Gamber-Johnson 7160-0375 User Manual

INSTALLATION INSTRUCTIONS

Product Revision Form

7160-0375

Rev.A

INST-589

MCS-EXTENDED PANEL ARMREST

Fig. 1 ­Remove the Holddown Rails and
use a utility knife to cut out 2" sections
of the dual-lock fastener material
from both console box flanges in the area
the Armrest Panel will be mounted.

Fig. 2 ­Place the Armrest Assembly in the prepared
area and attach any other panels or
faceplates being installed to the dual-lock
fastener material as usual.

Printing Spec: PS-001

Remove
Dual-Lock
Fastener

Armrest
Assembly

Fig. 3 ­Reinstall the Holddown Rails to seure

Holddown
Rail

the Armrest Assembly and equipment
in place.

Product Mounting Disclaimer

Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage

Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson

of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is

products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications

required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

© copyright 2012 Gamber -Johnson, LLC

If y ou need assistance or have questions, call Gambe r-Johnson at 1-800-456-6868

1 / 1