Page 1
INDOOR COLOR CAMERA
MODEL: MDC-3.6N / MDCH-3.6N
PRODUCT FEATURES
1. Selection of 420 and 540TV resolution
2. Integrated 3.6mm fixed lens
3. Easy installation
4. Compact and light weight
SAFETY PRECAUTIONS
1. The installation should be made by
qualif ied service engineers and
should conform to all local codes.
2. To prevent fire or electric shock, do
not expose the camera to rain or
moisture.
3. To prevent fire or electric shock, UL
listed wiring should be used for the
DC 12V input.
4. Use only DC 12V regulated power
supply marked class
5. Never attempt to disassemble or
modify the camera.
6. Be sure to connect each lead to the
appropriate terminal. Wrong
connection may cause damage to the
camera.
7. Do not attempt to aim the camera at
the sun or other extremely bright
objects.
8. Do not allow the camera to be
subject to unstable location, strong
shocks and vibration, and strong
electromagnetic f i eld.
9. If any abnormality occurs,
immediately turn off the power and
consult your dealer.
1
Page 2
PARTS DESCRIPTION
After un-packing, check if the
following items are contained
inside.
¾ MDC(H)-3.6N unit with
Power and BNC Cable…1
¾ User Manual… 1
¾ Screw…4
¾ Plastic Anchors…4
¾ Mating power
connector…1
INSTALLATION
Note: The camera may be
fixed not only on the wall, but
also on the ceiling.
1. Take off the housing(①)
before installation
2. Insert 4 plastic anchors
into the wall or ceiling
(made of concrete) where
the position fit for the
screw hole of the bracket,
then use the Flat Head
Self-Tapping screw(②) to
fix the camera itself.
(Figure 2) Then fasten the
camera holding screw.
3. Fix the housing(①) on the
base, then the installation
is finished.
Figure 1
①
②
Figure 2
2
Page 3
SPECIFICATIONS
A
Model Name MDC-3.6N MDCH-3.6N
TV System NTSC
Scanning system 2 : 1 Interlace
Image Sensor 1/3-Type Interline transfer CCD
Effective Elements 510(H) x 492(V) 752(H) x 582(V)
Scanning Frequency 15.734kHz(H) x 59.94Hz(V)
Video output
1.0Vp-p /75Ω
Horizontal resolution More than 420 TVL More than 540 TVL
Minimum Illuminance 1.6 Lux/F2.0 3.0Lux/F2.0
S/N ratio More than 48 dB (at minimum AGC gain)
Gamma characteristic 0.45
Sync. System Internal only
Electronic Shutter
1/60 sec. ～1/100K sec.
White balance Auto white balance
Power Supply 12V DC±10%
Power consumption 1.2W 1.3W
Ambient temperature Operation : -10°C to +50°C (14deg F to 122 deg F)/Storage : -20°C to +60°C (-4 deg F to 140 deg F)
Ambient humidity(No condensing) Operation : Max. 85%RH / Storage : Max. 95%RH
External dimensions/Weight 97mm(W) x 70mm(H)/135g
Accessories Mating power connector , Screw(4), Plastic Anchors(4)
LENS SPECIFICATIONS
Max. aperture ratio 1 : 2.0 D 95°
Focal Length 3.6mm H 76°
Iris F2.0
※The specifications and/or appearance of the product
may change without a prior notice.
ngle of view
(Wide to Tele)
V 57°
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) This device must accept any
interference received, including interference that may cause
undesired operation.
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a
product it means the product is covered by the European
Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of
separately from the municipal waste stream via designated
collection facilities appointed by the government or the local
authorities.
3. The correct disposal of your old appliance will help prevent
potential negative consequences for the environment and
human health.
4. For more detailed information about disposal of your old
appliance, please contact your city office, waste disposal
service or the shop where you purchased the product.
3
Loading...