Galaxy Audio Any Spot AS-1100, Any Spot AS-1100R, Any Spot AS-1100T User Manual

www.galaxyaudio.com/AS1100.php
USER'S MANUAL
READ these instructions. KEEP these instructions. HEED all warnings. FOLLOW all instructions. DO NOT use this apparatus near water. CLEAN ONLY with dry cloth. DO NOT block any ventilation openings. Install in accordance with the manu­facturer's instructions. DO NOT install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. DO NOT defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wider blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
ONLY USE attachments/accessories specified by the manufacturer.1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11. UNPLUG this apparatus during lightning storms or when unused for long periods of time. REFER all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is dam­aged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
DO NOT expose the apparatus to dripping and splashing. DO NOT put objects filled with liquids, such as vases, on the apparatus.
Remove the batteries from the receiver if the system will not be used for a long period of time. This will avoid any damage resulting from a defective, leaking battery. DO NOT throw used batteries into a fire. Be sure to dispose of or recycle used batteries in accordance with local waste disposal laws.
12.
13.
14.
15.
16.
LICENSING INFORMATION
THIS RADIO EQUIPMENT IS INTENDED FOR USE IN PROFESSIONAL ENTERTAINMENT AND SIMILAR APPLICATIONS.
Changes or modifications not expressly approved by Galaxy Audio Incorporated could void your authority to operate the equipment. Licensing of Galaxy Audio wireless microphone equipment is the user's responsibility, and licensability depends on the user's classification and application, and on the selected frequency. Galaxy Audio strongly urges the user to contact the appropriate telecommunications authority concerning proper licensing, and before choosing and ordering frequencies.
NOTE: THIS EQUIPMENT MAY BE CAPABLE OF OPERATING ON SOME FREQUENCIES NOT AUTHORIZED IN YOUR REGION. PLEASE CONTACT YOUR NATIONAL AUTHORITY TO OBTAIN INFORMATION ON AUTHORIZED FREQUENCIES FOR WIRELESS MICROPHONE PRODUCTS IN YOUR REGION
Licensing: Note that a ministerial license to operate this equipment may be required in certain
areas. Consult your national authority for possible requirements.
In order to use this system safely, avoid prolonged listening at excessive sound pressure levels. Please use the following guidelines established by
the Occupational Safety Health Administration (OSHA) on maximum time exposure to sound pressure levels before hearing damage occurs.
90 dB SPL at 8 hours 95 dB SPL at 4 hours 100 dB SPL at 2 hours 105 dB SPL at 1 hour
110 dB SPL at ½ hour 115 dB SPL at 15 minutes 120 dB SPL — avoid or damage may occur
USING THIS SYSTEM AT EXCESSIVE VOLUMES CAN CAUSE PERMANENT HEARING DAMAGE. USE AS LOW A VOLUME AS POSSIBLE.
W
ARNING!
It is difficult to measure the exact Sound Pressure Levels (SPL) present at the eardrum in live applications. In addition to the volume setting on the Personal Monitors, the SPL in the ear is affected by ambient sound from floor wedges or other devices. The isolation provided by the fit of quality
Here are some general tips to follow in the use of this product to protect your ears from damage.
• Turn up the volume control only far enough to hear properly.
• Ringing in the ears may indicate that the gain levels are too high. Try lowering the gain levels.
• Have your ears checked by an audiologist on a regular basis. If you experience wax buildup in your ears, stop using the system until an audiologist has examined your ears.
• Wipe the ear molds with an antiseptic before and after use to avoid infections. Stop using the earphones if they are causing great discomfort or infection.
earpieces is also an important factor in determining the SPL.
FCC Consumer Alert for Wir eless Mic rophone s (U.S.)
Most users do not need a l icense to o perate th is wirele ss microphone system. Nevertheless, operating this mic rophone s ystem wit hout a lice nse is subject to certain restrictions: the sys tem may not cause harmful in terfere nce; it mus t operate a t a low power level (not in excess of 50 milliwatts); and it has no protecti on from int erferen ce receiv ed from any other device. Purchasers should also be aware that the FCC is cu rrently e valuati ng use of wir eless microphone systems, and these rules are subject to change.
For more informati on, call th e FCC at 1-88 8-CALL- FCC (TTY: 1-888-TELL-FCC) or visit the FCC's wireless microph one websi te at www.fc c.gov/c gb/wire lessmicrophones
2
System Components
System Components
All AS-1100 systems include the following components:
AS-1100T Transmitter AS-1100R Receiver Power Supply One Pair EB-3 Earbuds One Antenna Rack Ears User Manual
Thank you for choosing a Galaxy Audio Wireless Personal Monitor system. You have joined thousands of other satisfied customers. Our years of professional experience in design and manufacturing ensure our products' quality, performance and reliability.
Introduction
Introduction
SET
3
Headphone Jack.
Headphone Output Level Control. Turn left to decrease the level, turn right to increase the level.
LCD screen. Please See (System Setup) on page 4.
Transmitter Menu Up Button. Please See (System Setup) on page 4.
Front Panel:
Back Panel:
Transmitter Menu Down Button. Please See (system setup) on page 4.
Transmitter Set Button. Please See (System Setup) on page 4.
On/Off Switch. Press and hold two seconds to turn On, press and hold to turn Off.
AS-1100T Transmitter Features:
AS-1100T Transmitter Features:
1
1
2
2
3
3
4
4
5
5
6
6
7
7
1
2
3
4
5
6
7
DC Power Input Jack.
Stereo/Mono Switch. Stereo position preserves Left/Right signals throughout system. Mono position mixes Left/Right signals together.
Left Channel XLR/1/4" Combo Input Jack.
Right Channel XLR/1/4" Combo Input Jack.
Left Channel Input Level Control.
Right Channel Input Level Control.
Antenna Jack. 50 ohms.
1 2 3 4 5 6 7
4
9
9
8
8
A F A F
GROUP CHANNE L
MH z
R
L
A F A F
GROUP CHANNE L
MH z
R
L
A F A F
GROUP CHANNE L
MH z
R
L
A F A F
GROUP CHANNE L
MH z
R
L
R
GRO UP C HANNE L
MH z
STE REO M ONO
F
A F
R
GRO UP C HANNE L
MH z
STE REO M ONO
F
A F
GRO UP C HANNE L
MH z
STE REO M ONO
R F A F
2
GRO UP C HANNE L
MH z
STE REO M ONO
R F A F
R
GRO UP C HANNE L
MH z
STE REO M ONO
F
A F
System Setup
System Setup
Receiver screen
Transmitter Programming:
Select a Group and/o r Channel :
Press SET button. Whi le Group nu mber is fla shing, press or
button to select a gro up as shown i n . Then pr ess SET button
again. While Chann el number i s flashin g, press or button to
select a Channel, as s hown in .
Note: When using mul tiple sys tems, for o ptimum re sults set all
of the systems to the sa me group nu mber and se lect a different
channel number for e ach syste m in that gro up.
Audio Inp ut Level Di splay:
Displays left and ri ght chann el audio in put level , as shown in .
Full Disp lay:
Displays left and ri ght chann el audio in put level s and selected frequency, as sho wn in .
Note: Adjust audio inp ut leve ls to peak on only the l oudes t signals.
Body Pack Receiver Programming
Select a Group and/o r Channel :
Press and hold SET button. Wh ile GROUP number i s flashin g, press or button to select a Group as shown in . Then press SET again. While CHANN EL is f lashing , press or button to select a channel, as s hown in .
Battery Status:
Five level Battery S tatus Ind icator, as s hown in . Replace batteries when indicator sta rts blink ing.
Stereo/Mono Mode D isplay:
The STEREO or MONO ind icator wi ll automa tically light to display the type of si gnal bein g receive d, as selec ted on the Transmitte r.
Full Disp lay:
Displays Battery S tatus, RF /Audio Le vel, Stereo/Mono Mode and Selected Fr equency, as shown i n .
1
1
5
5
6
6
7
7
2
2
3
3
4
4
5
GRO UP C HANNE L
MH z
STE REO M ONO
R F A F
SET
-
+
+
-
15
G
ROU
P
CHA
N
N
E
L
M
H
z
S
T
E
R
EO
M
O
N
O
R
F
A
F
SET
Features:
Antenna.
RF Signal LED. Lights when RF Signal is received.
Earphone Jack.
Output Level Control and On/Off Switch.
LCD Screen. Please See (System Setup) on page 4.
Receiver Menu Down Button. Please See (System Setup) on page 4.
Receiver programming SET Button. Please See (System Setup) on page 4.
Receiver Menu Up Button. Please See (System Setup) on page 4.
Wearing the Body Pack Receiver
Clip the receiver to a belt. For best results, slide the receiver until the belt is pressed against the base of the clip.
Changing Batteries
Expected life for two Alkaline batteries is approximately 6 hours. When the LCD Battery Indicator is flashing (see below), the batteries should be changed immediately, as shown on the left.
5
Body Pack Receiver
Body Pack Receiver
1
2
3
4
5
6
7
8
87
6
5
4321
System
Band: UHF Frequency Range: CODE D 584~607 MHz CODE L 655~679 MHz Transmitter Output Level: 10dBm Operating Range Under Typical Conditions
300' (92m) Note: Actual range depends on RF signal absorption, reflection, and interference.
Audio Frequency Response: +/-3dB 60Hz~16KHz Total Harmonic Distortion: +/-30KHz deviation
1KHz tone <1%
Dynamic Range: >90dB A-weighted Operating Temperature Range:
14ºF to 122ºF (-10º C to +50º C) Note: battery characteristics may limit this range
Transmitter
Max Audio input level: +6dBV Gain Adjustment Range: 40dB Input Impedance: 100KΩ Dimensions: 1.5" x 8.3" x 3.78"
(38 x 212 x 96mm) (HWD)
Weight: 21oz. (605g) Power Requirements: 12-18 VDC at
300 mA (supplied by external power supply)
XLR input:
Impedance balanced Pin1 Ground (cable shield) Pin2 Audio Pin3 No Audio
Body Pack Receiver
Audio Output Level: 100mW Sensitivity: -94dBm for 30dB Image Rejection: >55dB Dimensions: 3.74" x 2.6" x 1"
(95 x 65 x 25mm) (HWD)
Weight: 3.5oz. (100g) without batteries Power Requirements: 2 (AA) size
alkaline or rechargeable batteries
Battery Life: About 5 hours
Specifications
Specifications
AS-EXTBNC - BNC Connector and Cable for front mounting the antennas on the DHTQUAD.
AS-ANTBNC - Replacement BNC Antenna for use with Galaxy Audio Wireless Personal
Monitors. (Part number will vary based on the Frequency Code of specific unit)
AS-CLIP911R - Replacement Belt Clip for AS-900, AS-1100, MBP52, & MBP64
PS-13.5-.35.5 - 600mA Replacement Power Supply for AS-900, AS-1100, AS-1800, VES,
VSC, ECD, ECM, PSE, & DHT.
EB3S - Replacement Sleeves for EB-3 Ear Buds. 5 pair in each pack. Available in Small, Medium, or Large.
MRE900/1100 - Replacement Single Rack Kit for AS-900 & AS-1100: 2 pieces with screws.
BATTCVR11005264 - Replacement Battery Cover for AS-1100 Body Pack.
EB3 - Ear buds which come standard with our Wireless Personal Monitor Systems with 1/8" -
3.5mm Jack.
AS-UA12-14.5 - 1000mA Universal Power Supply for Replacement Power Supply for AS-900, AS-1100, AS-`1800, VES, VSC, ECD, ECM, PSE, DHT, DHTRQUAD, & CTS. Includes adapters for most other countries.
ANT-PDL - Directional antenna used to decrease interference to other equipment. Frequency range 500-900MHz The UHF wide-band (500-900 MHz) directional LPDA (log periodic dipole array) antenna reduces outside interference while providing increased send/receive signal range. Each antenna paddle is matched to 50 ohms impedance with a low-loss BNC connector; 7dBi gain. For permanent or temporary installation; mounts to 5/8"-27 threads.
Many of these parts and accessories may be found and purchased from the Galaxy Audio website in either the Galaxy Store (www.galaxyaudio.com/store.php) or in the accessories tab of each products web page.
Accessories and Replacement Parts
Accessories and Replacement Parts
6
1-800-369-7768 www.galaxyaudio.com
V20141105
Printed in China
© Copyright Galaxy Audio 2014
WARRANTY Information can be viewed online at
http://www.galaxyaudio.com/warranty.php
THRE E YEAR L IMIT ED WAR RANT Y
USER'S MANUAL
Specifications in this manual are subject to change without notice.
For the most up to date manual and information
visit www.galaxyaudio.com.
Loading...