Gamber-Johnson 7160-0568-xx User Manual

INSTALLATION INSTRUCTIONS

Product

7160-0568

GETAC V110 CRADLE

Revision

Rev.A

Form

INST-645

Printing Spec:

PS-001

This instruction sheet is for the V110 cradle only. For instructions on features, set­up, and operation of the V110 computer, please refer to the manual provided by
Getac with the computer.

This cradle is designed to be used with a variety of Gamber-Johnson mounting
systems. Installation instructions for other Gamber-Johnson products are provided
with each individual product.

This instruction sheet is for the following products:

Item No. 7160-0568-XX Cradle - Getac - V110

Product Mounting Disclaimer

Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage

Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson

of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is

products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications

required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868

page 1/3

V110 CRADLE FEATURE IDENTIFICATON

Screen Support

Lock Button

Front Hooks

Rear Hooks

Stylus Holder

Latch

Guide Blocks

Bumpers

Deck

4X 1/4-20unc x .62"
mounting studs

2X 6-32unc inserts­Screen Support
mounting position
(on right and left)

page 2/3