Gamber-Johnson 7110-1024 User Manual

INSTALLATION INSTRUCTIONS

Product Form

7110-1024

Revision

Rev.A

INST-641

WIRE CHASE ASSEMBLY ­TAHOE CONSOLE BOX

WIRE CHASE - INSIDE

Printing Spec:

WIRE CHASE - OUTSIDE

PS-001

PARTS LIST

PART NO.

15225
15249
7120-0641

1122-1006•
3130-0579

•

DESCRIPTION QUANTITY
WIRE CHASE - OUTSIDE

WIRE CHASE - INSIDE
7120-0641

•

#10-32 X .375 PPHMS
#10 FLAT WASHER

••

1
1
1

8•
8

TOOLS NEEDED

PHILLIPS SCREW DRIVER

INSTALLATION INSTRUCTIONS

Insert the Wire Chase - Inside box into the Wire Chase - Outside box, slide it in or out •

to desired length and secure it from either sides using provided hardware.

Secure the Wire Chase Assembly to the console box using provided hardware, •

see figure above.

Product Mounting Disclaimer

Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage

Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installa tion or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson

of any nature arising directly or indirectly as a result of the improper installa tion or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the loc ation of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is

products full consideration of vehicle occupants, vehicle systems (i.e., the loc ation of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications

required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

© Copyright 2014 Gamber-J ohns on , LLC

If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868