Ganz CMB712-CS, CMB712-L25, CMB712-L38, CMB712-L60, CMB712-V26A User Manual
...
42mm
42mm
22mm18mm
Digital Day & Night :
True Day & Night :
CMB712-V
DMB712-V
DIMENSION AND CONNECTORS
DAMP(-) DAMP(+) DRIVE(+) GND
MOTOR(+) MOTOR(-)
AD_KEY
GND
EXTRA_VI DEO
OSD SWITCH AND OSD MENU
Use the
Multi Tact Switch within the camerra
Direction and Enter Guide
Enter
Up
RightLeft
Down
2) EXPOSURE
SETUP
LENS DC
EXPOSURE
WHITE BAL ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
SPECIAL
RESET
EXIT
SHUTTER
SHUTTER AUTO
BRIGHTNESS
BRIGHTNESS 000 ~ 255
*darker brighter
DWDR
DWDR OFF
Attention
BRIGHTNESS adjusts
NTSC: 1/60, PAL: 1/50
FLK
1/250 ~1/100,000
ON
000 ~ 063
DC level of the lens
OSD MENU FUNCTION
LENS
EXPOSURE
WHITE BAL
BACKLIGHT
DAY&NIGHT
SPECIAL
RESET
EXIT
SHUTTER BRIGHTNESS AGC DWDR
ATW1 ATW2 AWC -> SET MANUAL
CAM TITLE MOTION PRIVACY IMAGE ADJ
DC MANUAL
OFF BLC HLC
AUTO COLOR B/W EXT
DPC LANGUAGE VERSION
FACTORY
3) WHITE BALANCE
SETUP
LENS DC
EXPOSURE
WHITE BAL ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
SPECIAL
RESET
EXIT
(wider range)
ATW1
(narrower range)
ATW2
AWC->SET
MANUAL
WB MANUAL
INDOOR
OUTDOOR
MANUAL
BLUE
RED
000~255
000~255
6) SPECIAL
SETUP
LENS DC
EXPOSURE
WHITE BAL ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
SPECIAL
RESET
EXIT
MOTION DETECTION
SPECIAL
CAM TITLE ON
MOTION
PRIVACY OFF
IMAGE ADJ.
DPC
LANGUAGE ENGLISH
VERSION 10 10 21
RETURN RET
PRIVACY MASKING
SPECIAL
CAM TITLE ON
MOTION OFF
PRIVACY
IMAGE ADJ.
DPC
LANGUAGE ENGLISH
VERSION 10 10 21
RETURN RET
ON
ON
* SPECIAL SUB MANU LIST
SPECIAL
CAM TITLE ON
MOTION OFF
PRIVACY OFF
IMAGE ADJ.
DPC
LANGUAGE ENGLISH
VERSION 10 10 21
RETURN RET
AREA SEL.
AREA STATE
HEIGHT
WIDTH
LEFT/RIGHT
TOP/BOTTOM
DEGREE
VIEW
AREA SEL.
AREA STATE
HEIGHT
WIDTH
LEFT/RIGHT
TOP/BOTTOM
COLOR
AREA 1~ AREA 4
AREA 1~ AREA 8
Attention
* CAMERA TITLE
OFF
ON
ON
* DEAD PIXEL
COMPENSATION
中文
* UPDATE VERSION
ON OFF
000 ~ 013
000 ~ 013
000 ~ 011
000 ~ 011
000 ~ 255
ON OFF
ON OFF
000 ~108
000 ~180
000 ~167
000 ~092
000 ~015
When select ON,
AREA 1 always turns on
-. 1/3” SONY Super HAD-II CCD -. True or Digital Day & Night
-. Digital WDR(Wide Dynamic Range)
-. Back Light Compensation
-. High Light Compensation -. Motion Detection
-. Privacy Masking
-. Lens Shading Compensation
-. 2D Digital Noise Reduction (2DNR)
-. Low Power Consumption
-. Multi Tact Switch for OSD control
TV System
Scanning System
Image Sensor
Effective Elements
Scanning Frequency
Video Output
Horizontal Resolution
Minimum Ilumination(F1.4)
Day/Night
S/N Ratio
Gamma Characteristic
Sync. System
Electronic Shutter
White Balance
Power Supply
Power Consumption
Ambient Temperature
Ambient Humidity
Switches
1/3” Type Inter line transfer CCD(Sony HAD II CCD)
768(H) x 494(V)
15.734kHz(H) x 59.94Hz(V)
More than 50dB(at minimum AGC gain)
1/60 sec, FLK, 1/60 ~1/100,000(Selectable) 1/50 sec, FLK, 1/50 ~1/100,000(Selectable)
ATW1, ATW2, AWC, Mannal (Selectable)
Operation :
Operation : Max. 85%RH / Storage : Max. 95%RH
※The specifications and/or appearance of the product may change without a prior notice
2 : 1 Interlace
752(H) x 582(V)
15.625kHz(H) x 50.00Hz(V)
1.0Vp-p/75Ω
More than 600 TVL
D-DN:0.4lx T-DN:0.04lx
Digital or True Day/ Night
0.45
Internal only
DC12V±10%
1.1 Watt
-10°C to +50°C / Storage : -20°C to +60°C
Multi Tact Switch for OSD control
* START SET UP MENU
Press the Middle
Multi Tact Switch,
the main setup menu is displayed on the monitor screen
SETUP
Select the function
by using the switch
Up
Down
PALNTSC
LENS DC
EXPOSURE
WHITE BAL ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
SPECIAL
RESET
EXIT
* A function with the icon
has sub menus.
To select a sub menu,
select a function with
the icon and press
the switch
Enter
4) BACKLIGHT
SETUP
LENS DC
EXPOSURE
WHITE BAL ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
SPECIAL
RESET
EXIT
BLC
HLC
Attention
AREA SEL.
AREA STATE
GAIN
HEIGHT
WIDTH
LEFT/RIGHT
TOP/BOTTOM
LEVEL
MODE
When select BLC,
AREA 1 AREA 2
ON
OFF
000~255
000~010
000~009
000~011
000~010
000~255
ALL DAY NIGHT ONLY
IMAGE ADJUST
SPECIAL
CAM TITLE ON
MOTION
PRIVACY OFF
IMAGE ADJ.
DPC
LANGUAGE ENGLISH
VERSION 10 10 21
RETURN RET
LENS SHAD.
ON
2DNR
FONT COLOR
CONTRAST
SHARPNESS
DISPLAY
NEG. IMAGE
* LENS SHAD : LENS SHADING COMPENSATION
* 2 DNR : DIGITAL NOISE REDUCTION(2D)
* NEG IMAGE : NEGATIVE IMAGE
OFF ON
ON OFF
ON OFFMIRROR
000~255
000~031
CRT
ON OFF
000 ~ 255
RETURN
FONT
ID&TITLE
LCD
USER
000 ~ 255
000 ~ 255
* GAMMA
* PED LEVEL
* COLOR GAIN
AREA 1 always turns on
1) LENS
Turn the Switch toward Left or Right side, Select DC or MANUAL
* Simply make the adjustment
in the following order to help
make the focusing easier:
- Select MANUAL
- Adjust lens focus well
- Then return to DC
SETUP
LENS DC
EXPOSURE
WHITE BAL ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
SPECIAL
RESET
EXIT
SETUP
Left
MANUAL
Right
5) DAY&NIGHT
SETUP
LENS DC
EXPOSURE
WHITE BAL ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
SPECIAL
RESET
EXIT
AUTO
WARNING
COLOR
BW
EXT
D->N LEVEL
D->N DELAY
N->D LEVEL
N->D DELAY
Do not change
the above factory-set levels
BURST
IR SMART
IR LEVEL
HIGH LOW
IR GAIN
HEIGHT
WIDTH
LEFT/RIGHT
TOP/BOTTOM
*DDN *TDN
040~224 140~224
1 SEC~
1 SEC~
60SEC
60SEC
000~255
000~008
000~013
000~005
000~009
000~184 000~084
ON OFF
OFF ON
7) RESET & EXIT
SETUP
LENS DC
EXPOSURE
WHITE BAL ATW1
BACKLIGHT OFF
DAY&NIGHT AUTO
SPECIAL
RESET
EXIT
FACTORY RESSET
CBC Co.,Ltd
Tokyo, Japan
www.GANZ.jp
Loading...