INSTALLATION INSTRUCTIONS
Product Revision Form
7160-0548
Rev.A
CONSOLE BOX - CHEVY TAHOE 2015+
Printing Spec:
This instruction sheet is for following products:
Item No. 7160-0548-00 2015 Chevy Tahoe Console Box only
Item No. 7160-0548-01 2015 Chevy Tahoe Console Box with Cupholder and Armrest
Item No. 7160-0548-02 2015 Chevy Tahoe Console Box with Wire Chase
Item No. 7160-0548-03 2015 Chevy Tahoe Console Box with Wire Chase, Cupholder
and Armrest
NOTE: This console box also works for the Chevy Silverado and Suburban (2015) &
Chevy 1500 (2014)
ARMREST
INST-642
PS-001
TOP PLATECUPHOLDER
CONSOLE BOX
LEG
(PASSENGER SIDE)
WIRECHASE ASSEMBLY
FIGURE 1: 7160-0548-03: CONSOLE BOX WITH WIRE CHASE, CUPHOLDER AND ARMREST
Product Mounting Disclaimer
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installa tion or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
of any nature arising directly or indirectly as a result of the improper installa tion or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the loc ation of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
products full consideration of vehicle occupants, vehicle systems (i.e., the loc ation of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
© Copyright 2014 Gamber-J ohns on , LLC
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
WARNING
You must read and follow all of these installation instructions. Failure to follow all of these
•
installation instructions may result in seriuos bodily injury or death.
Keep these installation instructions with the product and readily available in the vehicle for future
•
reference of other users of the product.
Additional copies of the installation instructions can be obtained from Gamber Johnson.
•
If you need assistance or have any questions, call Gamber-Johnson at 1-800-456-6868.
•
Do not remove warning label from product under any circumstances.
•
Before installation of any equipment always check area for routing of wires / cables and if
•
drilling is required check area where drilling above and below the drilling area.
High speed vehicle turns may cause a motion attachment product to swivel, interfering with the
•
driver or other equipment.
The Vehicle Base, Upper Pole, Motion Attachment and Dock or Cradle should not be positioned
•
in the area where the airbag will be deployed if it is activated. DO NOT postion the equipment in
front of an airbag. Equipment positioned in front of an airbag can cause serious injury or death if
and airbag was activated, such as in an accident.
The installer and user of this product(s) are responsible for installing and using Upper Pole,
•
Motion Attachment and Dock or Cradle assemblies outside the airbag deployment zone. (See
Product Mounting Disclaimer Below)
If installation of the equipment requires that the equipment be placed in front of an airbag,
•
deactivate the airbag in the vehicle so it cannot be activated in and accident. In order to secure
permission for deactivating the airbag in these circumstances, contact the National Highway Traffic
Safety Administration at 1-800-424-9393 to gain permission to do so. If you have any questions or
need assistance, call Gamber Johnson at 1-800-456-6868.
Product Mounting Disclaimer
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installa tion or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
of any nature arising directly or indirectly as a result of the improper installa tion or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the loc ation of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
products full consideration of vehicle occupants, vehicle systems (i.e., the loc ation of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
© Copyright 2014 Gamber-J ohns on, LLC
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
TOOLS NEEDED:
Phillips Screw Driver 1.
#10 Allen2.
M10 Socket/Wrench 3.
3/8 Socket/Wrench4.
INSTALLATION INSTRUCTIONS:
If the vehicle comes with a center console or center seat, remove it by removing the 1.
four M10 bolts on the transmission hump. (Save the hardware for step 2)
2. Secure the Legs to the transmission hump using the M10 hardware from Step 1. If there
is no center seat/console, the holes are generally plugged. Use M10 hardware provided in
the hardware bag.
NOTE : Letter "D" on one of the legs indicate it secures to the driver side; side with letter "D"
towards front. See Figure 2.
3. Place the console box on top of the legs and slide it to desired position. Secure the
console box to the leg kit using the 3/8 hardware provided
4. Attach the accessories, such as Wire Chase, Armrest, Storage Box etc., to the
Console Box using the hardware provided with them.
BACK PLATE
FRONT PLATE
A
DETAIL A
LETTER "D" ON
LEG (DRIVER SIDE)
LEG
(DRIVER SIDE)
WIRE CHASE
FIGURE 2
Product Mounting Disclaimer
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installa tion or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
of any nature arising directly or indirectly as a result of the improper installa tion or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the loc ation of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
products full consideration of vehicle occupants, vehicle systems (i.e., the loc ation of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
© Copyright 2014 Gamber -Johnson, LLC
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
Notes:
The Front Plate of the Console Box has hole patterns to mount accessories such as 13792,
7160-0110 and 7160-0313; See Figure 2; Hardware is not provided.
Accessories such as External Cupholder and Exterior Armrest could be attached the
Back Plate of Console Box; Hardware provided with the accessories.
ACCESSORIES:
Following are the accessories that works with this console box and could be ordered
seperately:
15250 - FACEPLATE - AUX/USB/SD CARD READER (see picture below)
7110-1013 - DRIVER SIDE ARMREST
7110-1012 - PASSENGER SIDE ARMREST
7160-0429 - EXTERIOR ARMREST
7110-1024 - WIRE CHASE ASSEMBLY (see picture below)
MCS-INTCUP - INTERNAL CU HOLDER
MCS-CUP2 - ADJUSTABLE CUPHOLDER (DOUBLE)
MCS-CUPHOLD2 - UNIVERSAL HEAVY-DUTY CUPHOLDER
7160-0464 - STORAGE POCKET (see picture below)
7110-1024: Wire Chase Assembly
7160-0464: Storage Pocket
15250: Faceplate - AUX/USB/SD Card Reader
Product Mounting Disclaimer
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installa tion or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
of any nature arising directly or indirectly as a result of the improper installa tion or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the loc ation of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
products full consideration of vehicle occupants, vehicle systems (i.e., the loc ation of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
© Copyright 2014 Gamber -Johnson, LLC
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
Loading...