How it Works
Ganz
Loading...
LED-17
User Manual
20 pgs930.45 Kb0

Ganz LED-22-1, LED-19, LED-17 User Manual

CCTV Monitor User Manual
Table Of Contents
Information ................................................................................................................................................... 1
Important safeguards .................................................................................................................................. 1
Introduction .................................................................................................................................................. 2
Features ........................................................................................................................................................ 2
Assembling the monitor .............................................................................................................................. 2
Assembling the monitor (17”,19”) ................................................................................................................... 2
Disassembling the monitor ............................................................................................................................. 2
Assembling the monitor (19”W,22”) ............................................................................................................... 2
Disassembling the monitor ............................................................................................................................. 3
Assembling the monitor (24”,27”) ................................................................................................................... 3
Disassembling the monitor ............................................................................................................................. 3
Connections ................................................................................................................................................. 3
Front panel controls .................................................................................................................................... 3
Control panel .................................................................................................................................................. 3
(17”) ............................................................................................................................................................................. 3
(27”) ............................................................................................................................................................................. 3
(19”) ............................................................................................................................................................................. 4
Remote control (27” only) ........................................................................................................................... 5
Inserting batteries into the remote control unit ................................................................................................................. 5
Changing a monitor parameter ...................................................................................................................... 5
Adjustment procedure ................................................................................................................................. 6
OSD function ................................................................................................................................................ 6
VGA menu ..................................................................................................................................................... 6
Lock 8
Cam menu (HDMI) ......................................................................................................................................... 8
Self-diagnosis ............................................................................................................................................ 10
Troubleshooting ......................................................................................................................................... 11
Specifications ............................................................................................................................................. 12
Factory preset timings (VGA mode) ......................................................................................................... 15
Factory preset timings (HDMI mode) ....................................................................................................... 15
User Manual
Information
FCC compliance Class A: This equipment has been tested and
found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
This product was FCC verified under test conditions that included the use of shielded I/O cables and connectors between system components. To be in compliance with FCC regulations, the user must use shielded cables and connectors for all except power cables.
European Union directives 2004/108/EC (EMC directive): This device is in
compliance with the essential requirements and other relevant provisions of Directive 2004/108/EC.
2002/96/EC (WEEE directive): Products marked
with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points.
Important safeguards
1. Installation cautions:
• Do not block any ventilation openings.
• Always ensure that the monitor is located in a well-ventilated area to prevent the unit from overheating.
• Only use accessories specified by the manufacturer or those sold with the product.
• Avoid operating or placing the monitor in the following environments: extremes of temperatures, both hot and cold; high humidity; direct sunlight; excessively dusty surroundings; avoid close proximity to other equipment that generates a strong magnetic field
2. Water and moisture: Do not use this
appliance near water. To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture.
3. Power cord and power cord protection:
Power cords should be routed so that they not likely to be walked on or pinched. Pay particular attention to the location of cords and plugs, convenience receptacles, and the point of exit from the appliance.
4. Product care: Do not touch the screen directly
with fingers. The oils from your skin may leave marks on the surface of the screen, which are difficult to be removed and may damage the screen permanently. Do not apply pressure to the screen.
5. Cleaning: Clean only with a dry cloth.
6. Servicing: Do not attempt to service this unit
yourself. Opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
7. Lightning: For added protection during a
lighting storm or when this unit is left unattended and unused for long periods of time, unplug the unit from the wall outlet and disconnect the cable system. This will prevent damage to the unit due to lightning and power line surges.
8. Mains plug (2 pin/3 pin):
• Do not remove the grounding or earth connection from the power supply / mains plug.
• Always remember to unplug the monitor from the power supply under the following circumstances if the monitor will not be
1
used for a long period of time, if the power supply cable or plug/connector is damaged or if the monitor housing is damaged or broken.
CAUTION: Do not attempt to dismantle this
product. Any attempt to dismantle or remove the covers from this product will invalidate the warranty and may also result in serious injury.
Introduction
This manual explains how to correctly install, operate and get the best performance from your monitor. Please read this user manual carefully before installing your monitor then keep it near your monitor for quick reference.
First, please check that the contents of the box correspond with the following checklist:
• Monitor
• Power cord
• VGA cable
• AC adaptor(only 27”)
The arm of the monitor stand is shipped pre­installed on the monitor.
Assembling the monitor (17”,19”)
1. Put a smooth pad or cloth on a level surface. Place the monitor on it facing downwards.
2. Insert the arm of the monitor stand of the monitor into the pedestal foot provided.
Disassembling the monitor
1. Put a smooth pad or cloth on a level surface. Place the monitor on it facing downwards.
2. Press the groove on the back of protrude connected to the body. Detach the rear cover of the monitor stand with a screw driver.
• User manual
• Remote Control (only 27”)
If any item is missing or damaged, please contact your dealer. Please keep the box and packing materials so that you may properly store or transport your monitor.
Features
The convenient and user-friendly on-screen
display allows for easy and accurate adjustments of screen size, position and color.
The monitor complies with the VESA Display
Data Channel (DDC) specification for Plug and Play compatibility. Advanced micro circuitry makes setup and configuration fast and effortless.
The monitor features Advanced Color Controls
for fine-tuning to meet application requirements. Use the on-screen controls to adjust the color temperature and RGB gain value for the best possible screen color and intensity.
3. Remove the four screws connecting the stand rear body.
4. Remove the connecting stand front body.
Assembling the monitor (19”W,22”)
1. Put a smooth pad or cloth on a level surface. Place the monitor on it facing downwards.
2. Insert the arm of the monitor stand of the monitor into the pedestal foot provided.
Assembling the monitor
The monitors are designed for use on a desktop.
2
Disassembling the monitor
1. Put a smooth pad or cloth on a level surface. Place the monitor on it facing downwards.
2. Detach the rear cover of the monitor stand with a screw driver.
3. Remove the two screws connecting the stand and monitor body.
Screw(x2)
Assembling the monitor (24”,27”)
1. Put a smooth pad or cloth on a level surface. Place the monitor on it facing downwards.
2. Join the stand with the metal protrusion from the bottom of the monitor’s main body.
3. Tighten the screw fully at the bottom of the stand by turning it clockwise three to four turns.
4. After fully tightening the screw, bend the knob of the screw onto the bottom of the stand.
Caution : Incomplete tightening of the screw may
cause the monitor unstable.
Connections
(17”,19”W,19”,22”,24”)
(27”)
1. AC IN(17”,19”W,19”,22”,24”)
DC 12V Input (27”)
2. CAM OUT
Composite signal output
3. CAM IN
Composite signal input.
4. HDMI
HDMI signal input.
5. VGA
RGB signal input.
Disassembling the monitor
1. Put a smooth pad or cloth on a level surface. Place the monitor on it facing downwards.
2. Remove the four screws connecting the stand rear body.
3. Remove the connecting stand front body.
Front panel controls
Control panel
(17”)
(19”W,22”,24”)
(27”)
3
1. MENU
Turns the OSD window on.
Turns the OSD window off and moves from sub
menu to top menu in the OSD window.
*Push the menu button for 5seconds when you
want to unlock the keypad lock.
2. ▲ (Up Arrow)
Primary Function: Select the input source.
Moves cursor to the up in the OSD window and
increases the value of any selected menu.
3. ▼ (Down Arrow)
Moves cursor to the down in the OSD window
and decreases the value of any selected menu.
4. AUTO(*)
Primary Function: Automatically adjusts
the display to the most optimal setting possible.
(VGA mode only)
Secondary Function:Select the sub menu.
5. POWER
Switches the monitor on and off.
*HOT KEY →(*)
(VGA mode only)
Secondary Function: Allows for vertical
scrolling in the OSD menu
6. ▼ (Down Arrow)
Allows for vertical scrolling in the OSD (On­Screen Display) menu
7. SOURCE (*)
Primary Function: Used to select from different
input sources, to confirm selection, press the
source button.
Secondary Function: Select the sub menu.
8. MENU
Turns the OSD window on.
Turns the OSD window off and moves from
sub menu to top menu in the OSD window.
*Pushthemenubuttonfor5secondswhenyouwantto
unlockthekeypadlock.
(19”)
1. POWER
Switches the monitor on and off.
2. ▶ (Right Arrow )
Moves cursor to the right in the OSD window and increases the value of any selected menu
3. ◀ (Left Arrow )
Decreases the value of any selected menu.
4. ▲ (Up Arrow (*))
Primary Function: Automatically adjusts the
display to the most optimal setting possible.
4
Loading...
+ 14 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use