front Cap Notch

Latch

Sunshield Nut

Latch