Gamber-Johnson 7160-0490 User Manual

INSTALLATION INSTRUCTIONS

Product Revision

7160-0489, 7160-0490

FZ-G1 CRADLE

Rev .A

Printing Spec:

Form

INST-604

PS-001

This instruction sheet is for the FZ-G1 cradle only. For instructions on features, set­up, and operation of the FZ-G1 computer, please refer to the manual provided
by Panasonic with the computer.

This cradle is designed to be used with a variety of Gamber-Johnson mounting
systems. Installation instructions for other Gamber-Johnson products are provided
with each individual product.

This instruction sheet is for the following products:

Item No. 7160-0489-00 Keyed alike, No RF
Item No. 7160-0489-03 Keyed different, No RF

Item No. 7160-0490-00 Keyed alike, No RF
Item No. 7160-0490-03 Keyed different, No RF

Product Mounting Disclaimer

Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage

Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson

of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is

products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications

required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

© Copyright 2012 Gamber-Johnson, LLC

If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868

CF-53 DOCKING STATION FEATURE IDENTIFICATON

Button Latch

Top Hooks

Slide Plate

(Keyed alike,
or Keyed different)

Base

Alignment Tabs

Guide Block
(Can be removed for
use with FZ-G1 that has
an extended battery or
card slot attachment)

4X Mounting Studs
(1/4-20unc for model 7160-0486)
(M6-1.0 for model 7160-0490)