GAM TSPS-20 User Manual

PRODUCT INSTRUCTIONS

• The GAM Power Dual Power Supply has a 60 watt
capacity so that it can comfortably handle two units
such as two indexing TwinSpin™ or the 6-Gobo
Trays (for each one).

• The GAM Dual Power Supply will work on either
120 or 230 volts 50 or 60 Hz, simply plug it
in and it automatically selects its operating mode
when you plug it into an AC outlet.

• There is one removable AC power cord supplied
with each unit. Wired to the power supply are two
XLR connectors one for DMX input control and one
for power distribution. The 5-pin male connector
is for DMX signal. The four pin female connector
is power and control distribution to your unit.

R

TSPS-20 DUAL POWER SUPPLY

GAM Product #TSPS-20

Rosco Product # 205 7142 00050

4-pin XLR connector

• Connect your DMX signal (from your control console)
to the 5-pin connector.

• Plug the 4-pin XLR connector into your unit (6-Gobo
Tray or Indexing Rotator). You can then loop to one
more unit using a 4 wire extension cable with male
and female 4-pin XLR connectors.

• Plug the AC power supplied with the GAM Dual
Power Supply into a 120 or 230 volt - 50 or
60 Hz outlet.

To AC Power

5-pin XLR
DMX from Console

4-pin XLR
Power and Control to Unit

5-pin XLR connector

Page 1 of 2

AC Connection

AC Power Cord

www.rosco.com

4

2

1

3

PRODUCT NUMBER

TSPS-20 / 205 7142 00050

TSPS20 - PSU 50 (no DMX pass-thru)

TSPS-20WHT / 205 7142 10050

TSPS20 (white) - PSU 50 (no DMX pass-thru)

1. ZPTSPS-01 / 206 TSPS 01000

Pwr Sply 120v -240v - 24v output

2. ZPTSPS-02 / 206 TSPS 02000

XLR Black Cnctr’ Male 5-pin

3. ZPTSPS-03 / 206 TSPS 03000

XLR Black Cnctr’ Female 4-pin

4. ZPTSPS-04 / 206 TSPS 04000

Power Cord DGS AC

5. ZPTSPS-05 / 206 TSPS 05000

Power Cord’ Black 18/2 spt Zip

ZPTSPS-06 / 206 TSPS 06000

XLR Black Cnctr’ Female 5-pin

ZPTSPS-07 / 206 TSPS 07000

Power Adapter 120v to 12VDC

5

Page 2 of 2

www.rosco.com