Gamber-Johnson 7160-0349 User Manual

INSTALLATION INSTRUCTIONS

Product Revision Form

Panaso nic C FH 2 Vehicle C radle

7160-0349

This instruction sheet is for the Gamber-Johnson Panasonic
Toughbook CFH2 Vehicle Cradle.

Gamber-Johnson Part Number: 7160-0349

*These instructions are for the cradle only. For
instructions on features, set-up and operation of the
Toughbook CFH2 computer, please refer to the manuals
provided by Panasonic with the co mputer.

Rev. A

Printing Spec: PS-001

INST-549

IMPORTANT SAFETY INFORMATION for

I

NSTALLERS

Safety is dependent on the proper installation and servicing of this cradle. It is important to
read and follow all instructions before installing this product.

To properly install a Gamber-Johnson cradle you must have a good understanding of
electrical procedures and systems, along with proficiency in the installation and service of
electrical and/or computer equipment.

There are no adjustments required at any time of the mechanical components within the
cradle.

Product Mounting Disclaimer

Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage

Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson

of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is

products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications

required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

© copyright 2009 Gamber-Johnson, LLC

Opening the cradle housing will void the product warranty.

If y ou need assistance or have questions, call Gambe r-Johnson at 1-800-456-6868

1 of 4

Front V iew

Compo nents

Latching
Mechanism

Actuator Button

Lock ( Optional)

FIG. A

Back View

(Use M4 x 0.7 Screws Provided)

Expansion Bus

Mounting Holes

75mm VESA

FIG. B

2 of 4