Ganz GWK1 Specsheet
Industrially Hardened
Point-to-Point Wireless Ethernet Kit
GWK1
1IP67HARDENEDINCLUDED 802.3af/at
The Ganz
Ethernet Transmission kit that allows Ethernet data to be transmitted between a
Client remote location and the Access Point or head end. The GWK1 supports up to
95Mbps throughput due to MIMO technology. An easy to read LED array displays unit
operational status along with received signal strength ensuring optimal installation
and operation. The units can be powered by an IEEE 802.3af/at PoE compliant device
or through the supplied power injection module. The GWK1 is FCC certified for use
in North America. Each kit contains two passive power injectors, power supplies and
mounting hardware.
®
GWAVE pre-configured point-to-point industrially hardened wireless
FEATURES
› Lifetime Warranty
› Up to 95Mbps Throughput
› 802.11a/n Compliant
› Distances up to 2 mi
› Powered by the included power injection module or by an
IEEE802.3af PoE compliant device
› Pre-configured Access Point and Client units for quick setup
› Environmentally Hardened -40º to +75ºC
› Meets class IP67 dust and water immersion protection
standards
› Secure transmission: WPA2 – AES or TKIP encryption
› Ganz Antenna alignment feature eases installation and setup
› RF Spectrum Survey Tools
› Antenna Alignment Tools
› LED array displays unit operational status along with received
signal strength
APPLICATIONS
› Simple to deploy and cost-effective alternative to physical
connections to Ethernet edge equipment
› Integration of Ethernet where right-of-way issues mandate
wireless communications
› ITS traffic signalization networks and Video Detection
Systems (VDS)
› ITS roadside and city center CCTV surveillance, and
surveillance of high-value or mission-critical assets
› Wireless communications in manufacturing, petrochemical
refineries, wastewater treatment facilities, and other
industrial automation and control applications operating in
harsh or out-of-plant environments
› Electrical substation video and perimeter surveillance
GWK1
SPECIFICATIONS
Industrially Hardened Point-to-Point
Wireless Ethernet Kit
Wireless Radio
EIRP +4dBm to +26dBm
RF Output +26dBm Rated Transmitter
Operational Frequency 5500GHz - 5825GHz, Region-dependent.
Not all frequencies are supported in all regions.
Contact Ganz for frequencies supported in your
region.
Bandwidths 10, 20, and 40MHz
Wireless Antenna
Antenna Internal 19dBi Dual Polarized Directional
Gain 19dBi
Azimuth 17º Horizontal/Vertical
Elevation 17º Horizontal/Vertical
Connectors
10/100 Ethernet RJ-45, Sealed Cable Gland
Indicating LEDs Power On, Ethernet Link, Signal Strength,
LAN port, Reset
Software Features
Addressing Static IP / DHCP Client / DHCP Server
SNMP V2c
Spanning Tree Protocol support
Telnet Server
Syslog
802.1x Port-Based Network Access Control
NTP Client
User-Configurable Watchdog and Auto-Reboot Mechanism
Multi-Level Configuration and Monitoring Login Accounts
User Configurable Long Range Parameters
Power
Operating Voltage 24VDC @ 140mA
48VDC @ 70mA
Power Consumption 3.5 W
PD Power IEEE802.3af PD compliant
Mechanical
Size (L × W × H) 10.0 × 10.0 × 3.4 in (25.7 × 25.7 × 8.6 cm)
Shipping Weight: < 4lbs/1.8kg
Environmental
MTBF >100,000 hours
Operating Temp -40° C to +75° C
Storage Temp -40° C to +85° C
Relative Humidity 5% to 95%
ORDERING INFORMATION
Part Number Description
GW K1
Included Accessories
Options
Industrially Hardened Point-to-Point Wireless Ethernet Kit, distances up to 2 mi/3.2 km.
Consult Ganz tech support for system designs beyond 2 mi/3.2 km. FCC certified for North America
2 × Power Kit with Power Supply and Passive Power Injector
2 × Mounting Hardware Kit
GWBKT - Articulating Wall Mount Bracket (Sold Separately)
TYPICAL APPLICATION
PC DVR Head End Switch
with 30W PoE+
10/100
Ethernet
PoE
GWK1_AP
(Access Point)
LEGEND
WIRELESS
CAT5
GWK1_CL
(Client)
POWER
ETHERNET
Ethernet Ethernet
PoE
PIM or other
PSE device
Power
IP Camera
All specifications are subject to change without notice.
www.ganzsecurity.com © 2015 CBC AMERICAS Corp. All Rights Reserved. 02/15
Loading...