Ganz GWFE2SCM2, GWFE2SCS2 Specsheet
Commercial Grade 10/100 Mbps Ethernet Media Converter
GWFE2SC(M,S)2
CONVERTER
The Ganz
and receive 10/100 Mbps data over multimode or single mode optical fiber. The
electrical interface will Auto-Negotiate to a 10 Mbps, or 100 Mbps Ethernet rate without
any adjustments. The optical interface operates at a 100 Mbps Ethernet rate. These media
converters are commercial grade for light industrial use.
™
GNET GWFE2SC(M,S)2 Ethernet media converters are designed to transmit
FEATURES
› Commercial Grade
› 10/100 Mbps Ethernet
• 10/100 BASE-T/TX electrical port
• 100 BASE-FX optical port
› Electrical port supports Auto-Negotiation for 10 Mbps or 100
Mbps, full duplex or half duplex data.
› Optical port supports 100 Mbps full duplex data
› Automatic MDI/MDI-X crossover
› Distances up to: 3 km (2 miles) Multimode
30 km (18.6 miles) Single Mode
› Transparent to data encoding/compatible with major data
protocols
› Ambient operating temperature range: 0º – 50ºC
› Voltage transient protection on all power and signal input/output
lines provides protection from power surges and other voltage
transient events.
› No in-field optical adjustments required
› LED Indicators
› IEEE 802.3 compliant
› 5 Year Warranty
APPLICATIONS
› 10/100 Mbps Ethernet Media Converter
› High Speed Computer Links
GWFE2SC(M,S)2
SPECIFICATIONS
Commercial Grade 10/100 Mbps Ethernet Media Converter
Ethernet
Data Interface: Ethernet
Data Rate: 10/100 Mbps
IEEE 802.3 Compliant
Full Duplex or Half Duplex Electrical Port/
Full Duplex Optical Port
Connectors
Optical: SC, 2 Fibers
Power: 2.1mm Center Positive Plug
Electrical: RJ-45
Indicating LEDs - Optical Link/Data Activity
- Electrical Link/Data Activity
- Power
Power
Operating Voltage Range 8 to 24 VDC
Power Consumption 6W
Electrical & Mechanical
Current Protection Automatic Resettable
Solid-State Current Limiters
Circuit Board Meets IPC Standard
Size 4.7 × 3.3 × 1 in (11.9 x 8.5 x 2.6cm)
Shipping Weight <2 lbs./0.9 kg
Environmental
MTBF >100,000 hours
OperatingTemp 0˚Cto+50˚C
StorageTemp -40˚Cto+85˚C
Relative Humidity 0% to 95% (non-condensing)
1
ORDERING INFORMATION
Fibers
Part Number Wavelength Connector
GWFE2SCM2 10/100 Mbps Ethernet (1310 nm) SC 2 Multimode 10dB 3 km (2 mi)
GWFE2SCS2 10/100 Mbps Ethernet (1310 nm) SC 2 Single Mode 15 dB 30 km (18.6 mi)
Included Accessories DC Plug-in Power Supply, 90-264 VAC, 50– 60 Hz (Included)
Required Fiber
Optical Power
Budget Max. Distance
Options [1] Add suffix ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factory)
NOTE: This product requires a fiber installation with a minimum 30 dB connector return loss. The use of Super Polish Connectors is recommended. Complies with FDA
Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J.
TYPICAL APPLICATION
GWFE2SCM2
2 Optical Fibers
GWFE2SCM2
All specifications are subject to change without notice.
EE
CAT-5 CABLE
OPTICAL FIBER
www.ganzsecurity.com © 2015 CBC AMERICAS Corp. All Rights Reserved. 02/15
Loading...