Gamber-Johnson 7170-0217 User Manual

INSTALLATION INSTRUCTIONS

Product Revision

7170-0217

Rev.C

Form

INST-634

KIT - TABLET DISPLAY MOUNT, CLEVIS,
6" LOCKING SLIDE ARM, KEYBOARD TRAY

7170-0217-01

KIT - TALL TABLET DISPLAY MOUNT, CLEVIS,
6" LOCKING SLIDE ARM, KEYBOARD TRAY

Printing Spec:

Assemble 7170-0217 and 7170-0217-01 Kit components as shown below.
Refer to the instruction sheet supplied with each component for details specific
to the component.

7160-0498
KEYBOARD TRAY
(INST-521)

4X .25 FLAT WASHER

.38-16 NYLOK NUT

4X .25-20 NYLOK NUT

7110-1008

STEEL BACKUP PLATE

CLEVIS

PS-001

NYLON BEARING

7160-0494
TABLET
DISPLAY MOUNT
(INST-606)
or
7160-0529
TALL TABLET
DISPLAY MOUNT
(INST-620)

7160-0514
6" LOCKING
SLIDE ARM

NYLON BEARING

(INST-602)

APPLY RED TREADLOCKER

SUPPLIED w/ 7160-514

TO STUD

Product Mounting Disclaimer

Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage

Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson

of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is

products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications

required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

© Copyright 2014 Gamber-Johnson, LLC

If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868