Thank you for choosing the Galaxy Audio professional, lightweight, compact, portable XLR Bluetooth 5 ®®
Receiver. The JIB/BT5R interfaces high quality stereo Bluetooth audio wirelessly from a Bluetooth ®®
enabled smart device to an active speaker or mixing console using an XLR line output. You have joined
the ranks of countless satisfied customers. Our years of professional experience in design and
manufacturing ensure our products’ quality, performance and reliability.
1
! IMPORTANT SAFETY INSTRUCTIONS !
READ these instructions.
1.
KEEP these instructions.
2.
HEED all warnings.
3.
FOLL OW all instructions.
4.
DO NO T use this apparatus near water.
5.
CLEA N ONLY with dry cloth.
6.
DO NO T block any ventilation openings. Install in accordance with the manu-
7.
facturer's instructions.
DO NO T install near any heat sources such as radiators, heat registers, stoves,
8.
or other apparatus (including amplifiers) that produce heat.
DO NO T defeat the safety purpose of the polarized or grounding-type plug. A
9.
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wider blade or the third
prong are provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
System Components
Safety
PROT ECT the power cord from being walked on or pinched, particularly at plugs,
10.
convenience receptacles, and the point where they exit from the apparatus.
ONLY US E attachments/accessories specified by the manufacturer.11.
UNPL UG this apparatus during lightning storms or when unused for long periods of
12.
time.
REFE R all servicing to qualified service personnel. Servicing is required when the
13.
apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally, or has been
dropped.
DO NO T expose the apparatus to dripping and splashing. DO N OT put objects filled
14.
with liquids, such as vases, on the apparatus.
The JIB/BT5R include the following components:
JIB/BT5R Receiver (x2 in Dual JIB/BT5RS System)
Micro USB Charging Cable (x2 in Dual JIB/BT5RS System)
Quickstart Guide
1. MICRO USB INPUT: Connect the included micro USB charging link to recharge or supply power indefinitely.
2. POWER: Switch between ON/OFF to power the receiver on or off. The receiver is automatically in pairing mode when
powered on. If previously paired, it will remember the previous device after powering on.
3. PAD (0dB or -10dB): When plugged into Mic level input, the pad switch should be engaged.
4. CHARGE LED: The charge/battery indicator will flash blue quickly when battery is low.
When charging, the light will remain a solid blue.
Once fully charged, the LED indicator will turn off.
5. PAIR/STEREO-LINK Button: Pressing the PAIR/STEREO-LINK button on two receivers will allow them to connect to
each other. It can also be used to disconnect the 2nd receiver.
6. PAIR STATUS LED: Indicated when the receiver is in pairing mode, paired, and when music is transmitting to it.
7. XLR OUTPUT: Connect the receiver to your active loudspeaker, amp, or mixer XLR input.
3
Receiver Bluetooth Pairing and Unpairing®
Wireless Pairing Setup
1. Power On Receiver:
Flip the POWER switch to “ON”. The receiver will immediately be in pairing mode.
NOTE: The “PAIR” LED will quickly flash blue and red while unpaired.
®2. Ready Your Bluetooth Enabled Device:
Make sure your Bluetooth enabled device has its Bluetooth feature turned on and is within range.®®
3. Pair Your Bluetooth Enabled Device:®
Find the receiver (JIB/BT5R) in your device’s Bluetooth® settings to connect.
NOTE: Once paired, the “PAIR” LED will slowly flash blue.
4. Play Your Audio:
On your Bluetooth® device, start playing audio.
NOTE: While playing, the “PAIR” LED will remain a solid blue.
Stereo-Link Setup (Optional)
1. Pair Receivers:
To Stereo-Link, you must first pair the two receivers. Power on both JIB/BT5R receivers then press and hold both pair
buttons for 2 seconds, when paired both will flash blue quickly for a few seconds.
2. Linking Receivers to Smart Device:
Once paired one of the two receivers will blink between Red and Blue, this indicates it is ready to pair with your
Bluetooth device. In your Bluetooth enabled device, scan for devices and locate the JIB/BT5R. Tap it to connect to®®
the receivers.
Disconnecting Stereo-Link, Bluetooth Connection, and Changing Paired Device®
1. Disconnecting Stereo-Link:
To disconnect the Stereo Link, press and hold the “STEREO-LINK” button on either one receiver.
NOTE: The disconnected receiver will be the secondary that did not first pair with the Bluetooth® device.
The disconnected receiver’s “Pair” LED will alternate flashing between blue and red.
®2. Unpair From Your Bluetooth Enabled Device:
To disconnect, press the “PAIR” button. The status LED will alternate between blue and red, signaling that the
receiver is unpaired and ready to pair to a new device.
NOTE: The receiver will remember the previously connected device for the next use. You can play audio from that same
device. To use a different Bluetooth® enabled device, you will need to disconnect from the previous device first.
3. ®Pair Your New Bluetooth Enabled Device:
Repeat the previous pairing steps with your new device.
The JIB/BT5R uses a Bluetooth® 5.0 chip and has a range of up to 100 meters under optimal conditions. NOTE:
Once the JIB/BT5R is paired with a Bluetooth® device, other Bluetooth® devices cannot pair to it. There is
always a chance of interference with any Bluetooth® connection. Bluetooth® is in the same frequency band
as many cell phones and WiFi routers. These have higher outputs than Bluetooth® and can cause interference.
4
Receiver Setup
Receiver Setup
1. Pair Your Receiver:
Before connecting the receiver to equipment, it is easiest to go through the pairing process first. If Stereo-Linking two
receivers, link the receivers together first as well.
2. Connecting To Equipment:
Plug into any active speaker, amp, or mixer that has XLR Input connections.
NOTE: You can connect to most mixers, amplifiers or other devices that accept line-level inputs.
3. Power:
Make sure the receiver is charged before each use. Alternatively, you can plug the receiver into a power source using
the included micro USB cable for continuous power while in use.
4. Adjusting Levels:
Volume can be controlled with the Bluetooth enabled device, most active speakers, amps, and mixers. ®
NOTE: It is recommended to adjust the volume of devices in the following order:
1. Adjust the Bluetooth® enabled device volume higher.
2. If using a mixer, first adjust the input channel levels and then its main output level.
3. The active Speaker/Amp should be the last volume adjustment.
5. PAD Switch:
When plugged into Mic level input, the pad switch can be engaged for appropriate sensitivities. Lowering the input
signal sensitivity can help to avoid signal overload and distortions.
5
Specifications
Specifications
Bluetooth® Version: V5.0
Frequency Range: 2.4GHz - 2.48GHz
Input Connector: Micro USB Charging Input
Output Connector: XLR/M
PAD Switch, Bluetooth® Pair/Stereo-Link ButtonControls:
Charging LED, Stereo-Link/Pair LEDIndicators:
-80dBm < +/-0.1% BERSensitivity:
Signal to Noise: >75dB
Total Harmonic Distortion: <0.1%
Operating Range: Under Typical Conditions 328' (100 m)
Note: actual range depends on RF signal absorption,
reflection, interference, and battery characteristics
Operating Temperature: Range -40º F to 176º F (-40 Cº to +80 Cº)
Note: battery characteristics may limit this range
4.9" x 1.32" x 1.1" (124 x 33.4 x 27.5 mm)(HxWxD)Dimensions:
3.35 oz (95 g)Weight:
Power Requirements: Internal 3.7V Rechargeable Lithium Battery Power Supply
Battery Operation: About 10 hours
Included Accessories: Micro USB charging cable
6
SUPERIOR SOUND FOR YOU
THRE E YEA R LIMIT ED WA RR ANT Y
WARRANTY Information can be viewed online at
https://www.galaxyaudio.com/support/warranty
www.galaxyaudio.com/support/warranty
JIB/BT5R
USER’S M A NUAL
Specifications in this manual are subject to change without notice.