Gamber-Johnson 7160-0473-00 User Manual

INSTALLATION INSTRUCTIONS

Product Revision

7160-0473-00, 00-E, -03, 03-E
INSTRUCTION SHEET - JT-B1 CRADLE

This device is a cradle for the Panasonic JT-B1 Toughpad.

Instalation:

Open the cradle and mount the cradle using the provided M4 hardware. Note: The 1.
mounting pattern is 75mm VESA.

The tablet hand strap should be installed so the "bump" is opposite the docking 2.
connector on computer.

The tablet requires 5 Vdc input. Recommend power supply made by Lind Electronics, 3.
Part # PA0520-3812 for this cradle.

Use:

Open the cradle by fully depressing the Lock Button.1.

Insert the tablet into the cradle so that the docking connector on the computer is 2.
facing up. Note: The text on the tablet will be on the left hand side.

Rev. C

Form

INST-597

Printing Spec:

PS-001

Depress the Slide of the dock until the lock engages and a click is heard.3.

Tablet power cable (not provided) can be strain reliefed using the provided cable ties 4.
and the strain relief points on the back of the cradle.

Lock Button

Slide

Gamber-Johnson LLC
3001 Borham Ave.
Stevens Point, WI 54481
USA
715-344-3482

Product Mounting Disclaimer

Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage

Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson

of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is

products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications

required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

© Copyright 2013 Gamber-Johnson, LLC

If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868