Galaxy Audio HS4 Quick Start Manual
GAL A X Y AUDIO Quick Start Guide
Included Components
1. HS4 x1
3. Quick Start Guide x1
2. SA-1 Stand Adapter x1
1.
3.2.
Attach the SA-1 to the mic stand
1
Stand Mounting (Optional)
3
Lift the HS4 over the stand, align it up
with the hole.
Bring the HS4 down onto the stand
gently until secure.
2
Setup
Connect one end of a 1/4" cable to
either 1/4" input, and the other end to
your powered amplifier.
2
To Daisy Chain:
Connect one end of a 1/4" cable to either 1/4" input, and the other end to either 1/4" input on the other HS4. Repeat for any other HS4's being Daisy Chained.
1
8 Ohms for 2 Hot Spots
5.33 Ohms for 3 Hot Spots
4 Ohms for 4 Hot Spots
(The Total Load)
For more details on
Ohm’s Law, Scan Here:
GALAX Y AUDIO Quick Start Guide
Included Components
1. HS4 x1
3. Quick Start Guide x1
2. SA-1 Stand Adapter x1
1.
3.2.
Attach the SA-1 to the mic stand
1
Stand Mounting (Optional)
3
Lift the HS4 over the stand, align it up
with the hole.
Bring the HS4 down onto the stand
gently until secure.
2
Setup
Connect one end of a 1/4" cable to
either 1/4" input, and the other end to
your powered amplifier.
2
To Daisy Chain:
Connect one end of a 1/4" cable to either 1/4" input, and the other end to either 1/4" input on the other HS4. Repeat for any other HS4's being Daisy Chained.
1
8 Ohms for 2 Hot Spots
5.33 Ohms for 3 Hot Spots
4 Ohms for 4 Hot Spots
(The Total Load)
For more details on
Ohm’s Law, Scan Here:
Specifications subject to change without notice.
V20151123
601 E. Pawnee Wichita, KS 67211 316. 263.2852 FAX 316.263.0642 www.galaxyaudio.com
Distributed in Canada by Audio Distributors International (ADI) 1275 Newton, unit 6 Boucherville, QC J4B 5H2 Canada
450.449.8177 FAX 450.449.8180
Other Helpful Sources
HS4
Manual
(PDF Download)
HS4
Product Page
HS4
Cutsheet
(PDF Download)
HS4
How To Video
Quick Start Guide
TM
FAQ
1. Q. How many HS4 can I connect together?
A. It depends on your amplifiers rating. If it is rated to run at 4ohms, the maximum number of HS4 is 4, if your amp is
rated to 2 ohms, you could use up to 8 HS4.
Printed in China
Loading...