Galleon VCSDVR-HDCVI4, VCS-HDCVI User Manual

H.264 Standalone DVR

USER MANUAL_V2.08

INDEX

Chapter one Products Introduce.....................................................................................4

1.1 Technical Parameter............................................................................................................................ 4

1.2 Performance........................................................................................................................................ 5

Chapter Two Hardware.......................................................................................................6

2.1 H.264 standalone 4CH/8CH/16CH/24CH/32CH DVR....................................................................... 6

Chapter Three Operation.................................................................................................11

3.１Operation instruction........................................................................................................................ 11

3.2 Powering On......................................................................................................................................14

3.3 Shutdown...........................................................................................................................................16

3.4 Multi Channel....................................................................................................................................16

3.5 Preview..............................................................................................................................................17

3.6 Recording operation....................................................................................................................... 17

3.7 Playback video.................................................................................................................................. 18

3.8 How to control PTZ...........................................................................................................................19

3.9 Alarm control.....................................................................................................................................21

3.10 Display Adjust................................................................................................................................. 21

Chapter Four Menu Operation Guide...........................................................................22

4.1 Recording Setup................................................................................................................................ 22

4.2 Camera.............................................................................................................................................. 24

4.3 Network Setup...................................................................................................................................26

4.4 System Setup..................................................................................................................................... 31

4.5 System Management......................................................................................................................... 34

Chapter Five IE Preview.................................................................................................. 37

5.1 logging on interface.......................................................................................................................... 37

5.2 System Settings................................................................................................................................. 38

5.3 State control.......................................................................................................................................41

Chapter Six Asee series phone software for use.................................................. 44

6.1 Asee................................................................................................................................................... 44

6.1.1 Instructions of Android .................................................................................................................. 45

6.1.2 Instructions of Blackberry ............................................................................................................. 51

6.1.3 Instructions of iPhone .................................................................................................................... 55

6.1.4 Instructions of Symbian..................................................................................................................61

Chapter Seven Instructions of imac........................................................................65

7.1 Essential condition.............................................................................................................................65

7.2 Installation and operation instructions............................................................................................... 65

Chapter Eight The Cloud funtion............................................................................. 69

8.1 DVR Setup........................................................................................................................................ 69

8.2 PC Setup............................................................................................................................................72

8.3 The other operation of PC..................................................................................................................77

Chapter nine The use of P2P phone software Nvplayer.........................................86

9.1 instructions of Android................................................................................................................... 86

9.1.1 Essential condition..........................................................................................................................86

9.1.2 Installation and operation instructions............................................................................................ 86

9.2 instructions of iPhone..................................................................................................................... 91

9.2.1 Essential condition..........................................................................................................................91

9.2.2 Installation and operation instructions............................................................................................ 91

Chapter Ten FAQ (Frequently Asked Questions)......................................................96

Power

This DVR select the adaptor is DC12V; please make sure the power supply voltage before use the

machine.

If long time do not use the machine, please turn off the power of DVR machine, and let the electric plug

away from power socket;



...

safety

This DVR only for indoor use, as for prevent short circuit or electric danger, please do not let the DVR in the

raining or humid area.

In case any solid or liquid inside the case of DVR, please turn off the power immediately, and ask the qualified

technician check it before reboot the DVR;

The DVR is the precision machine, there is nothing for repair by customers themselves in it, when it break

down, please ask the qualified technician to check and repair, or contact with the agents of it.



...

Installation

Please keep the DVR in level for installation;

Pay attention to equipment ground;

For the first time to install the DVR, please make sure if the hard disk drive install or not;

Prevent to open the case and change the hard disk drive in electrified;

Propose to select the performance of hard disk drive will be 7200 rotating speed person second;

Please select the appropriate installation site, so let the air can be free flow inside the DVR, prevent the

machine overheating;

Please do not install the DVR nearby the radiator, air chute etc. heat source,

or where the direct sunlight, too much dust, or mechanical vibration or attack;

Chapter one Products Introduce

1.1 Technical Parameter

Compression standard H.264 baseline profile@L3.1

Video iInput Composite 1.0Vp-p/75Ω,BNC×4/ BNC×8/ BNC×16/ BNC×24/ BNC×32

Video output Composite 1.0Vp-p/75Ω,BNC×1, VGA×1

Resolution Preview D1 704×576（PAL），720×480（NTSC）

CIF 352×288（PAL），320×240（NTSC）

Recording D1 704×576（PAL），720×480（NTSC）

CIF 352×288（PAL），320×240（NTSC）

Frate rate Preview/ recording

4ch 100fps(PAL), 120fps(NTSC

8ch 200fps(PAL), 240fps(NTSC)

16ch 400fps(PAL), 480fps(NTSC)

24ch 600fps(PAL), 720fps(NTSC)

32ch 600fps(PAL), 720fps(NTSC)

Audio input -8dB~22k,RCAx4(4ch)

Audio output -8dB~92dB,RCAx1

Audio decode ADPCM

Alarm input

Input low level alarm, user setting normal open or normal close, Varies

according to the model

Alarm output 1ch output or 2ch output;Varies according to the model

Recording mode Manual recording, timing recording , motion detection recording and external

alarm recording

Simplex/duplex/ triplex triplex(recording, playback , LAN transmission)

LAN RJ45(10M/100M self-adapting)

PTZ control Yes

Communication RS485×1，USB2.0×2

USB USB mouse control

Hard disk drive 1or2or4x SATA（2TB or above）

Remote control unit Yes

Dimension Main board size : 220mm x 112mm

Power supply AC110-230V

1.2 Performance

Real-time

monitoring

Turn-by-turn analog video output and

VGA interface, according to TVmonitor or

VGA monitor to live view

in1/4/8/9/16/24/32or more video channel

tomonitoring the recording streaming and

the record file capacity in Every hours

every channel, to presentation the status

of video channel, recording, dynamic

detection, video loss, monitoring lock-up.

You can view the system log in local

DVR.

Storage

function

Internal 1or2 or 3SATA interface, MAX

2TB hard disk drive, the file of hard

disk drive include cover mode

circulation recording and none cyclical

recording, the storage data to use the

proprietary format, can not falsify the

data, make sure the data safety.

Compression

format

Video compression format:: H.264

Support 8ch video and audio signal,

video

and audio maintaining stability in

synchronous.

Backup

function

Through USB interface to backup. ( for

example USB drive and mobile hard

disk drive etc.) The video file can be

downloaded by Client software

through LAN to laptop hard disk drive.

Recording

and

playback

function

* Multiplex, to achieve real time recording

to be independent at the same time to

single channel playback, research and

backwards, network monitoring, network

search download etc.

* Multiple recording mode: Manual,

normal, alarm, linkage,dynamic detection

recording etc. turn-by-turn pre-recording

function.

* Can playback the record file in DVR

through network, to achieve quick-search

the recording file and recording type,

multiple playback type: SLOW, Fast

Forward, Backwards, step Forward.

Display the exact time of event occurred

while recording file playback.

Network

Operation

function

* through network to real time remote

monitoring;

* PTZ control

* recording research and real time

playback;

* system setting parameter modify and

the system software upgrade;

* remote monitoring alarm process and

view the system log message;

* to use embedded TCP/IP protocol and

Embedded Operation System, can

access the DVR through client software

program bundle in the package;

*Management Model: use enhancement

user management, password mode to

make sure the valid user to login the

system, flexible convenient and fast to

set the different permission user

requirement.

Alarm

linkage

function

8ch alarm input ( alarm event mode can

be set normal open or normal close

selection),and turn-by-turn video loss

alarm, dynamic detection alarm, the

alarm device may be smoke detection

censer, temperature detector, IR

detector.Possess 4ch relay switch

alarm output, flexible convenient and

fast to achieve alarm linkage and

lighting control at site.

They’re possess protective circuit in

Alarm input and alarm output port,

make sure the device not to damaged.

Com-munication

port

* Possess specific interface, achieve

alarm input and PTZ control;

* possess a standard Ethernet interface,

achieve the network remote

monitoring.

PTZ

control

* Support PTZ decoder through RS485

communicate

* scalable multiple decoder protocol,

easy to achieve to control the pan

driver and speed dome camera

function.

Intelligent

operation

* mouse operation function;

* In menu for same setting and to

process shortcut copy operation

Chapter Two Hardware

2.1 H.264 standalone 4CH/8CH/16CH/24CH/32CH DVR

2.1.1 Hard disk Installation

For the first use, please install the hard disk

○

Remove the screws on both

○

extracted from the next cover up

○

connect hard disk and mother board

sides of shell

○

fix the screw of hard disk

○

close cover

○

install the screws on both sides of shell

2.1.2 Rear panel

4CH

Item Interface Description

1 VIDEO IN 4ch video input

2 AUDIO IN 4ch audio input

3 V-OUT 1ch video output

4 A-OUT 1ch audio output

5 VGA VGA monitor

６ HD-OUT HDMI interface

７ NETWORK RJ45 for internet

８ USB First USB for backup or upgrade system of DVR; Second

USB for mouse

９ ON/OFF Power supply switcher

１０ DC-12V Power adaptor port

１１

ALARM IN：1 2 3 4 alarm input port

RS-485：A, B

ALARM OUT: N1 alarm output port, every channel connect

GND、OUT、COM;

every two channel OUT, COM port is for GND;

8CH

Item Interface Description

1 VIDEO IN 8ch video input

2 AUDIO IN ４ｃｈｏｒ 8ch audio input

3 V-OUT 1ch video output

4 A-OUT 1ch audio output

5 VGA VGA monitor

６ HD-OUT HDMI interface

７ NETWORK RJ45

８ USB First USB for backup or upgrade system of DVR; Second

USB for mouse

９ ON/OFF Power supply switcher

１０ DC-12V Power adaptor port

１１

ALARM IN：IN1-IN4 alarm input port

RS-485：A , B

ALARM OUT: N1 alarm output port, every channel connect

GND、OUT、COM;

every two channel OUT, COM port is for GND;

16CH

Item Interface Description

1 VIDEO IN 16ch video input

2 AUDIO IN 4ch audio input

3 V-OUT 1ch video output

4 A-OUT 1ch audio output

5 VGA VGA monitor

６ HD-OUT HDMI interface

７ NETWORK RJ45 for internet

８ USB/ MOUSE First USB for backup or upgrade system of DVR； Second

USB for mouse

９ ON/OFF Power supply switcher

１０ DC-12V Power adaptor port

１１

ALARM IN：4CH alarm input port

RS-485：A, B

ALARM OUT: N1 N2 for alarm output port, every channel

connect C and O; port is for GND;

24CH

Item Interface Description

1 VIDEO IN 24ch video input

2 AUDIO IN 8ch audio input

3 V-OUT 1ch video output

4 A-OUT 1ch audio output

5 VGA VGA monitor

6 NETWORK RJ45 for internet

7 USB/ MOUSE First USB for backup or upgrade system of DVR；Second

USB for mouse

8 ON/OFF Power supply switcher

9 DC-12V Power adaptor port

10 HD-OUT HDMI interface

11 TALK AUDIO TALKBACK

ALARM IN：16CH alarm input port

RS-485：A, B RS485-S A,B

ALARM OUT: N1 N2 for alarm output port, every channel

connect C and O; port is for GND;

32CH

Item Interface Description

1 VIDEO IN 32ch video input

2 AUDIO IN 8ch audio input

3 V-OUT 1ch video output

4 A-OUT 1ch audio output

5 VGA VGA monitor

6 NETWORK RJ45 for internet

7 USB/ MOUSE First USB for backup or upgrade system of DVR；Second

USB for mouse

8 ON/OFF Power supply switcher

9 DC-12V Power adaptor port

10 HD-OUT HDMI interface

11 TALK AUDIO TALKBACK

ALARM IN：16CH alarm input port

RS-485：A, B RS485-S A,B

ALARM OUT: N1 N2 for alarm output port, every channel

connect C and O; port is for GND;

2.1.3 Alarm input port

8chanel alarm input, the mode of alarm input is no restriction (possible is normal open also normal close);

the GND alarm detector connect to COM under parallel connection (the power of alarm detector supply by

external power supply;

the ground terminal of alarm detector join-up in parallel with DVR;

the NC of alarm detector connect with the input end (alarm) of DVR;

when you want to reset the remote alarm of triggered , the +12V power supply of alarm detector supply by DVR,

for example, smoke detector.

When you select the external power supply, please share the GND with DVR;

Alarm input circuit:

Alarm inlet connection:

2.1.4 Alarm

output port

4 way switching

value alarm output,

selectable in normally open contact, also selectable in normally closed contact, the external alarm

device should be

need Vcc;

Chapter Three Operation

3.１Operation instruction

3.1.1 Remote control AND Front panel keypad

Table：

S/NKEYpad

Name

Operating

instruction

S/NKeypad

Name

Operating

instruction

【POWER】

Power ON/OFF

【 ENTER 】

【OK】

This button is used

as“enter”and“ok” key in most

circumstances

2 【MENU】 Access main menu

3 【ESC】

Exit operation or enter upper

Close soft keyboard

Close current window

Exit from current control

Return to last menu

Exit from PTZ control under

preview state

9 【PTZ】

Access/exit from PTZ control

under preview state

【】

Slow playback,1/2×, 1/4×,

1/8× and single frame play

10 【+/-】

Volume or number

increase/reduction Select item

of the list

【】

Fast playback, 2×,4× and 8×

【 ZOOM

IN/OUT】

Lens control

playback

【0~9 10+】

Digital input Corresponding;

Channel is magnified in full

screen under preview state

【FN】 Short cut

【】 Playback stop 14

【】

Switching of

1/4/8/9/16/24/32Preview mode

【】

Play / Pause

【ALARM】 Alarm reset

【 ▲.▼.

】

Four-way to move the focal

point in main menu, up and

down to move in the normal

window, to control pan driver

to move in

the PTZ control windows

【REC】

To mode of recording 16

【CLEAR】

Clear alarm

【SEARCH】

Search for playback time

choosing

3.1.2 How to use mouse of DVR (for right hand mouse)

1 Left key single click

To any function menu icon click the mouse left key into the menu

To run the control point out operation

Change again select frame or motion detection piece mode

Click the assemble frame popping to pull down the list

In the input frame, can select digit, character, lowercase, block letter, left click

mouse on the keyboard of character input, that’s. ← say move back, ＿ say

blank，Shift say switch case .

2 Right click mouse

Right click mouse, popping the shortcut menu, as follows;

。

Through the menu can be switching preview screen window mode, start

replays, PTZ control. Four pictures playback mode, the point of the right mouse

button, Can in a single picture, four pictures, eight pictures (8 road playback), 16

screen (16 road playback), twenty four picture,thirty two picture,

broadcast control switch view show or hide broadcast control bar.

Double click left

button

To run the ActiveX Control ActiveX special operation, For example, double click

the certain item of record listed file, then the system will playback the segment

record video.

Dragging the mouse

Depress the left key and dragging the mouse, banding select Motion detection

area, depress right key of mouse and Dragging, cancel the banding select area.

Dragging playback ProgressBar back and forth to dolly moves, to achieve the

playback position adjustment. Dragging the audio and video regulation

parameter bar dolly moves, to achieve the parameter adjustment.

3.2 Powering On

Boot-strap

If【POWER】pilot lamp off, please follow the operation step by step:

First step: if the power does not plug into, please plug into the power, then the DVR begin to start, by now, if the

DVR still inactive, to enter the next step;

Second step: turn on the power supply of the DVR at the back panel, DVR begins to start.

If【POWER】pilot lamp to offer RED, press the 【POWER】key, DVR begins to start.

The video output mode of DVR ’s the default setting is multi picture channel mode after starting the DVR , if the

time of start the DVR is in the Timing Recording Setting, the DVR will automatically to start the Timing Recording

function, the corresponding channel’s recording pilot lamp will be light, the DVR is normal operation.

Button Description Button Description

Main Menu PTZ control

Wizard language Alarm control

Multi channel Display setup

Recording Control

Exit

Playback Back up

If before starting, the system not to install hard disk, into the system, will tip: system didn't detect any hard disk

connection!

Note:

In this dialog you can select language and quickly set various of parameters.

3.3 Shutdown

 There are two safety mode for Shutdown

Enter【Exit】,select【Power Down】.

 Abnormal shutdown

Through the rear panel to shutdown

During the DVR running, directly to turn off the power through the rear panel power switch, please avoid as much

as possible to do it. (specially while the DVR recording).

Directly to pull up the power cable of DVR

While the DVR running, directly to pull up the power cable of DVR, please avoid as much as possible to do it.

(specially while the DVR recording).

Caution: In some area, the power supply is irregularity, it will cause the DVR working not normal-operation, the

DVR will be damaged in serious. In this surroundings, suggest select the stabilized voltage supply.

3.4 Multi Channel

1/4/8/9/16/24/32 preview screen mode switch

3.5 Preview

After log in system of DVR, system will automatically directly enter the preview mode

In the preview picture, you can see the overprint date, time, channel name, if the date and time is not correct show on

the picture, re setting the date. There is a alarm input mode icon. (the meaning of every kind of icon as following

table)

Channel picture attention

3.6 Recording operation

Customer can according to select the different kind of recording mode in this system. For the

different kind of recording mode you set, the channel will be showed the mark on everyone channel.

Manual recording

Note: Manual recording operational requirement the user should have “recording” permission.

Please make sure the hard disk drive has been installed and it has been formatted.

1）Input manual recording operation menu

Single click right key of mouse or In main menu=> recording control can into manual recording operation menu.

Under preview mode, press REC key or on the Remote controller unit key into recording control operation menu, as

follows:

2) The explanation of manual recording operation menu

【manual recording】 Priority level highest, no matter currently what status of every channel, after carry out the

manual press, corresponding channel will be record common in progress;

【Auto recording 】 Setting channel recording by setting condition to record under Timing, Motion detection and

Alarm in Recording Setting;

【Stop Recording】All video channel stop recording;

Channel is video when channel

video pictures showed this symbol

Channel happen when dynamic

test, channel video pictures

showed this symbol

Channel open sound, the channel

video pictures showed this symbol

3.7 Playback video

Button Description Button Description

Synchronous/asynchronous play Voice adjustment

frame by frame

1/4/8/9/16/24/32

screen(switch image)

Speed slow Hide / display list

Speed normal recording date

Speed fast Play/pause/stop

Sound off/on rewind

Note:

1) During playback the Playback Tool will show the file playback speed, channel, timing, playback speed etc.

information in the Playback control panel;

2) Can’t same time to select the Fast forward operation function in over 2 channel, only progress in anyone channel;

3) Can drag the Playback Speed toolbar by mouse;

4)In this dialog you can select the video precise to the second.

3.8 How to control PTZ

【Zoom】Lens in the current play far closer picture, use the mouse wheel also can undertake variable times control.

【Focus】Slight adjusting the focal length

【Iris】Aperture size adjustment

【Speed】Through the slider adjust rotation stepinterval, yuntai mainly used to control direction operation, the step

length of turning the faster yuntai.

【Preset】Adjust the camera Angle, then direction and the corresponding input and clicking on [ set] button, preset

dots to set the dots in the preset rastelli.

Input presets dots and click on [Transfer] button, the camera will be transferred to the preset point corresponding

position.Click[remove ] button, this presets dianjiang be cleared

【Set】Click 【Start Tour】 the trajectory of said no corresponding, click the 【 add Preset 】 and 【 delete Preset

point 】, 【Clear Tour】 the cruise lines.

【Start Tour】begin to track record, was registered date 【 end Tour】，thus set up from the corresponding track

circuit.

【Left Limit】Began to limit scanning Settings, was registered date 【 right Limit 】, thus set up corresponding limit

scanning.

【Add Preset】Add presets point to the cruise lines.

【Delete Preset】Cruise lines from deleting preset points.

【Clear Tour】Remove the cruise line designated.

Note: some equipment doesn't fully support all function, depending on the specific yuntai equipment and different.

【Control】PTZ Control

【Tour Scan】Point between cruise control.

【Pattern Scan】Track patrol control.

【PTZ Reset】Remove all Settings, original reset to the original state.

【Limit Scan】Yuntai boundary scan control around.

【Auto Pan】Remove the cruise line designated

Note: some equipment doesn't fully support all function, depending on the specific yuntai equipment and different.

3.9 Alarm control

【Set Alarm】Selection need protection channel, click confirm corresponding channel after in protection status

【Clear Alarm】Remove protection condition, not alarm input to react

【 Alarm Output 】 Open the alarm output.In the premise of no trigger alarm input,user can operate the output.for

example, some alarm switch is connected with a lamp,lamp is open when alarm is trigered

【All】Can choose all the channels

3.10 Display Adjust

(1)

Video

【Video Effect】Optional: standard, downy, sharp, custom.

【Default】Restoring default effect, for custom video effects, copy standard effect parameters.

Through the slider fluctuation sliding, respectively adjustable brightness, contrast and saturation, tonal, etc.

(2)Monitor

【Device】Optional: VGA output, TV output etc display output device.

【Default】Restoring default display parameters.

Through the slider fluctuation sliding, respectively adjustable brightness, contrast and saturation, tonal, etc.

(3)Setup

【Device】The first generation of DVR’s optional: VGA output, TV output etc display output devices, the system may

support multiple equipment and output.

The second generation of DVR’s optional:VGA Output+HDMI Output、TV Output.

【Resolution】Setting the resolution of the display device.

The first generation of DVR default VGA resolution is 1024 x 768;

The second generation of DVR default VGA resolution is 1280 x 1024;

Chapter Four Menu Operation Guide

4.1 Recording Setup

(1) Recording Setup

【Channel】Choose the need to install passage "whole" says setting all channels.

【Image Size 】 CIF/HALF D1/D1,if the model is 960H,the encoding format maybe is 960H/D1/CIF,if the model is

1080P,the encoding format maybe is 1080P/720P, different models,different encoding format

【Encoding Mode】Including fixed bitrate, dynamic bitrate.

【Image Quality】Client-side image quality, the higher the quality the clearer. Choice scope: minimum, low, general,

high, highest

【Frame Rate】Can click on the button manually input, 1 ~ 25 frames per second (PAL) or 1 ~ 30 frames per second

(NTSC) continuous adjustable.【Audio】Can select close, open according to requirements

【Pre-Alarm Rec】Can select close, open according to requirements

(2)Channel Overlay

【Channel】Choose the need to install passage "whole" says setting all channels.

【Channel Name】Can manual corresponding input channel's name

【Channel Display】Can choose according to the requirements of users don't use, the top-left corner, left, lower,

middle and downward, upper, right, and lower.

【Time Display】Can choose according to the requirements of users don't use, the top-left corner, left, lower, middle

and downward, upper, right, and lower.

(3)Recording Schedule

【Channel】Choose the need to install passage "whole" says setting all channels.

Each longitudinal row of every seven days a week, said the 24 hours a day manipulated said, mouse the left key

click on the small square footage, setting time to clean it has chosen right-click drag video time.

4.2 Camera

When the system starts the camera will detect the format of video

(1) PTZ Setup

【Channel】Choose regional channels, yuntai Settings "whole" says setting all channels

【PTZ Protocol】Yuntai equipment communication protocol

It contains these options:Pelco_D、Pelco_P、LILIN、MINKING、STAR、VIDO、NEON、DSCP、HY、N-control、

RM110、SAMSUNG，the default option is Pelco_D.

★Note:

yuntai parameter Settings every channel need after completion in Settings of gc1318 alone.

【PTZ Address】Yuntai equipment address, digital range 0 to 255.

★Note: here with the address must be consistent ball machine address, we can't control the ball machine.

【Bit-rate】Yuntai equipment baud rate.

(2)Video Setup

【Video Mode】Provide PAL and NTSC both formats video formats choice, modify after you must restart your system

can take effect.

【Channel】Choose to set the video Settings area passage "whole" says setting all channels

【Reserved Section】Click Settings enter. The white areas for privacy area

【Buzzer Alarm】Happen when video lost choice whether or not to allow buzzer warning

【Alarm Output】Happen when video lost upcoming linkage selected channel corresponding alarm output

(3)Motion Detection

【Channel】Choose need to set up mobile testing area passage "whole" says setting all channels

【Sensitivity Setting】Can be set to give: minimum, low, general, high, highest

【Detection Area】Click Settings enter.

Green area for dynamic test, grey areas design.ferroconcrete-brick undefended area for. Press the mouse left key to

drag on the lower detection area to the right, press the mouse button clearance. Detection area drag The save and

exit button can save Settings, some give up and quit button abandon modification.

【Buzzer Alarm】Occur when dynamic test on the buzzer whether to allow the alarm

【Trigger Recording】That will happen when dynamic test on the linkage of selected channel fast ball trigger video

【Alarm Output】In this passage setting user can be copied to the other channels, fulfill the same dynamic detection

alarm Settings

4.3 Network Setup

(1)General Setup

【DHCP】After checked automatic assignment device will get IP address, subnet mask, the default gateway, the DNS

server, etc

【UPnP】Can choose according to the requirement

【IP Address】Network logic address can according to the requirements set

【Subnet Mask】Server subnet mask

【Default Gateway】Server gateway

【DNS Server】DNS server addresses

【Server Port】Data port, initial socket for 7777

【HTTP Port】the default port for 80. If change, when using IE browser, need to monitor the IP address, adding new

socket. If use IP address to 82, from the original browsing http://192.168.0.19, change for http://192.168.0.19:82.

【Handset Port】Network phones socket, initial socket for eight thousand eight hundred and eighty eight

(2)Dial-UP Setup

Tip: PPPoE dial-up successful, according to 【 PPPoE IP 】 shown on IP address, users can remote access

hard disk video recorder. By nic LAN IP access.

The dvr support model：

Unicom：huawei E173,zhongxing MF100

Telecom:huawei EC150.huawei EC156.zhongxing MF583

“3G DIAL” have two modes with automatic and manual dialing, the operation follows as below.

1. Automatic Dialing

Select the Automatic Dialing in the interface of the following picture, fill the right information according to the

operator where the 3G card belongs to and the 3G referred guide, It includes IPS names, AP, dial-telephone, ID and

password, the interface shows as the other following picture (some IPS once be chosen, the other relative

information has been already done, so you needn’t fill any more, click “SAVE” directly). Then click “Save” directly.

After having detected the 3G signal when DVR start, the system will dial up automatically.

2. Manual Dialing

In the interface of following picture, users would fill the right information in the menu bar as same as

Automatic dialing and click “SAVE”. Then click “Dial-up” after saving successfully (The referred information

would be saved still after the DVR restart, but you should click “Dial-up” again).

In these two modes, if the dial-up want success, first you should make sure that the 3G card is available. Since

the 3G signal has been existed, the related menu bar will show the correct IP address; if failed, system will popup a

window to show the wrong information.

(3)DDNS Setup

【 DDNS Service 】 Dynamic DNS provider website, Via DDNS server, it compatible with

SODDNS,ANYVISION,PANSIM, DYNDNS.ORG.if you select soddns, you can customize your favorite domain

name.it shows as following picture.

【DDNS Domain】Dynamic domain name, soft keyboard and hard keyboard can be input.

【DDNS Account】Login domain name service provider website user name

【DDNS Password】Login domain name service provider website password

Tip: through the dynamic DNS server. Support dynamic DNS.

(4)Email

【SSL Protocol】Sending E-mail in use safety network connection

【Test Email】Send an email to the recipient mailbox test

【Email Address】The recipient's email address. Users can input two different email address.

【Send Email】The sender email address .

【SMTP Server】Send mailbox mail server

【Email Account】The sender email address the corresponding account

【Email Password】The sender email address of the corresponding email password

According to the customer request can be checked 【Video Setup 】and 【 Motion Detection 】 sending emails.

Two can also choose.

Note: your sender email must support SMTP.

(5)P2P Setup

The specific operation of P2P, refer to the eighth chapter “ The cloud function”

(6)Access Control

【List Rule】According to the requirement to choose: don't use, allow access, refused to visit.

【Starting IP】Display IP address started section

【Ending IP】Display IP address end segments

【Add】On the basis of the need for added

【Delete】According to the need to delete

4.4 System Setup

(1)Time

【 System Language 】 Used in a remote remote device control more hard disk video recorder occasions, only in

remote controls address and hard disk video recorder Numbers identical to remote operation.

【Device Number】According to the requirement to select the time zones, has twenty six time zone for user Settings.

【Time Zone】Select the format the date is displayed in including date, sun and moon June 21 years in three formats.

【Date Mode】To choose time display modes include 24-hour system and 12 hours to make

【System Date】The current system date

【System Time】The current system time

【Daylight-saving mode】According to the requirement to choose

【Set Time】Confirm modification system of time

(2)HDD Management

【Disk Full】When video disk full system how to deal with, "said system will be automatic coverage the earliest video

files continue covering video," stop video "says system to stop the current video.

【File Time】Says automatic generation video files interval, the set range 5-120 minutes.

【Recording Bit-rate】Said the total rate of current coding

【Recording Time】Said the storage devices systems installed in accordance with the current bitrate can store video

of time.

Display the current hard disk attributes: types, hard disk, usable capacity total capacity. Click [formatting ], all

storage file will be lost.

Tip: to format the hard disk before please stop system current all those videos.

(3)User Management

【User】Characters in length up to 8 bytes, ignore trailing Spaces. Can be letters, Numbers, and other symbols. The

user has the largest number of eight, user name may not be repeated.

【User Rights】According to the requirements set of functions need checked

【Add User】Input need to add user, and input the account password and passwords. According to save button to add

user.

【Delete User】Select the users need to delete, and click on the "yes" button to remove users

【Edit User】Choose need to modify user, and in user permissions bar needed under the function of check. According

to the save button modified users.

【Edit Password】 Select the account, input to modify current user password, and enter the account password and

confirmation password new. According to the save button for password changing. The password can be set to 0 ~ 8

bits

(4)Alarm Setup

【Alarm Input】Choose corresponding alarm channel, "all" setup all channel said.

【Input Type】Alarm input to often open/closed type choice (voltage output style)

【Clear Alarm】Stop the current alarm video and alarm output, but not removal, can again trigger alarm.

【PTZ Relate】When will the linkage happened alarm yuntai control

【Trigger Recording】When will trigger happened alarm selected channel video.

【Alarm Output】When will the linkage happened alarm corresponding alarm output

(5)Output Management

【Buzzer Output】In the chosen time intervals have alarm input will start buzzer output.

【Send Email】In the chosen time intervals have alarm input which will send relevant information, such as the alarm

events, paparazzi pictures, equipment name, device ID, etc sent to user specifies the mailbox.

【Alarm Output】In the chosen time intervals have alarm input will start alarm output

(6)Margin Adjust

By the function, you can adjust the distance between the display device and the picture edge.

4.5 System Management

(1)System Upgrade

Show the system hardware versions, software version, release dates. Click [software upgrade 】, the system

began to automatically detect and upgrade file.

Note: equipment currently support upgrades: local USB mode, IE mode, the client software.

USB mode: former ensure USB device to connect upgrade normal, as upgrade program has copy USB

devices in the root directory. According to the interface can upgrade operation hints.

Upgrade was successful, and the screen appears to restart operating hints. Equipment reboot after system that

will enable the new software.

(2)Log Search

【Date Search】Can search according to date

【Log Type】Optional: all, operation log, set diaries, alarm log, error log

Note: according to the left, right arrow can move forward and content.

(3)Default

Restoring default can restore selected according to need. The system restore to the default configuration state

out, can according to the menu options choose to restore the corresponding Settings.

Tip: menu color, language, time date format, video format, IP address, the user account, etc will not be

restored.

(4)Exception Handling

【Exception Type】Choose abnormalities: hard disk full, hard disk errors, network connection.

【Buzzer】When abnormality, choose whether to allow the buzzer hints.

Chapter Five IE Preview

5.1 logging on interface

To input the IP address

Pretermission IP address is 192.168.0.20

5.2 System Settings

Point , As the picture ,You can set up language directory,After all to save you set.

5.3 State control

In state control you can set reboot server, close server , remote to go up

Remote upgrade: let PC file load in the system

Log: to inquire sometime the server’s action

Chapter Six Asee series phone software for use

6.1 Asee

This module has mainly instructions on the installation and usage in Android, Blackberry, iPhone mobile phone.

1) The acquisition of client software:

The client software can be got from the CD material equipped with CD , then choose English and select the options

supporting tools, finally choose the mobile phone monitoring or obtained from technical support. Each type of

corresponding client software as follows.

1. Asee.apk: The smart phone monitoring client of Android operating system

2. ASee.cod & ASee.alx: The smart phone monitoring client of BlackBerry operating system

3. ASee.sisx: The smart phone monitoring client of Symbian operating system

Notes：

 The mobile phone client of apple mobile phone system (iOS)can be directly searched for ASee+ in the appstore

and installed online.

 The mobile phone client of Android system can be directly searched for ASee+ in the Android market and

installed online.

2) The main functions of the program which is straight even version of current mobile phone monitoring are shown as

follows:

1. Browsing real-time video function. In addition to BlackBerry, it can support four pictures at the same time preview.

2. PTZ control function (the controlled ball machine is in front).

3) The instructions of three platforms is shown as follows.

1. Android

2. Blackberry

3. iPhone

4.Symbian

6.1.1 Instructions of Android

6.1.1.1 Essential condition

1) Support the version 1.5 or above of Android system.

2) Support DVR platform versions:

 Hisilicon v1.0.1.8 and higher.

 GRain v8.33 and higher.

6.1.1.2 Installation and operation instructions

1）Installation

Support two installation modes and the user can choose one way for installation.

1. Install online

Search ASee+ on google market and install online. As the below image shows:

2. Install offline

Copy the Asee.apk installation package to Android phone through cable. In the specified directory find out the

corresponding .apk, click the application installation (If there is not installed apk installer in the mobilke phone, the

user needs to download an apk installation software so that it can identify the apk package), and there will be

program icons after finishing installing. As the above image shows.

3）Click the program icon <Asee+>，the first screen after running is shown in the below image.

The functions of buttons show as follows:

Table 1-1

Function keys Definition Function specification

Play When the program connects with device, play video

Capture

Capture the current screen(the default save path: the default pictures

directory of mobile)

Settings

Set some information of the device, such as IP address, dynamic domain

name, port, username, password and device alias information.

About Some device information of the software

Previous group It can show the previous channels group.

Next group It can show the next channels group.

Select channel

Choose one video channel of the device. And cooperate with "next

group" can switch the 8 or 16 channels.

PTZ control PTZ direction control including up, down, left and right.

Zoom Zoom in/out control of PTZ.

Focal length Focal length adjustment of PTZ.

Aperture Aperture control of PTZ.

4）If it is first running or need to change the parameters, please click the <settings> button and enter the

<Device List> page, as shown in the below image.

In <device list>interface, click <Add> button and enter <settings> interface, as shown in the above image

Notes：

 <DVR Title>：It is convenient to identify among multiple devices.

 <Server>：The public IP address, dynamic domain name or LAN IP of DVR (The port should be mapping

before using public IP and mobile phones need to open wifi before using LAN IP).

 <Port>：The mobile port set in DVR（default parameter is 8888）.

 <User Name>：The username permitted to login the DVR（default username is ‘admin’）.

 <Password>：The password of the user (default password is empty).

 <Max Channel>: The actual channel numbers of DVR.

5）After finishing, click <OK>and enter the Device List page. As shown in the below image

Notes：

 <Back>：Back to the screen of previewing image.

 <Channel List>：It shows the corresponding DVR and the default channel list, the user can arbitrarily

choose a channel to preview image.

 <Information Edit>：Click this button and enter the “Settings” interface, you can editor delete the device

information, as shown in the above image

6）Complete settings, choose channel to preview, and the preview function include two modes: common mode and

full screen mode.

1. Common mode is shown in the below image

2. Full screen mode is that when mobile phone lay down horizontally it will automatically switch to full screen mode,

as shown in the above image

7）Channel switch function

Select some channels in the Device List interface, the program will automatically switch to the Preview Interface and

open the corresponding channel preview in Preview Interface. Program displays the default 1 ~ 4 channels, if the

user clicks the channel button of Next Group in the Preview Interface, the channels group will switch to 5 ~ 8,

8 ~ 12, 12~16 and circulation switch. As shown in the below image

6.1.2 Instructions of Blackberry

6.1.2.1 Essential condition

1) Support the version 4.6 or above of Blackberry system, and mobile phone screen resolution is 480*360 and

480*320. Support 8900, 9000, 9700, 9630, 9900 of Blackberry.

2) Support DVR platform versions:

Hisilicon v1.0.1.8 and higher. GRain v8.33 and higher§2.2 Installation and operation instructions

6.1.2.2 installation

1）Install ASee. cod and ASee. jdp installation package into Blackberry handset through the desktop manager,

as shown in the below image.

2）Click the options on mobile phone desktop and enter the interface of the above image.

3) <Asee> permission settings

a. Click <application program> to find out <Asee>；

b. Click the icon of <Asee> and enter the permission settings.

c. Click <edit permissions>, set all permissions <permit>.

Note：Some permissions can not be set <permit>( the gray options mean cannot change this option), and

click “save”.

4）Enter the initial interface

Click the program icon <Asee>, after running procedure there will be an welcome page, then enter the initial

interface, as shown in the below image.

Notes：

<Title>：It is convenient to distinguish between multiple devices.

 <Address> ： The public IP address, dynamic domain name or LAN IP of DVR (The port should be mapping

before using public IP and mobile phones need to open wifi before using LAN IP).

<Port>：The mobile port set in DVR（default parameter is 8888）.

<Channel total>：The actual channel number of DVR.

<User ID>：The username owens view permissions of mobile phone（default username is admin）.

<Password>：The mobile phone port of DVR (default password is empty).

<Network type>：Choose the network type that you need.

The corresponding functions of buttons show as follows:

Function keys Definition Function specification

Enter the playing interface, and the program will connect with device and

begin to play video

exit Exit the program

Device list Enter the device list interface.

5) Click <login>, play the main interface, as shown in the below image.

The corresponding functions of buttons in <Main interface> show as follows:

Function keys Definition Function specification

Play When the program connects with device, play video

Full screen Play full screen.

Capture

Capture the current image (the default save path: the default pictures

directory of mobile)

About Some device information of the software.

Next group It can select the next channels group (1-4、4-8、8-16) or PTZ control.

Select channel

Choose one video channel of the broadcasting device and select any

one of 8 channels.

Up control of PTZ The up direction control of PTZ.

Down control of PTZ The down direction control of PTZ.

Left control of PTZ The left direction control of PTZ

Right control of PTZ The right direction control of PTZ

Zoom in The zoom in control of PTZ.

Zoom out The zoom out control of PTZ.

Focal length + Amplify the focal length of PTZ.

Focal length - Lessen the focal length of PTZ.

Aperture + Amplify the aperture of PTZ.

Aperture - Lessen the aperture of PTZ.

6) Exit the application program

Click the button <Exit> and exit the program, as the below image shows.

7) Edit the <Device List> interface

1. Click the <Device List>and enter <Device List> interface, as shown in the above image.

2. Click the <menu> button and enter the <device edit> interface, as the below image shows.

The corresponding functions of buttons in < device edit> interface show as follows:

Menu definition Function specification

Set to real-time preview When the program connects with device, play video.

New Device Create a new record.

Edit Edit record.

Delete Delete the selected record.

Delete All Records Delete all records.

Shutdown Shut down the program.

6.1.3 Instructions of iPhone

6.1.3.1 Essential condition

1) Support the version iOS 3.0 or above, and mobile phones includes iPhone, iPod, touch etc.

2) Support DVR platform versions:

 Hisilicon v1.0.1.8 and higher.  GRain v8.33 and higher§2.2 Installation and operation instructions

6.1.3.2 Installation and operation instructions

1）Run the App Store program of iPhone

Switch to the search tag page, and input Asee + in the search box to find the application installation package, then

click <install> .After finishing installation, there will be Asee + program icon on the mobile phone desktop, as shown in

the below image.

2）Click the program icon Asee+ and the initial interface after running procedure is shown in the above image.

The corresponding functions of buttons show as follows:

Function keys Definition Function specification

Stop

playing

When the program disconnects with device, stop playing the video.

Capture

Capture the current image (the default save path: the default pictures

directory of mobile).

Settings

Set some information of the device, such as IP address, dynamic domain

name, port, username, password and device alias information.

Channels group switch It can switch to next channels group.

About Some device information of the software.

Select channel

Choose one channel video of the broadcasting equipment. And cooperate

with "next group " can achieve the switch of 8ch and 16ch.

PTZ control PTZ direction control including up, down, left and right.

Zoom Zoom in/out control of PTZ.

Focal length Focal length adjustment of PTZ.

Aperture Aperture control of PTZ.

3）Initial usage of need to change the parameter

1.Please click the settings button and enter the device manage interface, as shown in the below image.

2.Then select Add button and enter device add interface, as shown in the above image.

Notes:

<Device Name>：It is convenient to distinguish between multiple devices.

<Address>： The public IP address, dynamic domain name or LAN IP of DVR (The port should be mapped

before using public IP and mobile phones need to open wifi before using LAN IP).

<Port>：The mobile phone port set in DVR（default parameter is 8888）.

<User ID>：The username permitted to login the DVR（default username is ‘admin’）.

<Password>：The password of the user (default password is empty).

<Max Channel>：The actual channel number of DVR.

3.After finishing, click <OK>, enter <Device Manage> interface. As shown in the below image.

4.In the <Device Manage> page, click the <back> button, enter the <add channel> interface, then click the <+>

button , as shown in the above image.

5.Click the <+> button , and switch automatically to <Device List>, as shown in the below image.

6.Click the button to view all channel numbers, as shown in the above image.

7.Double click any channel, then switch to the <channel preview> interface to preview channels, it can support four

channels previewing at the same time, as shown in the below image.

8.Click the <settings> button enter the <Device Manage> interface, as shown in the above image. The user

can edit, modify and delete device information by clicking the corresponding icon or slipping the item.

（1）Click the <edit> button enter <parameter modifying> interface, as shown in the below image.

（2）Slide rightly the <edit> button to delete the information. As shown in the above image.

4）Video display mode

There are two modes: common mode and full screen mode

Switch: when the mobile phone lay down horizontally it will automatically display full screen.

common mode full screen mode

5）Channel switch function

Select some channels in the Device list interface, the program will automatically switch to the Preview Interface and

open the corresponding channel preview in Preview Interface. Program displays the default 1 ~ 4 channels, when

elected the channel <Channel switch> button in the <preview interface>, the channels group will switch to 5

~ 8, 8 ~ 12, 12~16 and circulation switch. As shown in the below image.

6.1.4 Instructions of Symbian

6.1.4.1 Essential condition

1) Support the version OS S60 or above of Symbian system.

2) Support DVR platform versions:

 Hisilicon v1.0.1.20 and higher.

 GRain v8.42 and higher.

6.1.4.2 Installation and operation instructions

Installation

Support two installation modes and the user can choose one way for installation.

1.Install online

Search ASee on google market and install online.

2.Install offline

Copy the Asee.sisx installation package to Symbian phone through cable. In the specified directory find out the

corresponding .sisx, click the application installation (If there is not installed apk installer in the mobile phone, the

user needs to download an apk installation software so that it can identify the sisx package), and there will be

program icons after finishing installing. As the following figure shows.

2）Click the program icon <Asee>，the first screen after running is shown in the following figure

click PTZ show as the following figure

The functions of buttons show as follows:

Function keys Definition Function specification

Play/pause When the program connects with device, play video

capture

Capture the current screen(the default save path: the default pictures directory

of mobile)

settings

Set some information of the device, such as IP address, dynamic domain name,

port, username, password and device alias information.

Full screen For this channel full screen.

pervious/next Pervious to the former channel,next to the latter channel

exit quit current software

Select channel

Choose one video channel of the device. And cooperate with "next group" can

switch the 8 or 16 channels.

Ptz PTZ

PTZ control PTZ direction control including up, down, left and right.

zoom Zoom in/out control of PTZ.

Focal length Focal length adjustment of PTZ.

Aperture Aperture control of PTZ.

3）If it is first running or need to change the parameters, please click the <settings> button and enter the

<Device List> page, as shown in the following figure:

Notes:

1)<server address>：The public IP address, dynamic domain name or LAN IP of DVR (The port should be mapped

before using public IP and mobile phones need to open wifi before using LAN IP).

2)<port>：The mobile phone port set in DVR（default parameter is 8888）.

3)<uer ID>：The username permitted to login the DVR（default username is ‘admin’）.

4)<password>：The password of the user (default password is empty).

5)<alias>：the record’s name

After entering the above information, identify and select play.

图 6-79

Chapter Seven Instructions of imac

7.1 Essential condition

1)Support the version OS X 10.6.3 or above of imac system.

2)Support DVR platform versions:

a) Hisilicon v1.0.1.20 and higher.

b) GRain v8.42 and higher.

7.2 Installation and operation instructions

One method:

To unzipped the Asee.app in windows xp os, copy it to the mac machine.and then you will find the icon.

The other method:

Download from App Store,Search for Asee ,find the corresponding program installation package (Asee.apk

installation package), install online.After finishing installation, as the following figure shows:

7.2.1 operation instructions

After installing,click Asee icon to work.

Log on the main menu interface,as the following figure shows

main menu interface

After loading，enter default main menu interface,buttons instruction as show below:

buttons instruction

Button icon corresponding definition function introduction

single picture Single picture shows video channel

4 pictures 4pictures show video channels

disconnect disconnect single picture of connection

disconnect

disconnect all pictures of connection

Capture

Capture the current image (the default save path: the default

pictures directory of mobile).

full screen

Picture full-screen

add add device

delete Delete device

modify Modify device

Switch pictures on Imac platform，click view->scream mode on the top of the screen to switch pictures from 1/4/9/16，

as the following figure shows:

picture switch

First login ,preview interface is empty, need to set parameters and add device,after adding device, can preview,

configuration, modify or delete equipment information ect.

click “add ”,pop-up a message box as shown in the follong figure:

add device

The current message box shows the need to enter five information: device name、IP address、port、user ID and

password.

Device name:the name of monitor device,help you distinguish between multiple devices

IP address：The public IP address or dynamic domain name of DVR(here the address must be internet address)

port：The mobile phone port set in DVR，default parameter is 8888

User name：default username usually to be ‘admin’,can be set according to the DVR .

Password：:admin user’s default password is empty，can be set according to the DVR.

add device

after inputting above information ， click“ok”.enter main menu interface,click a picture,after appearing green

frame(as shown window 1 in picture below),click a channel on right channel column(such as channel 1 ),connect

play，as shown in the following figure

connection play interface

If there is error device information above,click to modify or click ,add the device again.

Note：Asee on Imac platform can only add one device,and there is no PTZ control function.

Chapter Eight The Cloud funtion

8.1 DVR Setup

1.Main MenuNetwork SetupP2P Setup

Click the button”Registration”

If there is no network, it will prompt”Registration failure”;

If you have access to the Internet, it will prompt " registration is successful!”;

Click the button “OK”.If success,you will see the following picture.

Note:If use the function of P2P, you’d better not use the function of “DHCP”,At the same time to ensure that the IP

address is a network IP address , and different with the others..

8.2 PC Setup

1.Opne IE, type http://www.soddns.com in the address bar, and then press enter.

If this is the first landing, you should download the control according to your pc system. If the system is xp, click

the button “XP DownLoad”; if the system is windows 7,click the button “Win7 DownLoad”. Or let your pc to test and

download itself, this maybe takes much more time.

The detail of it

Click the button “Run” or “save”;

Click the button “Run”;

Click the button “Next”;

Click the button “Install”;

Click the button “Finish”;

Note: If finish, you should reboot the pc.

★Domain Name /Device ID：you can look up the device id of this dvr ,above device’s id is 10257027; ★Net Port：5050; ★DVR Username：admin; ★Password：null;

Note:the username and password are the same as the local DVR’s

2.Type the information, and then click the button”login”;

If you want to view all the channel ,you can view one by one ,or view all the channel by click the button”start”;

8.3 The other operation of PC

8.3.1 User Login

(1) local login

★ Logout: logout the current user

★ Cancel:cancel the operation

(2) cloud login

★ Username: The account can manage multi device ID

★ Password: Manage user password

★ Auto-login: when you select this option, open www.soddns.com, automaticlly login

★ Regist: Here you can get the account, the user can follow the prompts to register

Registration page

Successful registration information

8.3.2 Server List: shows the currently logged in equipment

8.3.3 Device Manager

★ DEVICE NAME: The name of the device

★ NET ADDRESS: Enter the ID of the device

★ NET PORT: Default 5050

★ MOB PORT: Default 8800

★ DEV PORT: Default 5040

★ USER: Default admin

★ PASSWORD: Default null

★ DEVICE TYPE: According to the actual type of the device,such as DVR

★ CHN COUNT: The number of channels

8.3.4 Remote Control:control the PTZ

8.3.5 Remote Output Control

8.3.6 Remote Color: you can adjust the color of each channel,you will see it in the following picture

★Default: Set the current color to the initial values

8.3.7 Remote Playback

★Type: it include “All”,”Manual”,”Auto”,”Alarm” ★Chn: slecet the playback channel ★Search: search the files and display the results ★Hide: hidden the file directory ★Show FileList: shows the last retrieved file derectory

★Playback: double click the file, and then playback ★Backup: In the file list, select one file, click the right mouse, then click backup, it will pop-up “Save as ”

dialog.

8.3.8 Window Select:you can switch between the single-screen, four, nine, siteen images

8.3.9 Taskbar

Chapter nine The use of P2P phone software Nvplayer

This manual has mainly instructions on the installation and usage in Android and iPhone mobile phone.

1) The acquisition of client software:

The client software can be got from the CD material equipped with CD . Each type of corresponding client software

as follows.

a) NVPlayer.apk: The smart phone monitoring client of Android operating system

b) NVPlayer.ipa: The smart phone monitoring client of IPhone operating system

2) The main functions of the program which is straight even version of current mobile phone monitoring are shown as

follows:

1.Browsing real-time video function.

3) The instructions of two platforms is shown as follows.

1. Android

2.IPhone

9.1 instructions of Android

9.1.1 Essential condition

1) Support the version 1.5 to 4.2 of Android system.

2) Support DVR platform versions:

a) The first generation of the dvr : V1.0.1.51 and higher.

b) The second generation of the dvr : V2.0.0.40 and higher.

9.1.2 Installation and operation instructions

Installation

Now can support two installations mode for installation.

1. Install offline

Copy the NVPlayer.apk installation package to Android phone through cable. In the specified directory find out the

corresponding .apk, click the application installation (If there is not installed apk installer in the mobilke phone, the

user needs to download an apk installation software so that it can identify the apk package), and there will be

program icons after finishing installing. As the following picture shows.

2. Install online

Search Nvplayer on google market and install online. As the following picture shows:

1）Click the program icon <NVPlayer>，the first screen after running is shown in the following picture.

Notes：

 <Add>: Here you can add multiple devices.

 <Edit>：Here you can edit the devices,such as delete one device in the server list.  <Login>：Some devices landing.

 <Search>：Search mobile devices within the lan, currently only supports searching IPC.

 <Server List>：Display the current list of the servers that have been added.

2) In <server list>interface, click <Add> button and enter <Add Device> interface, as shown in the

followong picture.

Notes：

 <Name>：Name easy to distinguish multiple devices,name can be the same as the server.

 <Server>：In the P2P interface of the DVR, click the button “registration”, it will create one device ID, you can

copy the ID to here.

 <Port>：The default port is 8800,do not modify.

 <User Name>：The username permitted to login the DVR（default username is ‘admin’）.

 <Password>：The password of the user (default password is empty).

3) Setting is completed, click <Save> button,you will see the Server list interface.

4) Click one of them, it will show the following picture.

The functions of buttons show as follows:

Function keys Definition Function specification

Pause When the program connects with device, pause video

Esc Go to the previous level.

Previous group It can show the previous channels group.

Next group It can show the next channels group.

Select channel

Choose one video channel of the device. And cooperate with "next

group" can switch 5-8,9-12,13-16 and so on.

9.2 instructions of iPhone

9.2.1 Essential condition

1)Support the version ios4.3 to ios6.1 of IPhone system.

2)Support DVR platform versions:

a) The first generation of the dvr : V1.0.1.51 and higher.

b) The second generation of the dvr : V2.0.0.40 and higher.

9.2.2 Installation and operation instructions

Installation

Now can support two installations mode for installation.

1. Install offline

Copy the NVPlayer.ipa installation package to Iphone mobile through cable. In the specified directory find out the

corresponding .ipa, click the application installation, and there will be program icons after finishing installing. As the

following picture shows.

2. Install online

Run the App Store program of iPhone.

Switch to the search tag page, and input Nvplayer in the search box to find the application installation package, then

click <install> .After finishing installation, there will be Nvplayer program icon on the mobile phone desktop, as shown

in the above picture.

1）Click the program icon <NVPlayer>，the first screen after running is shown in the following picture.

Notes：

 <Add>: Here you can add multiple devices.

 <Edit>：Here you can edit the devices,such as delete one device in the server list.

 <Login>：Some devices landing.

 <Search>：Search mobile devices within the lan, currently only supports searching IPC.

 <Server List>：Display the current list of the servers that have been added.

2) In <server list>interface, click <Add> button and enter <Add Device> interface, as shown in the

following picture.

Notes：

 <Name>：Name easy to distinguish multiple devices,name can be the same as the server.

 <Server>：In the P2P interface of the DVR, click the button “registration”, it will create one device ID, you can

copy the ID to here.

 <Port>：The default port is 8800,do not modify.

 <User Name>：The username permitted to login the DVR（default username is ‘admin’）.

 <Password>：The password of the user (default password is empty).

3) Setting is completed, click <Save> button,you will see the Server list interface.

4) Click one of them, it will show the following picture.

The functions of buttons show as follows:

Function keys Definition Function specification

Pause When the program connects with device, pause video

Esc Go to the previous level.

Previous group It can show the previous channels group.

Next group It can show the next channels group.

Select channel

Choose one video channel of the device. And cooperate with "next

group" can switch the 9 to 16 channels.

Chapter Ten FAQ (Frequently Asked Questions)

01：Why the DVR did not run after connect the power supply?

①Please check the power switch turn on or off at the rear panel of DVR.

②Please check if the turn on DVR operation correct or not?

③If you select the adaptor +12V, 5A or above? (8ch 5A, 16ch 220V 200W)

02：Still stop over on the boot-strap frame?

Physical damaged in hard disk drive

Boot manager abnormal.

03：Why does appear the boot running too slow?

①There are too much capacity data in hard disk drive, the system will automatic search the data when

the system boot up, caused the boot running slow.

② The hard disk drive error will cause the system research the data repeatedly, caused the boot

running slow.

04：Why does the system reboot repeatedly?

①Check the hard disk drive, if there is not the FAT32 formatted in it or the problem in it and caused the

DVR reboot;

②Please check the power supply of DVR, if you installed a lot of hard disk drive, it may be reboot

repeatedly underpower;

③ Please pull up the network cable, then to check the DVR can work normally or not, being the

catastrophe failure in network,

it will cause the DVR reboot repeatedly;

05：Why does the system halted of DVR during the playback and search the video file information in progress?

Please check if you install the hard disk drive or if the drive is ok or not? Please replace the good one

for it soon;

If the ambient temperature on the high side or not? Is there any heaven current installation surrounding and external video device, heavy current surging

video cable, caused the DVR can not work properly and the system halted;

06：Firmware upgrade failure?

U drive is not good compatible with the DVR, cause the DVR can not detected it, suggested to try one

or two more different kind of U drive in the market;

USB interface is not good;

The voltage hunting fearfulness during the system firmware upgrade in progress;

07：Why the display color is black and white in TV and VGA monitor?

Check the video system is it matching the video input, DVR, TV or VGA monitor, if there is not on all

fours, please set the video system mode in auto automatic recognition;

08：Why does nothing display on the TV or VGA monitor?

①please make sure if the power supply of TV or VGA monitor turn on or not; if the illumination located

in the lowest status?

②if the video connected with TV or VGA monitor properly? Check if there is any video signal input?

And make sure the line faulty or not?

09：Why does the video like water wave, to appear obstruction distortion?

①if there is short circuit, open circuit or insufficient solder and connection failure of video cable? ② If the video cable obstruction by high voltage interference, please separate the video and high

voltage in linkup cabling, at the meantime, please select the better quality, shield video cable for the project;

③In the whole system, only select the central point to grounding, please do not multi port to grounding,

then, cause the common mode obstruction, please connect the screw in DVR rear panel to grounding;

④Check if there is the become old problem in the camera or TV monitor and cable?

10：Why do the color of live video and record video data distortion?

①Make sure the input and output video parameter of main menu setting correct;

②Make sure the connection is correct;

11：Why does the video skew became deformed, color cast?

①Make sure the VGA cable and DVR be connected with grounding properly; ② The DVR working atmosphere temperature high, or no good in radiating, cause the VGA chipset

working exceptional, or the mention circuit parameter is abnormal;

12：Why does the record video playback in mosaic under local DVR?

①The recording parameter setting is too low cause the record video quality overall down, sometime

appears to mosaic;

②The record video file locates where there is a bad sector in a hard disk drive, it will cause the mosaic

raising;

Postscript 1

D1、CIF models Product parameter Table

4CH 8CH 16CH 24CH 32CH

Compress

standard

H.264 baseline profile@L3.1

Video in

BNC

（1.0Vp-p/75Ω）

BNC

（1.0Vp-p/75Ω）

BNC

（1.0Vp-p/75Ω）

BNC

（1.0Vp-p/75Ω）

BNC

（1.0Vp-p/75Ω）

Video out

1TV BNC

（1.0Vp-p/75Ω）/

1VGA

1TV BNC

（1.0Vp-p/75Ω）/

1VGA

1TV BNC

（1.0Vp-p/75Ω）/

1VGA

1TV BNC

（1.0Vp-p/75Ω）/

1VGA/1HDMI

1TV BNC

（1.0Vp-p/75Ω）/

1VGA/1HDMI

Picture standard

PAL(704×576)，

NTSC(704×480)

PAL(704×576)，

NTSC(704×480)

PAL(704×576)，

NTSC(704×480)

PAL(704×576)，

NTSC(704×480)

PAL(704×576)，

NTSC(704×480)

resolution ratio

1024x768/800x

600/1280x1024

1024x768/800x

600/1280x1024

1024x768/800x

600/1280x1024

1024x768/800x

600/1280x1024

1024x768/800x

600/1280x1024

Record encoded

D1/HD1/CIF D1/HD1/CIF D1/HD1/CIF D1/CIF CIF

Record play

4ch 8ch 16ch 24ch 32ch

Roll rate

PAL:1~25P/S；

NTSC:1~30P/S PAL:1~25P/S；

NTSC:1~30P/S

Audio in

RCA×4 RCA×4/RCA×8 RCA×4/RCAX16 RCA×8 RCA×8

Audio out

RCA×1 RCA×1 RCA×1 RCA×1 RCA×1

Audio encoded

ADPCM ADPCM ADPCM ADPCM ADPCM

Audio encoded

rate

32Kbps 32Kbps 32Kbps

32Kbps 32Kbps

Alarm In

4E 4E 4E/8E/16E 16E 16E

Alarm Out

1CH 1CH 1CH/4CH 2CH 2CH

Record mode

Manual record，

motionrecord and

externa alarm

Manual record，

motionrecord and

externa alarm

Manual record，

motionrecord and

externa alarm

Manual record，

motionrecord and

externa alarm

Manual record，

motionrecord and

externa alarm

record record record record record

Mult mode

Record，Play，

Internet

Record，Play，

Internet

Record，Play，

Internet

Record，Play，

Internet

Record，Play，

Internet

Hd interface

HDMI:

1080P(1920*108

0) HDMI:

1080P(1920*108

0) HDMI:

1080P(1920*108

0) HDMI:

1080P(1920*108

0) HDMI:

1080P(1920*108

Network

interface

RJ45(10M/100M) RJ45(10M/100M)

RJ45(10M/100M/

1000M)

RJ45(10M/100M/

1000M)

RJ45(10M/100M/

1000M)

Mobil platform

ASEE: symbian、Android、iphone、Blackberry and so on;

Nvplayer：Android,iphone and so on.

RS485

PTZ control PTZ control PTZ control PTZ control PTZ control

Communication

port

RS485×1，

USB2.0×2

RS485×1，

USB2.0×2

RS485×1/2，

USB2.0×2

RS485×1/2，

USB2.0×2

RS485×1/2，

USB2.0×2

Hard Disc

SATA×1/2

（maximum 4T）

SATA×1\2

（maximum 4T）

2/4SATA

（maximum 4T）

2/4SATA

（maximum 4T）

2/4SATA

（maximum 4T）

USB interface

Usb mouse，Usb

disc backup、usb

mobile hard disk

Usb mouse，Usb

disc backup、usb

mobile hard disk

Usb mouse，Usb

disc backup、usb

mobile hard disk

Usb mouse，Usb

disc backup、usb

mobile hard disk

Usb mouse，Usb

disc backup、usb

mobile hard disk

Remote control

Yes Yes Yes Yes Yes

Power adapter

12V/3A /4A DC

（according to

the sum of

DISK ）

12V/3A/4A DC （according to

the sum of

DISK ）

12V/4A /6ADC

（according to

the sum of

DISK ）

12V4A/6ADC

（according to

the sum of

DISK ）

12V4A /6ADC

（according to

the sum of

DISK ）

Working

temperature

0℃～+60℃ 0℃～+60℃ 0℃～+60℃

0℃～+60℃ 0℃～+60℃

Working

humidity

10%～90% 10%～90% 10%～90%

10%～90% 10%～90%

Product size

（mm）

330x250x50mm （according to

the sum of

DISK ）

330x250x50mm （according to

the sum of

DISK ）

380x300x55mm （according to

the sum of

DISK ）

440*360*70mm

（according to

the sum of

DISK ）

440*360*90mm

（according to

the sum of

DISK ）

Product weight

2.6（without

3.0（without

3.46（without

3.52（without

100

（Kg）

disc） disc） disc） disc） disc）

Postscript 2

960H Model Product parameter Table

4CH 8CH 16CH

Compress

standard

H.264 baseline profile@L3.1

Video in

BNC（1.0Vp-p/75Ω） BNC（1.0Vp-p/75Ω） BNC（1.0Vp-p/75Ω）

Video out

1TV BNC（1.0Vp-p/75Ω）/

1VGA

1TV BNC（1.0Vp-p/75Ω）/ 1VGA

1TV BNC（1.0Vp-p/75Ω）/

1VGA

Picture standard

PAL(960×576)，

NTSC(960×480)

PAL(960×576)，

NTSC(960×480)

PAL(960×576)，

NTSC(960×480)

resolution ratio

1024x768/800x

600/1280x1024

1024x768/800x

600/1280x1024

1024x768/800x

600/1280x1024

Record encoded

960H/D1 /CIF 960H/D1 /CIF 960H/D1 /CIF

Record play

4ch 8ch 16ch

Roll rate

PAL:1~25P/S；NTSC:1~30P/S

Audio in

RCA×4 RCA×8 RCA×4

Audio out

RCA×1 RCA×1 RCA×1

Audio encoded

ADPCM ADPCM ADPCM

Audio encoded

rate

32Kbps 32Kbps 32Kbps

Alarm In

4E 4E/8E 4E/8E/16E

Alarm Out

1CH 1CH 1CH/4CH

Record mode

Manual record，motionrecord

and externa alarm record

Manual record，motionrecord and

externa alarm record

Manual record，motionrecord

and externa alarm record

Mult mode

Record，Play，Internet Record，Play，Internet Record，Play，Internet

Galleon VCSDVR-HDCVI4, VCS-HDCVI User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual