Gamber-Johnson 7160-0069 User Manual

INSTALLATION INSTRUCTIONS

Product Date Form #

MOTOROLA MW800/810 PED ESTAL MOUNT

01/17/08

7160- 0069 & 7160- 0077

Install ass embly 7160-0069 into the vehicle using customer supplied bolts and nuts of the
largest size that will fit the four square holes in the base plate. Do not use lag screws or
sheet metal screws a s these can p ull out of the floor . We recommend placin g fender
washers, which have a larger outside diameter than regular washers, on the back side of
the mounting surf ace. Placing the bolts so the nuts are inside the vehicle will prevent
corrosion from freezing the nuts on the bolts.

Assembly 7160-0077 does not include the mounting pl ate and lower pole. Insert the
assembly into a Gamber Johnson lower pole application such as a vehicle base or MCS
top plate.

To adjust the pole height, loosen the bolt at the top of the post one turn. If necessary, tap
lightly on the top of the bolt to release the screen display. Adjust the height and direction
of the screen display and retighten the bolt.

INST-350

Loosen and tap bolt to
adjust top plate height.

Keyboard Holder

Screen Display

Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

If y ou need assistance or have questions, call Gambe r-Johnson at 1-800-456-6868