Gamber-Johnson 14422 User Manual

INSTALLATION INSTRUCTIONS

Product Revision Form

14422

DODGE CHARGER FILLER PANEL

Rev.A

Printing Spec: PS-001

INST-538

MP3/USB
KNOCKOUT

12v JACK
KNOCKOUT

12v jacks:

1. Remo ve a 12v jack from the console by pressing the jack through f r om behind.

2. Seperate the cap and ring from the 12v jack by depressing the tabs inside the
jack (Figure 1) then pressing the metal sleeve out o f the plastic ring.

3. Remove the knockout from the filler panel

4. Install the ring and cap into the filler panel . Note orientation of notch.

5. Ins tall the 12v jack into th e ring.

6. Repe at for second 12v jack if desired.

FIGURE 1

CAP AND RING

USB/MP3 Jack:

1. Remove USB /MP3 box from factory consol e by depressing tabs on either side.

2. Remove the square knockout from filler panel.

3. Snap the USB/M P3 box into the opening in the filler panel.

Product Mounting Disclaimer

Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage

Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson

of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is

products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications

required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

© copyright 2010 Gamber -Johnson, LLC

If y ou need assistance or have questions, call Gambe r-Johnson at 1-800-456-6868