Ganz NR8-32M78 Quick Start Manual

GANZ ZR8 Network Video Recorder(NVR)
Quick Start Guide
Issue V1.1
Date 2016-02-22
Precautions
Network Video Recorder(NVR)
Quick Start Guide
ii
Issue V1.1 (2016-02-22)
Precautions
Precautions
Fully understand this document before using this device, and strictly observe rules in this document when using this device. If you install this device in public places, provide the tip "You have entered the area of electronic surveillance" in an eye­catching place. Failure to correctly use electrical products may cause fire and severe injuries. To prevent accidents, carefully read the following context:
Symbols
This document may contain the following symbols whose meanings are described accordingly.
Symbol
Description
It alerts you to fatal dangers which, if not avoided, may cause deaths or severe injuries.
It alerts you to moderate dangers which, if not avoided, may cause minor or moderate injuries.
It alerts you to risks. Neglect of these risks may cause device damage, data loss, device performance deterioration, or unpredictable results.
It provides a tip that may help you resolve problems or save time.
It provides additional information.
To prevent electric shocks or other dangers, keep power plugs dry and clean.
Strictly observe installation requirements when installing the device. The manufacturer shall not be held responsible for device damage caused by users' non­conformance to these requirements.
Network Video Recorder(NVR) Quick Start Guide
Precautions
Issue V1.1 (2016-02-22) iii
Strictly conform to local electrical safety standards and use power adapters that are marked with the LPS standard when installing and using this device. Otherwise, this device may be damaged.
Use accessories delivered with this device. The voltage must meet input voltage requirements for this device.
If this device is installed in places with unsteady voltage, ground this device to discharge high energy such as electrical surges in order to prevent the power supply from burning out.
When this device is in use, ensure that no water or any liquid flows into the device. If water or liquid unexpectedly flows into the device, immediately power off the device and disconnect all cables (such as power cables and network cables) from this device.
Do not focus strong light (such as lighted bulbs or sunlight) on this device. Otherwise, the service life of the image sensor may be shortened.
If this device is installed in places where thunder and lightning frequently occur, ground the device nearby to discharge high energy such as thunder strikes in order to prevent device damage.
Avoid heavy loads, intensive shakes, and soaking to prevent damages during transportation and storage. The warranty does not cover any device damage that is caused during secondary packaging and transportation after the original packaging is taken apart.
Protect this device from fall-down and intensive strikes, keep the device away from magnetic field interference, and do not install the device in places with shaking surfaces or under shocks.
Clean the device with a soft dry cloth. For stubborn dirt, dip the cloth into slight neutral cleanser, gently wipe the dirt with the cloth, and then dry the device.
Do not jam the ventilation opening. Follow the installation instructions provided in this document when installing the device.
Keep the device away from heat sources such as radiators, electric heaters, or other heat equipment.
Keep the device away from moist, dusty, extremely hot or cold places, or places with strong electric radiation.
If the device is installed outdoors, take insect- and moisture-proof measures to avoid circuit board corrosion that can affect monitoring.
Remove the power plug if the device is idle for a long time.
Before unpacking, check whether the fragile sticker is damaged. If the fragile sticker is damaged, contact customer services or sales personnel. The manufacturer shall not be held responsible for any artificial damage of the fragile sticker.
Precautions
Network Video Recorder(NVR)
Quick Start Guide
iv
Issue V1.1 (2016-02-22)
Special Announcement
All complete products sold by the manufacturer are delivered along with nameplates, operation instructions, and accessories after strict inspection. The manufacturer shall not be held responsible for counterfeit products.
This manual may contain misprints, technology information that is not accurate enough, or product function and operation description that is slightly inconsistent with the actual product. The manufacturer will update this manual according to product function enhancement or changes and regularly update the software and hardware described in this manual. Update information will be added to new versions of this manual without prior notice.
This manual is only for reference and does not ensure that the information is totally consistent with the actual product. For consistency, see the actual product.
Network Video Recorder(NVR) Quick Start Guide
Contents
Issue V1.1 (2016-02-22) v
Contents
Precautions .................................................................................................................... i
1 Specifications............................................................................................................ 1
2 NVR Networking ..................................................................................................... 3
3 Hard Disk .................................................................................................................. 5
3.1 Precautions ..................................................................................................................... 5
3.2 Hard Disk Recommendation .......................................................................................... 5
3.3 Video Storage Duration .................................................................................................. 5
3.4 Hard Disk Installation .................................................................................................... 6
4 Operation Instruction............................................................................................ 10
4.1 Front panel ................................................................................................................... 10
4.2 Rear panel...................................................................................................................... 11
4.3 Startup .......................................................................................................................... 12
4.4 Shutdown ..................................................................................................................... 12
5 Quick Setup ............................................................................................................ 14
6 Web Access .............................................................................................................. 20
7 FAQ .......................................................................................................................... 22
A Hazardous Substance Declaration ..................................................................... 23
Network Video Recorder(NVR) Quick Start Guide
1 Specifications
Issue V1.1 (2016-02-22) 1
1 Specifications
System Features
CPU
Professional high-end SOC chip for NVR, dual-core, 930 MHz dominant frequency, ARM CPU.
Operating system
Embedded Linux operating system.
Embedded software
Embedded complete CMS system, complete functions, user-friendly interface, and simple and easy operation.
The unique "quick setup" function enables you to configure and manage the NVR easily.
The unique networking mode of "private network for cameras" implements plug and play access of cameras.
The real-time fault alarm mechanism can timely report faults such as hard disk fault, network fault, and camera disconnection.
The embedded Flash technology implements WebServer and supports real­time monitoring and video playback in a common browser.
Real-time audio and video
Decoding capability
Support H.264 High profile Level5.0 decoding. Video streams of up to 5M pixels can be decoded.
Real-time monitoring
Support 32 channels of real-time video on demand (VOD) at the same time. Support 1/4/6/8/9/16 split-screen video playing window and support video
sequencing playing.
Real-time audio
Audio format: G711_A/G711_U.
Recording
Recording capability
Support recording of a maximum of 32 channels and a maximum of 144 Mbps bit rate.
Support the following resolution: 5M, 3M, 1080P, 720P, and D1. Support multiple recording modes, including 7*24-hour, planned, alarm, and
manual. Support the "video labeling" function. During real-time monitoring, the videos
of emergencies can be labeled.
Hard disk
Support eight 1.5/3.0 Gbps SATA hard disks. The maximum capacity of a
1 Specifications
Network Video Recorder(NVR)
Quick Start Guide
2
Issue V1.1 (2016-02-22)
The data listed in the preceding table is only for your reference. The recording time estimate may be different from the actual recording time. The user shall be liable for any loss incurred as a result thereof.
single hard disk is 4 TB.
Video retention duration
Eight 4TB hard disks are used and 32 videos whose highest total rate is 144 Mbps can be stored for 20 days.
Video playback
Four videos can be played back synchronously. Support video playback based on time axis. The playback time can be
accurately positioned, which is quick and convenient.
Backup
Support backup based on USB drives, portable hard disks, and network disks.
Monitor
Interface
1 VGA output and 1 HDMI output. Single-source display is supported.
Resolution
1024×768, 1280×720, 1920×1080
Network
Interface
2 RJ45 10/100/1000 Mbps adaptive Ethernet ports
Network protocol
RTP/RTCP, TCP/UDP, HTTP, DHCP, DNS, NTP
Others
Ambient temperature
10C to 50C
Ambient humidity
5% to 90%
Power supply
110/220 V AC, 47 to 63 Hz, maximum output power: 200 W
Power consumption
Low power consumption design is used. The maximum power consumption of the motherboard is 15 W (not including USB ports).
Eight 4 TB hard disks increase the power consumption of 80 W.
Dimensions
Chassis: 440 mm×435 mm×89.8 mm (length×width×height)
Weight
The net weight is about 7.805 kg and the gross weight including the packaging material is 9.975 kg.
USB interface
2 USB2.0 host interfaces used separately for backup based on USB and connection of the mouse.
Network Video Recorder(NVR) Quick Start Guide
2 NVR Networking
Issue V1.1 (2016-02-22) 3
2 NVR Networking
The NVR has two network ports, that is, LAN1 and LAN2. Two networking solutions are supported, namely camera private networking mode and free networking mode.
Solution 1: Camera Private Networking Mode
A private network for cameras includes only IP cameras and NVRs and does not include other network devices. The network is especially used to transmit audio and video of NVRs and IP cameras. The private network for cameras must be connected to LAN2 of the NVR and the function of private network for cameras must be enabled on LAN2 (by default, it is enabled upon delivery). For details of the configuration, see quick setup in the NVR User Manual. The NVR can be accessed through LAN1.
After the function of private network for cameras is enabled on LAN2, the NVR will perform the following operation:
Enabling the DHCP service and automatically assigning IP addresses to IP cameras (the DHCP function is enabled on the IP cameras).
Automatically searching for IP cameras in the network.
Automatically adding searched IP cameras and enabling 7*24-hour recording.
Figure 2-1 shows the topology of the private network for cameras. Figure 2-1 Topology of the private network for cameras
Loading...
+ 20 hidden pages