Gamber-Johnson 7160-0390-xx User Manual

INSTALLATION INSTRUCTIONS

Product Revision Form

7160-0390-04, -05, -06, -10, -11, -12

PANASONIC TOUGHBOOK CF-31 MAG DOCKING STATION, w/GPS

Rev.A

Printing Spec: PS-001

This instruction sheet is a supplement to INST-509 & INST-398 for the following products:
Panasonic Toughbook CF-31 docking station with no integrated high gain antenna pass-thru cables.

Item No. 7160­Item No. 7160-

0390-04 (Button lock, N o RF , Int. power)
0390-10 ( Auto lock, No RF, Int. po wer)

Panasonic Toughbook CF-31 docking station with single integrated high gain antenna pass-thru cable.

Item No. 7160­Item No. 7160-

0390-05 (Button lock, Sin gle RF, Int. power )
0390-11 ( Auto lock, S ingle RF, Int. powe r)

Panasonic Toughbook CF-31 docking station with
dual integrated high gain antenna pass-thru cable.

Item No. 7160­Item No. 7160-

0390-06 (Button lock, D u al RF, Int. power)
0390-12 ( Auto lock, Dual RF, Int. power)

REFERENC E INST-509 & INST-398 FOR COMPLETE INSTALLATION AND USE INST RUCTIONS

INST-552

INSTALLATION

The GPS module is powered via the CF-31 Mag Docking Station power cable. Follow INST-398 for
the dock wiring considerations.

The GPS antenna is located under the gray plastic cover on top of the Mag Dock. The do ck should be
installed so that the gray cover has a clear view of they sky through the windshild.

The hardware bag contians a harness that allows for four inputs and three outputs (I/O Harness) The
ouputs should be connecte d using standard automotive relays.

WireColor Signal/Description

BlueWire Input1‐Vi sibleonScreen

OrangeWire Input2

VioletWire Input3

GreyWire Input4

GreenWire Output1‐StarterDisableRelay

BrownWire Output2‐HonkHorn

Figure 1 - I/O Harness

Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

© copyright 2011 Gamber -Johnson, LLC

If y ou need assistance or have questions, call Gambe r-Johnson at 1-800-456-6868

YellowWire Output3‐Unlock Doors

SETUP AND TESTING

To activa te your account contact Tag Global Systems at 1-800-630-4708. (Service ac tications can
only be processed by the wireless carriers bewteen 9 am and 5 pm Central time, Monday thru Friday.
Actication orders typically take 1 hour to process through the GSM wireless network partners.)
The dock serial number (located on the white label on the bottom of the dock) is the serial number
requir ed for actication. For future reference you c an record your serial number and VIN or license
number here.

VI N /L ice nse: _____ _____ _____ _______________ ____ Se rial #______ _____ _____ _____ __
Once your ac count is activated make sure the unit is getting good GSM/GPS signals. Use the hole in

the side of the dock housing to view the troubleshooting LEDs on the GPS unit.

Troubleshooting
Port

Figure 2

Once the system has been fully tested and is functional. Plug Troublshooting Port hole with plug
supplied in hardware bag.

Figur e 3 - Trou blesho oting L EDs