Page 1
INSTALLATION INSTRUCTIONS
Product Revision
7160-0536
Base, Ford - Transit Connect 2014+
(no drill)
L-BRACKET
Rev.B
Form
INST-627
Printing Spec:
BASE
PS-001
PARTS LIST
PART NO.
15133
15134
7120-0627
10040-0001 3/8 - 16 X 1.00 Hex Head Bolt
3130-0052
••
DESCRIPTION
Base, Ford - Transit Connect 2014+
L-Bracket- Base, Ford - Transit Connect 2014+ 1
Hardware Bag
••
3/8 Washer
QUANTITY
1
1
7•
7•
3130-0424• 3/8 split lock washer •7•
TOOLS NEEDED
T-50 BIT
Product Mounting Disclaimer
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installa tion or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
of any nature arising directly or indirectly as a result of the improper installa tion or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the loc ation of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
products full consideration of vehicle occupants, vehicle systems (i.e., the loc ation of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
© Copyright 2014 Gamber-J ohns on , LLC
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
Page 2
WARNING
You must read and follow all of these installation instructions. Failure to follow all of these
•
installation instructions may result in seriuos bodily injury or death.
Keep these installation instructions with the product and readily available in the vehicle for future
•
reference of other users of the product.
Additional copies of the installation instructions can be obtained from Gamber Johnson.
•
If you need assistance or have any questions, call Gamber-Johnson at 1-800-456-6868.
•
Do not remove warning label from product under any circumstances.
•
Before installation of any equipment always check area for routing of wires / cables and if
•
drilling is required check area where drilling above and below the drilling area.
High speed vehicle turns may cause a motion attachment product to swivel, interfering with the
•
driver or other equipment.
The Vehicle Base, Upper Pole, Motion Attachment and Dock or Cradle should not be positioned
•
in the area where the airbag will be deployed if it is activated. DO NOT postion the equipment in
front of an airbag. Equipment positioned in front of an airbag can cause serious injury or death if
and airbag was activated, such as in an accident.
The installer and user of this product(s) are responsible for installing and using Upper Pole,
•
Motion Attachment and Dock or Cradle assemblies outside the airbag deployment zone. (See
Product Mounting Disclaimer Below)
If installation of the equipment requires that the equipment be placed in front of an airbag,
•
deactivate the airbag in the vehicle so it cannot be activated in and accident. In order to secure
permission for deactivating the airbag in these circumstances, contact the National Highway Traffic
Safety Administration at 1-800-424-9393 to gain permission to do so. If you have any questions or
need assistance, call Gamber Johnson at 1-800-456-6868.
Product Mounting Disclaimer
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installa tion or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
of any nature arising directly or indirectly as a result of the improper installa tion or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the loc ation of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
products full consideration of vehicle occupants, vehicle systems (i.e., the loc ation of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
© Copyright 2014 Gamber-J ohns on, LLC
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
Page 3
INSTALLATION INSTRUCTIONS:
Remove the two front seat bolts with a T-50 bit. See Figure 1.1.
Slide the base between the seat mounts and the floor. See Figure 22.
Put the seat bolts back but do not completely tighten them (this would allow some3.
flexibility/movement for completing the installation of the base).
With a hex head bolt and washer provided, through the slot in the top of base, attach 4.
the L-bracket to the base. Again do not completely tighten the bolt. See Figure 3.
Now, allign the holes of the L-bracket with the rectangular holes of the seat mount and 5.
the base pems. Bolt the remaining hardware through these holes and tighten them
completely. See Figure 1 and Figure 3.
Tighten the hex head bolt on the top and finally tighten the seat bolts. 6.
The base is now ready to install the lower pole, upper pole and motion attachments7.
etc. See Figure 2.
Use the remaining hardware to install a pole to the base.8.
Figure 2
Figure 3Figure 1
Notes:
1. Installing the vehicle base might result in reducing the passenger seat travel.
Product Mounting Disclaimer
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installa tion or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
of any nature arising directly or indirectly as a result of the improper installa tion or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the loc ation of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
products full consideration of vehicle occupants, vehicle systems (i.e., the loc ation of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
© Copyright 2014 Gamber -Johnson, LLC
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
Loading...