Gamber-Johnson 7160-0454 User Manual
INSTALLATION INSTRUCTIONS
Product Revision Form
7160-0454
Rev.C
INST-586
Universal Adapter
Printing Spec:
PS-001
The Universal Adapter is a mount designed to attach Gamber-Johnson docking stations
and cradles to competitor products.
Installing the mount
1. Attach one adapter plate to the competitor equipment with hardware supplied
with the competitor equipment. See page 2 for competitor hole patterns.
2. Attach one adapter plate to the Gamber-Johnson equipment with the hardware
supplied with the Gamber-Johnson equipment or with the 1/4-20 hardware provided
with the Universal Adapter.
3. Attach the two adapter brackets together as shown below with the 1/4-20 washer
head bolts supplied in hardware bag 7120-0596.
4x 1/4-20 x 5/8
Hex Washer
Head Bolt
Product Mounting Disclaimer
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
© Copyright 2012 Gamber-Johnson, LLC
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
Havis hole patterns
2.125 x 2.125
1.50 x 3.00
Gamber-Johnson 2.00" x 4.094"
hole plattern
2.1250
3.0000
1.5000
1.5000
2.1250
VESA 75mm & 100mm
PMT hole pattern 3/8" singe bolt
NEC hole pattern
40mmhole patterns
40mm
AMPS hole pattern
30mm x 38mm
100mm
75mm
75mm
100mm
40mm
40mm
38mm
30mm
Loading...