Gamut PHI3, PHI7, PHI-LCR Product information

Series

LCR

Product information

It is with great pride we introduce the new
GamuT Phi Series.

The Phi series is based on the technologies that were develo­ped for the GamuT L-series loudspeakers with a few new
ideas and solutions added.

The Phi3, Phi5, Phi7, Phi-LcR and the upcoming Phi Sub all
use exclusive and proprietary technologies developed by
GamuT to establish a new standard for audio performance in
their price range.

Driver Technology:

For the Phi series a completely new range of bass and treble
drive units has been designed that optimize the dynamic ac­curacy, increase the resolution of details, and minimize/control
resonances.

Tweeter Details:

- Optimized directivity wave guide in stainless steel

- Die cast front plate for reduced resonance, and optimized

acoustic coupling

- Optimized low distortion magnet system

Woofer Details:

- New long throw low loss suspension, for more bass output

and better dynamics

- Wood fibre cone material for optimal resonance control

- Optimized machined centre wave guide for higher transpa-

rency and lower coloration

- Dynamic stability magnet system with low distortion mag

netic pole design and aluminium ring inserts for optimum
dynamic stability.

-

Crossover Technology:

A proprietary NRLi crossover technology is used for all
models to assure unsurpassed transparency, dynamic contrast
and the most accurate 3D-imaging possible.

The 3-way Phi5 and Phi7 use our breakthrough DC coupled
Midrange network design in combination with our Acoustic
Coupled Driver technology for increased bass output and
extreme transparency.

Acoustic technology:

As in all GamuT speakers, a special and unique acoustic dam­ping material placement is used to ensure optimum dynamic
accuracy and detailing, the lowest possible acoustic resonance
and maximum internal acoustic control.

The Phi series are were designed for the ultimate result in
reproduction accuracy. This requires that the mechanical and
electrical parameters of the drivers are perfectly optimized to
the acoustic volume and that the trimming of the reflex port
openings is no less than perfect to obtain the best possible
impulse response.

Design & Cabinetry:

Besides their beautiful appearance the Phi’s cabinets are desig­ned for optimum resonance control and quality. This is achie­ved by using high quality real wood veneer on high pressure
MDF, multiple internal bracings and an external Resonance
Control Groove, which combined keeps the coloration from
the cabinet at a minimum. Another important new design fea­ture is the “Auto Aligning Feet” that assures optimum control
and coupling to the surrounding elements.