Gamber-Johnson 7160-0252 User Manual

INSTALLATION INSTRUCTIONS

Product Revision Form

Notepad™V - Universal Cradle & Accessories

7160-0250 Notepad™ V Universal Cradle
7160-0250-01 No tepad™V Universal Cradle w/Tall Side Clips
7160-0250-02 No tepad™V Universal C radle w/Zero E dge Side Clips
7160-0251 Screen S upport Assembly
7160-0252 LED Light Assembly
7160-0253 Mic Clip Assembly

Rev. D

Printing Spec: PS-001

7160-0250 Notepad™V Universal Cradle w/Standard Side Clips
7160-0250-01 Notepad™V Universal Cradle w/Tall SIde Clips
7160-0250-02 Notepad™V Universal Cradle w/Zero Edge Side Clips

Notepad™V Universal Computer Mounts 7160-0250 & 7160-0250-02, will accomodate
computers 10.62" to 16.50" in width, 9.00" to 12.00" in depth and up to 1.50" thick.
Notepad™V Universal Computer Mount w/Tall Side Clips 7160-0250-01, will accomodate
computers up to 2.00" thick.

The Notepad™V hold-down clips and key lock are designed to securely hold the laptop
in the mount and deter theft, not prevent it.
Gamber-Johnson recommends taking your laptop out of the vehicle when not in use.

9/64" Hex (Allen) wrench is needed to adjust clip location and postion.
7/16" Wrench or Socket is need to attach Notepad™V to Gamber-Johnson Motion Attachments.
#2 Phillips screwdriver and a 9/64" Hex (Allen) wrench are need to mount accessories.

INST-479

Rear Clip

Vinyl Cap

Side Clips

Rear Support and Brace

Deck

Vinyl Cap

Flat Front Clip

Clip Guide

Lockable Latch

Tee Nut

Offset Front Clip

Product Mounting Disclaimer

Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage

Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson

of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is

products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications

required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

© copyright 2011 Gamber -Johnson, LLC

If y ou need assistance or have questions, call Gambe r-Johnson at 1-800-456- 6868

1 / 5

Rear Support Assembly

Two Rear Support Clips must be assembled at the time of installation.
Attach each Support Bracket to Tee Nut located in channel on back edge of Notepad™V
using a #8-32 x .38 Socket Head Screw.
Attach the Rear Clip to the Support Bracket with a #8 external tooth washer and
a #8-32 x .31 Nylon Patch Socket Head Screw.

#8-32 x .38 Socket Head Screw

#8 External Tooth Washer &
#8-32 x .31 Nylon Patch Socket Head Screw

Vehicle Mounting

The Notepad™V Universal Cradle is designed to be used with Gamber-Johnson
motion attachments, poles and vehicle bases.
The Sliding Mount Bar feature allows side-to-side adjustment of cradle to desired
mounting position.
Four .25 Flat Washers and .25-20 x .62 long Hex Head Screws are supplied
in the hardware bag to secure motion attachments to the bottom side of the cradle.

.25-20 x .62 Hex Head Screws
& .25 Flat Washers

Sliding Mount Bars on bottom surface

2 / 5