Gamber-Johnson 7160-0561 User Manual

INSTALLATION INSTRUCTIONS

Product

7160-0561

FORKLIFT - 2" & 3" TUBE CLAMP

Revision Form

Rev.A

Printing Spec:

INST-640

PS-001

7160-0561 Tube Clamp can be used on 2" or 3" diameter tubes.
Assemble 7160-0561components as shown below.
Clamshell maybe placed in a horizontal or vertical position per application.
(4) Spacers and 2.75" long bolts are used when mounting on 3" tube.
Spacers are not required and 1.00" long bolts are used when mounting on 2" tube.

Clamp Bracket

3/8-16 Nuts,

(4) Spacers used with 3" Tube,
Spacers not required with 2" Tube

Clamp Bracket

Lock Washers &

Flat Washers

Clamshell

2" or 3"

Diameter

Tube

(6) 3/8-16 x 2.75" Bolts and Washers
used with 3" Tube
(6) 3/8-16 x 1.00" Bolts and Washers
used with 2" Tube

Product Mounting Disclaimer

Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage

Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installa tion or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson

of any nature arising directly or indirectly as a result of the improper installa tion or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the loc ation of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is

products full consideration of vehicle occupants, vehicle systems (i.e., the loc ation of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications

required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

© Copyright 2014 Gamber-Johnson, LLC

If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868