Ethernet Transmission Products
Selection Guide
ganzsecurity.com
Introducing GNET and GWAVE by GANZ
Ethernet Transmission Products for Fiber Optic and Copper Networks
Ethernet Electrical-to-Optical Media Converters
• Electrical Ports Auto-Negotiate Data Rate
• 100 Mbps Optical Output
• Hardened Industrial or Commercial Grade
Ethernet-over-Copper Extenders
Ganz Ethernet-over-Copper Extenders allow you to use your existing cable infrastructure of COAX or UTP as Ethernet media for your next
system renovation.
• Increased Distance – expands transmission distances from 300 feet for traditional UTP to 3000 feet for UTP and 5000 feet for COAX
• Cost-Effective – saves cost of new media and installation labor
• Extends PoE Distances
• Solves Density Challenges; 1, 4, and 16 channel COAX and UTP models.
• Easy installation, just connect and go
Managed & Unmanaged Ethernet Switches
• Up to 10 Port Ethernet Switches
• PoE (Power Over Ethernet): up to 30W of PoE per port
• Hardened Industrial or Commercial Grade
Self-managed Ethernet Switches
The port-configured Ethernet self-managed switches allows you create an Ethernet network with no programming.
• Does not allow IP video to flood the network
• No Software Programming Required, Pre-Programmed for Ease of Installation
• Collect and Forward to Next Ethernet Switch/Network Device
• 4 Models Available
GWave Wireless Ethernet
The GWAVE line consists of an easy pre-packaged Industrially Hardened Point-to-Point kits that contains everything you need to establish
remote connections to Ethernet edge devices.
GWAVE
• Supports up to 95Mbps throughput
• Supports a wide range of Ethernet devices such as megapixel/HD cameras, DVRs, encoders/decoders and web servers.
• Uses WPA2 – AES or TKIP encryption to prevent unauthorized access
• Alignment feature eases installation and setup
• Industrially Hardened links meet class IP67 dust and water ingress protection standards