Gamber-Johnson 7160-0995 User Manual

INSTALLATION INSTRUCTIONS

Product Date Form #

ARMREST PRINTER MOUNT - PENTAX POCKETJET

7160-0006, 7110-0995

The 7160-0006 & 7110-0995 Armrest Printer Mounts for Pentax Pocketjet printe rs
are typically mounted on a Top Plate installed between the driver and passenger seats.

The hardware bag supplied with the 7160-0006 mount includes bolts, washers and nuts
to attach the printer mount as shown below.

The height of the Armrest can be adjusted by tilting the upper portion of the mount back
and loosening the bolt which runs down the center of the pole. Position the Armrest at
the required height and re-tighten the bolt.

The Pentax Pocketjet Printer is installed by removing the Retainer Bracket and sliding
the printer into the mount. Re-attach the Retainer Bracket to hold the printer in place.
Connect power and data cables to the printer and secure them with cable ties.

Rev. B

INST-317

Paper Rolls are installed into the Printer mount by releasing the latch and o pening the
Armrest/Cover. Place the paper roll on the nylon rod and feed into the printer per the
instructions supplied with the printer. Close and latch the Armrest/Cover to protect the
paper.

ARMREST/COVER

LATCH

RETAINER BRACKET

.25-20 NYLOK NUT
.25 FLAT WASHER

.38 FLAT WASHER

TOP PLATE

.25-20 x 1.00
CARRIAGE BOLT

Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

© copyright 2011 Gamber -Johnson, LLC

If y ou need assistance or have questions, call Gambe r-Johnson at 1-800-456-6868