Gamma Ballhopper Rollerhopper 150 User Manual

PACKAGE CONTENTS

1 - Ballhopper Rollerhopper 150

Ballhopper® Rollerhopper™ 150

HANDLE ASSEMBL Y

Step 1: Grab the ring of the Handle Block Pin, pull away from the Handle/Leg, turn 90 degrees and release the ring into the groove that holds the pin in the out locked position. Repeat for the other side.

BALL PICK UP

Step 2: Insert Handle/Leg into the Yoke, pull the Handle Block Pin ring away from the Handle, turn 90 degrees and release the pin until it locks into the Yoke. Repeat for the other side.

NOTE: To remove the Handle/Leg for transport or storage, reverse Steps 1 and 2.

Step 1: Make sure the Yoke Spring Pin is disengaged from the Wheel hole.

Step 2: Push the Rollerhopper forward over loose tennis balls.

Updated 03.29.12Made in Taiwan

STANDING THE ROLLERHOPPER

Ballhopper® Rollerhopper™ 150

Step 1: Release the Leg Clip from the Handle/Leg.

LOCKING THE WHEEL

FEEDING AND CARTS

Step 2: Move the Legs outward and snap the Leg Clip into position between the two Handles/Legs.

Step 3: When Handles/Legs are locked in the open position, lift the Rollerhopper into a standing position by the Yoke.

NOTE: Before opening the Wheel to feed or dump balls, be sure to engage the Yoke Spring Pins into the holes on each side of the Wheel.

IMPORTANT: When engaging the Yoke Spring Pins into the Wheel holes, be sure to align the holes with the pins BEFORE engaging. Do not spin the Wheel until the pins clicks into position. This will cause damage to the Wheel over time that is not covered by the warranty.

Feed tennis balls directly from the Rollerhopper 150.

Dump tennis balls into a Ballhopper teaching cart.

LIMITED ONE-YEAR WARRANTY

GAMMA SPORTS (”GAMMA”) warrants to the original purchaser that the BALLHOPPER Pickup (”EQUIPMENT”) purchased is free from defects in materials and workmanship for a period of ONE (1) year from the date of original purchase. Should any defects develop under normal use within the specified time period, GAMMA will, at its option, repair or replace the defective EQUIPMENT provided it is returned to GAMMA prepaid at the purchaser’s expense. This warranty does not apply to any damage or defect caused by negligence, abuse, misuse, unauthorized alteration, shipping, handling, or wear and tear as a result of normal use.

GAMMA’s obligation under this warranty is limited to replacement or repair of the defective EQUIPMENT, and no one is authorized to promise any other liability. GAMMA shall, in no event be liable for any incidental or consequential damages. This warrranty gives you specific legal rights and you may also have other rights which vary from state-to-state.

To return defective EQUIPMENT, a return authorization (RA#) must be obtained from a GAMMA customer service representative by calling 1-800-333-0337. The RA# must be clearly marked on the outside of the shipping carton being returned. All returns must be shipped prepaid by the customer to GAMMA. Please retain the original shipping carton and packing materials for any future shipments. GAMMA will not be responsible for EQUIPMENT which is not returned in the original undamaged packaging.

Updated 03.29.12Made in Taiwan

+ 1 hidden pages

Gamma Ballhopper Rollerhopper 150 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual