Gamber-Johnson 7160-0492-xx User Manual

INSTALLATION INSTRUCTIONS

Product Form

7160-0492, 7160-0492-01, 7160-0492-02, 7160-0492-03

INSTRUCTION SHEET - TABCRUZER II CRADLE

This device is a cradle for your iPad
Series

® case (GJ Part number 14830). It is designed for use with OEM or

3rd gen) or iPad 2 in an OtterBox® Defender

®(

Revision

Rev.A

INST-598

Printing Spec:

PS-001

aftermarket cables (not provided).

Slide

Lock Button

Mounting Holes

Strain Relief

WARNING

- You must read and follow all of these installation instructions. Failure to follow the installation instructions may result in serious bodily
injury or death.

- Do not install or use the TabCruzer in the area in which the airbag on the vehicle may be deployed. The installer and user of the
TabCruzer are responsible for installing and using this device outside the area in which an airbag may be deployed.

- Abide by all state and federal laws when mounting and using this device. Do not use this device while operating a motor vehicle.

- Keep these instructions with the product and readily available in the vehicle for future reference of other users of the product.

- Warranted to be free from defects in materials and workmanship for one year. See www.tabcruzer/warranty for more information.

Product Mounting Disclaimer

Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage

Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installa tion or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson

of any nature arising directly or indirectly as a result of the improper installa tion or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the loc ation of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is

products full consideration of vehicle occupants, vehicle systems (i.e., the loc ation of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications

required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

©Copyright2013Gamber‐Johnson,LLC

If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868

Installation:

Install the TabCruzer using the supplied hardware to a mount per the instructions 1.
provided with the mount.

If desired, route and restrain your cables using the provided cable ties.2.
Install your iPad into the OtterBox Defender series case per the instructions included with 3.

the case.

USE:

Fully depress the Lock Button to open the TabCruzer1.
Slide your iPad into the TabCruzer2.
Press down on the Slide of the TabCruzer until a click is heard. Lock with key if desired.3.
A cable can be connected to your iPad before or after docking.4.