Gamber-Johnson 7160-0126 User Manual

INSTALLATION INSTRUCTIONS

Product Date Form #

7160-0126

PENTAX PRINTER MOUNT

3-31-08

Mounting the P entax Printer Mount to a Gamb er-Johnson DS-74 mounting
bracket:

1. Attach the printer mount to a DS-74 with the #10-32unc x 3/8" long screws and split
lock washers provided in hardware bag 7120-0427. There a re multiple hole locations on
the bottom of the printer mount and in the DS-74 mounting bracket, so use the holes that
will best l ocate the printer mount for your specific application.

2. The printer mount comes with a cable strain relief bracket located in the hardware
bag. If your specific application has room to mount the strain relief bracket, you can do
so with the #6-32unc x 1/4" nylon patch screws found in the hardware bag.

INST-388

Pentax Printer
Mount

#6-32unc x 1/4"

DS-74 mounting

nylon patch screws

bracket

Strain Relief
Bracket

#10-32unc x 3/8" Screws
and Lock Washers

Product Mounting Disclaimer

Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage

Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson

of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is

products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications

required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

If y ou need assistance or have questions, call Gambe r-Johnson at 1-800-456-6868

Installing the Pentax Printer:

1. Insert the paper roll spindle into the paper roll then place the roll into the printer
mount. The paper should roll off the top of the roll toward the printer. See figures 1 & 2

2. Plug the wires into the Pentax printer and insert into the mount. The left side of the
printer slides under the tab on the left side of the mount. The printer will then nest
inside the formed flanges on the mount base. The top cover will h old the printer in
place. See figures 3 & 4

FIGURE 1. FIGURE 2.

FIGURE 3.

FIGURE 4.