Gamber-Johnson 7160-0408 User Manual
INSTALLATION INSTRUCTIONS
Product Revision Form #
7160-0408
A
INTERFACE - TabCruzer / NEC Pattern to
Gamber-Johnson 2.00" x 4.09"
Printing Spec: PS-001
7160-0408 Interface allows the mounting of Gamber-Johnson TabCruzer or other
device with NEC hole pattern on a Gamber-Johnson Motion Attachment with a
2.00" x 4.09" pattern.
A #2 drive Phillips screwdriver and 7/16" & 11/32" wrenches or sockets are
needed for assembly.
Place the Interface on the Gamber-Johnson Motion Attachment with the small notch
along the top edge. This will allow the TabCruzer to be rotated to horizontal and
vertical positions.
Attach the Interface to the Motion Attachment with (4) .25-20unc Washers and
Nylok Nuts supplied in the hardware bag.
Attach the TabCruzer to the Interface with (3) #8-32UNC x 1.00" Phillips Pan Head
Screws and Nylok Nuts supplied with the TabCruzer (see INST-543 & INST-555).
INST-561
7160-0408 Interface Plate
Position Notch
along Top Edge
NEC Pattern
Gamber-Johnson Motion Attachment
w/ 2.00" x 4.09" Pattern
4X - .25-20UNC
Washers & Nylok Nuts
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
© copyright 2012 Gamber -Johnson, LLC
If y ou need assistance or have questions, call Gambe r-Johnson at 1-800-456-6868
Loading...