Ganz GNGE4US Specsheet

10/100/1000 Mbps 4 Port Ethernet Unmanaged Switch

GNGE4US

INCLUDED

The Ganz
to transmit and receive 10/100/1000 Mbps data using small form factor pluggable
modules. Both are environmentally hardened to operate in demanding environments. LED
indicators are provided for confirming equipment operating status. Plug-and-play design
ensures ease of installation requiring no optical adjustments. These units may be either
wall or rack-mounted, or may be DIN-rail mounted by the addition of a DIN-rail adaptor
plate.

™

GNET GNGE4US Ethernet 4 port unmanaged switches are designed

HARDENED

FLEXIBILITY

4ALL GIGABIT

FEATURES

› 10/100/1000 Mbps Ethernet

› Environmentally Hardened for use in unconditioned installations

› All ports support 1000 Mbps full duplex data

› Automatic MDI/MDI-X crossover

› Designed to meet full compliance with the environmental

requirements (ambient operating temperature, mechanical
shock, vibration, humidity with condensation, high-line/low-line
voltage conditions and transient voltage protection) of NEMA
TS-1/TS-2 and the Caltrans Specification for Traffic Signal
Control Equipment.

› No In-field optical adjustments required

› Voltage transient protection on all power and signal input/

output lines provides protection from power surges and other
voltage transient events.

› Power and Port status indicating LEDs

› IEEE 802.3 compliant

› Hot-swappable rack modules

› Interchangeable between stand-alone or rack mount use

› Lifetime Warranty

APPLICATIONS

› 10/100/1000 Mbps Gigabit Ethernet

› High Speed Computer Links

* SFP = Small Form-Factor Pluggable Module

GNGE4US

SPECIFICATIONS

10/100/1000 Mbps 4 Port Ethernet Unmanaged Switch

Data

Data Interface Ethernet
Data Rate 10/100/1000 Mbps,

IEEE 802.3 Compliant
Full Duplex or Half Duplex Electrical Ports/Full
Duplex Optical Port

Operating Mode SFP Selectable

Fibers¹ Requires selection of sold-separately SFP

modules. See Ganz data sheet “SFP Small
Form-Factor Pluggable Modules” for number and
description of SFP modules.

Connectors

Optical Requires selection of sold-separately SFP

modules. See Ganz data sheet for number

and description of SFP modules.
Power Terminal Block
Optical LC or SC (depending on SFP module used)

LED Indicators - Optical Link/Data Activity

- Electrical Link/Data Activity

- Power - PoE

Power

Operating Voltage 9 to 24 VDC
Current Draw 17 W max

Electrical & Mechanical

Current Protection Automatic Resettable Solid-State Current
Limiters
Circuit Board Meets IPC Standard
Size 6.1 × 5.3 × 1.1 in (15.5 × 13.5 × 2.8 cm)
Number of Rack Slots 1
Shipping Weight <2 lbs./0.9 kg

Environmental

MTBF >100,000 hours

 OperatingTemp -40˚Cto+75˚C
 StorageTemp - 40˚Cto+85˚C

Relative Humidity 0% to 95% (non-condensing)²

[1] Multimode fiber needs to meet or exceed fiber standard ITU-T G.651. Single mode

fiber needs to meet or exceed fiber standard ITU-T G.652

ORDERING INFORMATION

Part Number Description

GNGE4US 4 Port 1000 Mbps Ethernet Unmanaged Switch

Options DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included)

Small Form-Factor Pluggable Modules (See SFP data sheet)
[2] Add suffix ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factory)
DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT1)

NOTE: This product requires a fiber installation with a minimum 30 dB connector return loss. The use of Super Polish Connectors is recommended.
Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J. In a continuing effort to improve and advance technology, product
specifications are subject to change without notice.

All specifications are subject to change without notice.

www.ganzsecurity.com © 2015 CBC AMERICAS Corp. All Rights Reserved. 02/15