Gamber-Johnson 7160-0543-xx User Manual

INSTALLATION INSTRUCTIONS

Product Form

7160-0543-XX

FZ-M1 CRADLE

Revision

Rev .A

INST-643

Printing Spec:

PS-001

This instruction sheet is for the FZ-M1 cradle only. For instructions on features, set­up, and operation of the FZ-M1 computer, please refer to the manual provided
by Panasonic with the computer.

This cradle is designed to be used with a variety of Gamber-Johnson mounting
systems. Installation instructions for other Gamber-Johnson products are provided
with each individual product.

This instruction sheet is for the following products:

Item No. 7160-0543-00(-E) Cradle, No RF

Product Mounting Disclaimer

Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage

Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson

of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is

products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications

required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

© Copyright 2012 Gamber-Johnson, LLC

If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868

FZ-M1 CRADLE FEATURE IDENTIFICATON

Key lockable
Wing Turn Latch

Top Hooks

Slide Plate

Base

Stylus Holder

1/4-20unc Threaded Inserts
(GJ Hole Pattern and
Vesa 75mm Hole Pattern)