Galley 8663 User Manual

Request a Catalog

Sanitary, Heavy-duty, Scratch-resistant Serving Lines

The

Cafeteria

Line

The

Buffet

Line

? No’s. 8677, 8678, 8679, 8685 Extended Top Surfaces.

To create built in trayslides and plate rests.

The

Speed

Line

The

Soup & Salad

Line

The

Kiosk

Line

Galley

Designs

Galley

Finishing

Touches

Galley

Products

®

A c c e s s o r i e s

Home

? No’s. 8660, 8661, 8662, 8663, 8689 Backsplash and
Riser. 4" high, #4 finish stainless steel and fully enclosed.

? No. 8880 Stainless Steel Handsink. With strain and
gooseneck faucet installed in module. (Shown with optional
backsplash).

132

? No’s. 8984, 8985, 8986 Gas Hot Wells. 8" deep with stain-
less steel louvered safety protector. Specify natural or LP gas.

Galley

Line Drop-In Warmer - Rectangular; Gas Hot Well

without drain, 8" deep, with safety pilots on each well;
Adjustable gas valve with pilot light; Top Rim: Constructed of
heavy gauge, 300 series stainless steel with 15/16" overhang
on ends, 15/16" overhang on back, operators side turned down.
Rim reinforced by heavy gauge steel angle and provided with
vinyl foam gasket as sealant with top surface. Top: Provided
with die-stamped openings, each measuring 12-1/16" x
20-1/16", with 20-1/16" measurment running from front to back.
Heat Compartments: With die-formed 8" deep liner, fabricated
of stainless steel, insulated on all 4 sides, bottom and between
sections with 1" fiberglass. Each compartment has individual
burner rated at 3500 BTUʼs input per hour designed for use with
natural or propane gas, as ordered. Each burner controlled by
an adjustable gas valve with adjustable pilot light. Galvanized
steel radiation plate furnished in each compartment, with gas
pressure regulator provided for each slide-in. Exterior Housing:
Constructed of heavy gauge steel except for operatorʼs side
which will be stainless steel; Includes stainless steel louvered
rear saftey panel; No under storage permitted.