Ganz GNFE1005S2, GNFE1005MAC2-M, GNFE1005M2, GNFE1003MAC2-M, GNFE1005SAC2-M Specsheet
10/100 Mbps Ethernet Electrical To Optical Media Converter
GNFE100(X) Series
INCLUDED CONVERTERHARDENED POWERED
The Ganz
Ethernet electrical to optical media converters. These auto-negotiating devices accept
a 10/100 Mbps electrical input and convert this to a 100 Mbps optical output. This
series of media converters use multimode and single-mode optical fiber and one and
two fiber SC and ST optical connectors. LED indicators confirm operational status. All
models are environmentally hardened with no electrical or optical adjustments (Plug
and Play). Packaged in the exclusive ComNet ComFit housing, the standard size units
may be either wall or rack mounted. Models within the series are also available in a
small size. The units are powered by an included DC power supply.
™
GNET Ethernet GNFE100X media converter series are one-channel
FEATURES
› 10/100 Mbps Ethernet
• 10/100 BASE-T/TX electrical por t
• 100 BASE-FX optical port
› Electrical port supports Auto-Negotiation for 10 Mbps or
100 Mbps, full duplex or half duplex data.
› Optical port supports 100 Mbps full duplex data
› Automatic MDI/MDI-X crossover
› Distances up to: 3 km (2 mi) Multimode
20 km (12 mi) Single Mode
› Transparent to data encoding/compatible with major data
protocols
› Tested and certified by an independent laboratory for full
compliance with the environmental requirements (ambient
operating temperature, mechanical shock, vibration, humidity
with condensation, high-line/low-line voltage conditions
and transient voltage protection) of NEMA TS-1/TS-2 and
CALTRANS Traffic Signal Control Equipment Specifications
› ST or SC optical connectors
› 2 fiber design
› AC/DC powered
› Voltage transient protection on all power and signal input/
output lines provides protection from power surges and
other voltage transient events.
› No in-field optical adjustments required
› LED Indicators
› Standard size is hot-swappable rack module
› Standard size is interchangeable between stand-alone or
rack mount use
› IEEE 802.3 compliant
› Lifetime Warranty
APPLICATIONS
› 10/100 Mbps Ethernet Media Converter
› High Speed Computer Links
GNFE100(X) Series
SPECIFICATIONS
10/100 Mbps Ethernet Electrical To Optical Media Converter
Ethernet
Data Rate 10/100 Mbps
IEEE 802.3 Compliant
Full Duplex or Half Duplex Electrical Port/Full Duplex Optical
Port
Connectors
Optical ST or SC, 2 Fibers
Power Terminal Block
Electrical RJ45
LED Indicators
- Optical Link/Data Activity
- Electrical Link/Data Activity
- Power
Electrical & Mechanical
Current Protection Automatic Resettable Solid-State Current Limiters
Circuit Board Meets IPC Standard
Size (L×W×H) Standard: 6.1 × 5.3 × 1.1 in (15.5 × 13.5 × 2.8 cm)
Mini: 3.3 × 2.5 × 1.1 in (8.4 × 6.4 × 2.8 cm)
Shipping Weight: <2 lbs./0.9 kg
Environmental
MTBF >100,000 hours
OperatingTemp -40˚Cto+75˚C
StorageTemp -40˚Cto+85˚C
Relative Humidity 0% to 95% (non-condensing)
[1] May be extended to humidity with condensation conditions by adding suffix
‘/C’
1
Power
Operating Voltage Range Mini AC: 22 to 27 VAC
Standard: 8 to 24 VDC
Power Consumption Mini AC: 3W
Standard: 6W
ORDERING INFORMATION – Standard Mount DC-Only Media Converter
Optical
Fibers
Part Number Description Connector
GNFE100 5M 2 10/100 Mbps Ethernet 1310nm ST 2 Multimode 10 dB 3 km (2 miles) 1
GNFE100 5S 2 10/100 Mbps Ethernet 1310nm ST 2 Singlemode 15 dB 20 km (12 miles) 1
Accessories
Options
DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included)
Add ‘/C’ for Conformally Coated Circuit Boards (Extra charge, consult factory)
DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT1 or DINBKT4)
Req’d Fiber
Pwr
Budget
Max
Distance
#
Rack
Slots
ORDERING INFORMATION – Mini AC/DC Power Media Converter
Optical
Fibers
Part Number Description Connector
GNFE1003MAC2-M 10/100 Mbps Ethernet 1310nm SC 2 Multimode 10 dB 3 km (2 miles) N/A
GNFE100 5M AC 2- M 10/100 Mbps Ethernet 1310nm ST 2 Multimode 10 dB 3 km (2 miles) N/A
GNFE100 5S AC2- M 10/100 Mbps Ethernet 1310nm ST 2 Singlemode 15 dB 20 km (12 miles) N/A
Accessories
Options
DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included)
Add ‘/C’ for Conformally Coated Circuit Boards (Extra charge, consult factory)
DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT1 or DINBKT4)
Req’d Fiber
Pwr
Budget
Max
Distance
TYPICAL APPLICATION
CAT-5 CABLE
GNFE1002M1A
Optical Fiber
(Fiber count, mode, distance and connector
type are model dependent)
All specifications are subject to change without notice.
GNFE1002M1B
www.ganzsecurity.com © 2015 CBC AMERICAS Corp. All Rights Reserved. 02/15
EE
OPTICAL FIBER
#
Rack
Slots
Loading...