Galley®Line Hot Food Modules
Model No’s. 9030, 9031, 9032, 9033, 9034
Model No’s. 9040, 9041, 9042, 9043, 9044
Model No’s. 9050, 9051, 9052, 9053, 9054
To be Galley®Line Cafeteria Hot Well Unit, Model ___________ with
accessories as specified.
GENERAL: Unit to be self-contained, mobile cafeteria Hot Well module for
heated foods. Body material to be one of three neutral base colors, dove
white, pewter tan or black pearl. “Matelock” self-locking and aligning end panels allow modules to be interconnected. To have recessed push handles at
each end. Removable side panel on customer’s side to be recessed to accept
decorator panels. Server side to be open to accept accessories. To be listed
by Underwriters’Laboratories and The National Sanitation Foundation.
CONSTRUCTION: Body material to be of flame retardant ABS formed plastic
fastened to a galvanized steel undercarriage. 14 ga. 300 series stainless steel
top to have not less than No. 4 finish. To have a die-stamped openings with
raised edges to accept a 4" deep x 12 x 12 pans. Dry hot food well (500W
each) to be constructed to provide bottom and side heating to hold
hot food at serving temperature. Each Hot food well to be
individually controlled by means of an infinite switch. Plate mounted 4" diameter swivel casters with toe brakes to be provided. Power supply cord to be 6
feet in length.
ELECTRICAL RATING: Unit specified to be rated at:
________ volts AC, ________ watts, ________ phase, ________ amps, ________
Hz. Cord to have NEMA__________ plug configuration.
NOTE: If unit is to be used independently, add 4" to width for clearance on all specifications. Add 3
1
/2" to depth
for folded trayslide and 3
1
/4" for folded cutting board.
ACCESSORIES:
A. Decorator panels, specify catalog number and quantity.
(See chart on front side.)
c
Catalog No. 8700 American Walnut, Quantity______ Included.
c
Catalog No. 8701 Teakwood, Quantity_______.
c
Catalog No. 8702 Plain Custom Panels, Quantity______.
B. Food Pan Adapters, specify quantity.
c
Catalog No. 8750 Hot Well Adapter for use with 6" deep
12 x 20 pans Quantity______.
C. Folding Trayslides. All stainless steel with die-stamped
three-rib reinforcement.
c
Catalog No. 8773, (*Short 50") 427/8" width, used on
9030 series.
c
Catalog No. 8774, 50" width, used on 9030 series.
c
Catalog No. 8775, (*Short 641/2") 57
3/8" width, used on 9040 series.
c
Catalog No. 8776, 641/2" width, used on 9040 series.
c
Catalog No. 8777, (*Short 79") 7
1
7/
8
" width, used on 9050 series.
c
Catalog No. 8778, 79" width, used on 9050 series.
*Note: A “Short Trayslide” must be used on the first module to the right of corner In-
Fill Module for inside turns.
D. Hot Food Protector with plastic shelf, breathguard and stainless steel upright sup-
ports. 14" high field mounted.
c
Catalog No. 8780, 50" width, used on 9030 series. Unlighted.
c
Catalog No. 8791, 50" width, used on 9030 series. Lighted.
ULlisted.
c
Catalog No. 8781, 641/2" width, used on 9040 series.Unlighted.
c
Catalog No. 8792, 641/2" width, used on 9040 series. Lighted.
UL listed.
c
Catalog No. 8782, 79" width, used on 9050 series.Unlighted.
c
Catalog No. 8793, 79" width, used on 9050 series. Lighted.
ULlisted.
E. Folding Cutting Board. All plastic. Mounted flush on server’
s
side.
c
Catalog No. 8763, 50" width, used on 9030 series.
c
Catalog No. 8764, 641/2" width, used on 9040 series.
c
Catalog No. 8765, 79" width, used on 9050 series.
F. Extension Shelf. Stainless steel. Mounted flush with top of module.
Self-mounting. 16" wide x 28" deep.
c
Catalog No. 8754 (Not for use with item I or N).
G. Undercounter Shelving System. Maximum: two per unit. All stainless steel.
Removable 18" depth with 1" front edge.
c
Catalog No. 8757 4
1
1
/2" width, used on 9030 series.
c
Catalog No. 8758 561/16" width, used on 9040 series.
c
Catalog No. 8759 701/2" width, used on 9050 series.
H. Utility Drawer. Stainless steel. Has lock and removable liner. Outside dimensions:
2
5
1
/4"W x 23"D x 71/4"H. Mounted on server’s side.
c
Catalog No. 8760.
I. “Mateflat” Panel. (Makes any Galley unit compatible with any other serving line
equipment or for squaring unit to wall.) Size: 5
3/
8
"W x 28"D x 36"H.
c
Catalog No. 8761 Male Panel (fits female end).
c
Catalog No. 8762 Female Panel (fits male end).
J. Buffet Style Canopy.
c
Catalog No. 8740 use with 50" unit. ULlisted.
c
Catalog No. 8741 use with 641/2" unit. ULlisted.
c
Catalog No. 8742 use with 79" unit. ULlisted.
K. Low End Shelf.
c
Catalog No. 8725 (Not for use with item I or N).
L. Buffet Style Canopy with Heat Lamps.
c
Catalog No. 8743 use with 50" unit. ULlisted.
c
Catalog No. 8744 use with 641/2" unit. ULlisted.
c
Catalog No. 8745 use with 79" unit. ULlisted.
M. Close Off For Server’s Side.
c
Catalog No. 8734 use with 50" unit. ULlisted.
c
Catalog No. 8735 use with 641/2" unit. ULlisted.
c
Catalog No. 8736 use with 79" unit. ULlisted.
N. Flat End Panels. (Makes any Galley unit compatible with any other serving line
equipment or for squaring unit to wall).
c
Catalog No. 8731 Replaces Female "matelock".
c
Catalog No. 8732 Replaces Male "matelock".
O. ELECTRICALOUTLETS (Not ULListed).
c
Catalog No. 8696 Tombstone, Top Mounted, Duplex, 125V, 15 AMP.
c
Catalog No. 8697 Operator Side, Under Top Skirt, Duplex, 120V, 16 AMP.
c
Catalog No. 8698 Operator Side, Under Top Skirt, Duplex, 120V, 15 AMP
.
c
Catalog No. 8699 Operator Side, Under Top Skirt, Duplex, 120V, 15 AMP.
NOTE: #8696 and #8697 are part of the module wiring. #8698 and #8699 have
separate cord set.
No Plug Configuration Available For Canada on Models 9034, 9044 and 9054.
SPECIFICATION DRAWING OF BASIC UNIT
WITH HOT FOOD PROTECTOR, FOLDING TRAYSLIDE
AND FOLDING CUTTING BOARD ACCESSORIES
Cat.
No. Conductors