Galley 9429 User Manual
Request a Catalog
113
®
Sanitary, Heavy Duty
Cafeteria Tray/Silverware
Module
& Condiment Module
Model No. 9429
Model No. 9430
Model No. 9434
Model No. 9436
Model No. 9437
Model No. 9440
Model No. 9441
Model No. 9830
Model No. 9836
• Aesthetic design, three neutral colors, dove
white,
pewter tan, or black pearl blend in with
any surroundings.
• Four built-in & concealed stainless steel
handles allow easy portability.
• Self-locking and self-aligning features
eliminate time consuming hookup.
• Lightweight but extra-strong construction
provides ease of mobility.
• Casters and brakes are almost completely
concealed from patronʼs view.
• Soft textured surfaces and rounded corners
help prevent skin cuts and clothing snags.
Item No.
U.S. PATENTNUMBERS 4,013,880 AND 4,008,931
Tray/Silverware Module – For starting end of
cafeteria
serving line. Top silverware cylinder
holder
can be easily adjusted for access from
either
front or back of module.
Tray/Silverware Module #9430 shown
Plastic
silverware cylinders are not included with basic unit.
Sanitary, Heavy-duty, Scratch-resistant Serving Lines
The
Cafeteria
Line
The
Buffet
Line
The
Speed
Line
The
Soup & Salad
Line
The
Kiosk
Line
Galley
Designs
Galley
Finishing
Touches
Galley
Products
Home
Galley®Line
Cafeteria Tray/Silverware & Condiment Modules
Model No’s. 9429, 9430, 9434, 9436, 9437, 9440, 9441, 9830, 9836
To be Galley®Line Tray/Silverware Module, Model ________
with accessories as specified.
G E N E R A L : Unit to be self-contained, mobile self-service
Tray/Silverware Module. Body material to be one of two neutral
base colors, dove white or pewter tan. “Matelock” self-locking
and aligning end panels allow modules to be interconnected. To
have recessed push handles at each end. To be listed by the
National Sanitation Foundation.
C O N S T R U C T I O N : Body material to be of flame retardant
ABS formed plastic fastened to a galvaneal undercarriage. 14
ga. 300 series stainless steel top to have not less than #4 finish.
Tray shelf and sides to be of a 14 ga. 300 series stainless steel.
Silverware dispenser to hold 12 cylinders and can be reversed
for access from either side. Plate mounted 4" diameter swivel
casters with toe brakes to be provided.
Specifications subject to change without notice.
SPECIFICATION DRAWING OF BASIC UNIT
Note: If unit is to be used independently, add 4" to
width for clearance on all specifications.
ACCESSORIES:
A. Extension shelf. Stainless steel. Mounted flush with top of
module. Self-mounting. 16" wide x 28" deep.
c
Catalog No. 8754. (Not for use with item B or E).
B. “Mateflat” Panel. (Makes any Galley unit compatible with any
other serving line equipment or for squaring unit to wall.)
Size 53/8"W x 28"D x 36"H.
c
Catalog No. 8761 Male Panel (Fits female end).
c
Catalog No. 8762 Female Panel (Fits male end).
C. Plastic Silverware Cylinders. Holds twelve.
c
Catalog No. P45, Quantity______.
D. Low End Shelf. Self-mounting. 16" wide x 28" deep.
c
Catalog No. 8725.
E. Flat End Panel. (Makes any Galley unit compatible with any
other serving line equipment or for squaring unit to wall.)
c
Catalog No. 8731. Replaces Female "matelock".
c
Catalog No. 8732. Replaces Male "matelock".
Model 9434
114
Model 9430 & 9431
Model
9429 with
optional
flat end
Loading...