Ganz MDCH-IR3.6N, MDC-IR3.6N User Manual
OUTDOOR IR COLOR CAMERA
MODEL: MDC-IR3.6N / MDCH-IR3.6N
PRODUCT FEATURES
Selection of 420and 540TV resolution and low light performance
surveillance camera with a built-in 1/3 type CCD
Integrated 3.6 mm fixed lens
Outstanding 0 lux performance with built-in 24 LEDs.
Photocell activates IR light at night
Designed for indoor or outdoor use
SAFETY PRECAUTIONS
1. The installation should be made by qualified service engineers and
should conform to all local codes.
2. To prevent fire or electric shock, do not expose the camera to rain or
moisture.
3. To prevent fire or electric shock, UL listed wiring should be used for
the DC 12V input.
4. Use only DC 12V regulated power supply marked class 2.
5. Never attempt to disassemble or modify the camera.
6. Be sure to connect each lead to the appropriate terminal.
Wrong connection may cause damage to the camera.
7. Do not attempt to aim the camera at the sun or ot h er extrem elybright
objects.
8. Do not allow the camera to be subject to unstable location, strong
shocks and vibration, and strong electromagnetic field.
9. If any abnormality occurs, immediately turn off the power and consult
your dealer.
PARTS DESCRIPTION
After un-packing, check if the follo wing items are contained
inside.
¾MDC(H)-IR3.6N unit with Power and BNC Cable…1
¾User Manual… 1
¾Screw…4
¾Mating Power Connector …
¾“L” Wrench ...1
1
INSTALLATION AND ADJUSTMENT
Note: The camera can be mounted on both ceiling and wall.
1. Mount the bottom plate on your desired location by screws. (See Pic. 1)
2. Assemble the Ball camera with middle and base rings to the bottom plate.
3. Set the camera angle by rotating the ball camera.(See Pic.2)
4. Fasten the middle ring and set with “L” wrench to secure the
camera angle.
.(See Pic.2)
Ball camera
Middle Ring
Base Ring
Picture(1) picture(2)
SPECIFICATIONS
LENS SPECIFICATIONS
TV System
Image Sensor
Effective Elements
Minimum Illuminance
Day / Night
White balance
Power consumption
Ambient temperature
Ambient humidity
MDCH-IR3.6NMDC-IR3.6NModel Name
NTSC
2 : 1 InterlaceScanning system
1/3"-Type Interline transfer CCD
755(H) x 582(V)500(H) x 582(V)
15.734kHz(H) x 59.94Hz(V)Scanning Frequency
1.0Vp-p /75ΩVideo output
More than 540 TVLMore than 420 TVLHorizontal resolution
0 Lux (IR LED ON)
Digital
More than 46 dB (at minimum AGC gain)S/N ratio
0.45Gamma characteristic
24 IR LEDsIR Illumination
Internal onlySync. System
1/50 sec. ～1/100K sec.Electronic Shutter
ATW
12V DC±10%Power Supply
2.4 W
Operation : -10°C to +50°C (14deg F to 122 deg F)/ Storage : -20°C to
+60°C (-4 deg F to 140 deg F)
Operation : Max. 85%RH / Storage : Max. 95%RH
Max. aperture ratio
1 : 2.0
3.6mmFocal Length
2.0F No
FixedIris
95.4°D
Angle of view
(Wide to Tele)
74.1°H
54.8°V
The specifications and/or appearance of the product may change without a prior notice
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including
interference that may cause undesired operation.
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a product it means the
product is covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately from the
municipal waste stream via designated collection facilities appointed by the
government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential negative
consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance, please contact your
city office, waste disposal service or the shop where you purchased the product.
IP66IP Rating
External dimensions
Weight
The specifications and/or appearance of the product may change without a prior notice
93mm(W) x 80mm(H)
440g
Loading...